Refine your search:     
Report No.
 - 
Search Results: Records 1-17 displayed on this page of 17
  • 1

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Neutron shielding reinforcement in the JMTR Hot Laboratory

Ito, Masayasu; Kawamata, Kazuo; Tayama, Yoshinobu; Kanazawa, Yoshiharu; Yonekawa, Minoru; Nakagawa, Tetsuya; Omi, Masao; Iwamatsu, Shigemi

JAEA-Technology 2011-022, 44 Pages, 2011/07

JAEA-Technology-2011-022.pdf:3.29MB

Hot laboratory are facilities that execute the post irradiation examination of sample irradiated in material testing reactors etc. The handling of high burn-up fuel is scheduled in the JMTR (Japan Materials Testing Reactor) Hot Laboratory with JMTR re-operate in FY 2011. This report describes evaluation, production and installation of shielding of the hot cells in the JMTR Hot Laboratory.

JAEA Reports

Replacement of power manipulator in the No.2 concrete cells of JMTR Hot Laboratory

Iwamatsu, Shigemi; Kanazawa, Yoshiharu; Hayashi, Koji; Sozawa, Shizuo; Nakagawa, Tetsuya

JAEA-Testing 2009-006, 17 Pages, 2010/03

JAEA-Testing-2009-006.pdf:6.0MB

