Spallation and fragmentation cross sections for 168 MeV/nucleon Xe ions on proton, deuteron, and carbon targets

Sun, X. H.*; Wang, H.*; Otsu, Hideaki*; Sakurai, Hiroyoshi*; Ahn, D. S.*; Aikawa, Masayuki*; Fukuda, Naoki*; Isobe, Tadaaki*; Kawakami, Shunsuke*; Koyama, Shumpei*; et al.

Physical Review C, 101(6), p.064623_1 - 064623_12, 2020/06

https://doi.org/10.1103/PhysRevC.101.064623

The spallation and fragmentation reactions of Xe induced by proton, deuteron and carbon at 168 MeV/nucleon were studied at RIKEN Radioactive Isotope Beam Factory via the inverse kinematics technique. The cross sections of the lighter products are larger in the carbon-induced reactions due to the higher total kinetic energy of carbon. The energy dependence was investigated by comparing the newly obtained data with previous results obtained at higher reaction energies. The experimental data were compared with the results of SPACS, EPAX, PHITS and DEURACS calculations. These data serve as benchmarks for the model calculations.

Enhancement of the methodology of repository design and post-closure performance assessment for preliminary investigation stage, 3; Progress report on NUMO-JAEA collaborative research in FY2013 (Joint research)

Shibata, Masahiro; Sawada, Atsushi; Tachi, Yukio; Makino, Hitoshi; Wakasugi, Keiichiro; Mitsui, Seiichiro; Kitamura, Akira; Yoshikawa, Hideki; Oda, Chie; Ishidera, Takamitsu; et al.

JAEA-Research 2014-030, 457 Pages, 2015/03

JAEA-Research-2014-030.pdf:199.23MB

JAEA and NUMO have conducted a collaborative research work which is designed to enhance the methodology of repository design and post-closure performance assessment in preliminary investigation stage. With regard to (1) study on rock suitability in terms of hydrology, based on some examples of developing method of hydro-geological structure model, acquired knowledge are arranged using the tree diagram, and model uncertainty and its influence on the evaluation items were discussed. With regard to (2) study on scenario development, the developed approach for "defining conditions" has been reevaluated and improved from practical viewpoints. In addition, the uncertainty evaluation for the effect of use of cementitious material, as well as glass dissolution model, was conducted with analytical evaluation. With regard to (3) study on setting radionuclide migration parameters, based on survey of precedent procedures, multiple-approach for distribution coefficient of rocks was established, and the adequacy of the approach was confirmed though its application to sedimentary rock and granitic rock. Besides, an approach for solubility setting was developed including the procedure of selection of solubility limiting solid phase. The adequacy of the approach was confirmed though its application to key radionuclides.

Evidence for a new nuclear "magic number" from the level structure of Ca

Steppenbeck, D.*; Takeuchi, Satoshi*; Aoi, Nori*; Doornenbal, P.*; Matsushita, Masafumi*; Wang, H.*; Baba, Hidetada*; Fukuda, Naoki*; Go, Shintaro*; Homma, Michio*; et al.

Nature, 502(7470), p.207 - 210, 2013/10

https://doi.org/10.1038/nature12522

no abstracts in English

Initial results of the large liquid lithium test loop for the IFMIF target

Kondo, Hiroo; Furukawa, Tomohiro; Hirakawa, Yasushi; Kanemura, Takuji; Ida, Mizuho; Watanabe, Kazuyoshi; Nakamura, Kazuyuki; Horiike, Hiroshi*; Yamaoka, Nobuo*; Matsushita, Izuru*; et al.

Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 8 Pages, 2013/03

http://www-naweb.iaea.org/napc/physics/FEC/FEC2012/papers/221_FTP43.pdf

Construction and initial performance tests of EVEDA (Engineering Validation and Engineering Design Activities) Lithium Test Loop (ELTL) were completed and therefore one of the major milestones in the engineering validation toward IFMIF (International Fusion Materials Irradiation Facility) was accomplished. The ELTL, which holds 2.5-ton Li, is a proto-type of a Li target facility of the IFMIF and is the largest-ever liquid lithium loop in the history of the fusion research.

Completion of IFMIF/EVEDA lithium test loop construction

Kondo, Hiroo; Furukawa, Tomohiro; Hirakawa, Yasushi; Iuchi, Hiroshi; Kanemura, Takuji; Ida, Mizuho; Watanabe, Kazuyoshi; Horiike, Hiroshi*; Yamaoka, Nobuo*; Matsushita, Izuru*; et al.

Fusion Engineering and Design, 87(5-6), p.418 - 422, 2012/08

https://doi.org/10.1016/j.fusengdes.2011.11.011

The EVEDA Li test loop (ELTL) successfully completed its construction and installation of a total of 2.5-ton Li in the frame work of the IFMIF/EVEDA as one of the ITER-BA. The construction was started on Nov. 2009 in the Oarai site of the Japan Atomic Energy Agency and completed on the middle of Nov. 2010 after passing an authority inspection by a fire department in Oarai town. Subsequently, the 2.5-ton Li was installed to the ELTL by using a glove box. The nitrogen concentration in the 2.5-ton Li was found to be 127 wppm.

Design of purification loop and traps for the IFMIF/EVEDA Li test loop; Design of cold trap

Kondo, Hiroo; Furukawa, Tomohiro; Hirakawa, Yasushi; Iuchi, Hiroshi; Ida, Mizuho; Yagi, Juro*; Suzuki, Akihiro*; Fukada, Satoshi*; Matsushita, Izuru*; Nakamura, Kazuyuki

Fusion Engineering and Design, 86(9-11), p.2437 - 2441, 2011/10

https://doi.org/10.1016/j.fusengdes.2010.12.021

Engineering Validation and Engineering Design Activities (EVEDA) for The International Fusion Materials Irradiation Facility (IFMIF) were started from July 2007 under an international agreement called ITER Broader Approach. As a major Japanese activity, EVEDA Li test loop (ELTL) to simulate hydraulic and impurity conditions of IFMIF has already designed and is under construction, in which feasibility of hydraulic stability of the liquid Li target, the purification systems of hot traps are major key issues to be validated in this loop. This paper focuses on the purification systems of the ELTL. Design of a cold trap and hot traps are discussed in this paper.

Room-temperature reactor packed with hydrophobic catalysts for the oxidation of hydrogen isotopes released in a nuclear facility

Iwai, Yasunori; Sato, Katsumi; Taniuchi, Junichi*; Noguchi, Hiroshi*; Kubo, Hitoshi*; Harada, Nobuo*; Oshima, Yusuke*; Yamanishi, Toshihiko

Journal of Nuclear Science and Technology, 48(8), p.1184 - 1192, 2011/08

https://doi.org/10.3327/jnst.48.1184

The inorganic-based hydrophobic Pt-catalyst named H1P has been developed especially for efficient oxidation of a tracer level of tritium in the ambient temperature range even in the presence of saturated water vapor. The overall reaction rate constant for H1P catalyst in the ambient temperature range was considerably larger than that for traditionally applied Pt/AlO catalyst. Moreover, the decrease in reaction rate for H1P in the presence of saturated water vapor compared with in the absence of water vapor was slight due to its excellence in hydrophobic performance. Oxidation reaction on the catalyst surface is the rate-controlling step in the ambient temperature range and diffusion in a catalyst substratum above 313 K due to its fine porosity. The overall reaction rate constant in the ambient temperature range was dependent on the space velocity and hydrogen concentration in carrier.

Detection and activity of iodine-131 in brown algae collected in the Japanese coastal areas

Morita, Takami*; Niwa, Kentaro*; Fujimoto, Ken*; Kasai, Hiromi*; Yamada, Haruya*; Nishiuchi, Ko*; Sakamoto, Tatsuya*; Godo, Waichiro*; Taino, Seiya*; Hayashi, Yoshihiro*; et al.

Science of the Total Environment, 408(16), p.3443 - 3447, 2010/06

https://doi.org/10.1016/j.scitotenv.2010.04.001

Iodine-131 (I) was detected in brown algae collected off the Japanese coast. The maximum measured specific activity of I in brown algae was 0.370.010 Bq/kg-wet. Cesium-137 (Cs) was also detected in all brown algal samples used in this study. There was no correlation between specific activities of I and Cs in these seaweeds. Low specific activity and minimal variability of Cs in brown algae indicated that past nuclear weapon tests were the source of Cs. Although nuclear power facilities are known to be pollution sources of I, there was no relationship between the sites where I was detected and the locations of nuclear power facilities. Most of the sites where I was detected were near big cities with large populations. On the basis of the results, we suggest that the likely pollution source of I, detected in brown seaweeds, is not nuclear power facilities, but nuclear medicine procedures.

Low-temperature magnetic orderings and Fermi surface properties of LaCd, CeCd, and PrCd with a caged crystal structure

Yoshiuchi, Shingo*; Takeuchi, Tetsuya*; Oya, Masahiro*; Katayama, Keisuke*; Matsushita, Masaki*; Yoshitani, Naohisa*; Nishimura, Naoto*; Ota, Hisashi*; Tateiwa, Naoyuki; Yamamoto, Etsuji; et al.

Journal of the Physical Society of Japan, 79(4), p.044601_1 - 044601_11, 2010/04

https://doi.org/10.1143/JPSJ.79.044601

Feasibility Study on Commercialization of Fast Breeder Reactor Cycle Systems Interim Report of Phase II; Technical Study Report for Reactor Plant Systems

Konomura, Mamoru; Ogawa, Takashi; Okano, Yasushi; Yamaguchi, Hiroyuki; Murakami, Tsutomu; Takaki, Naoyuki; Nishiguchi, Youhei; Sugino, Kazuteru; Naganuma, Masayuki; Hishida, Masahiko; et al.

JNC TN9400 2004-035, 2071 Pages, 2004/06

JNC-TN9400-2004-035.pdf:76.42MB

The attractive concepts for Sodium-, lead-bismuth-, helium- and water-cooled FBRs have been created through using typical plant features and employing advanced technologies. Efforts on evaluating technological prospects of feasibility have been paid for these concepts. Also, it was comfirmed if these concepts satisfy design requierments of capability and performance presumed in the feasibilty study on commertialization of Fast Breeder Reactor Systems. As results, it was concluded that the selection of sodium-cooled reactor was most rational for practical use of FBR technologies in 2015.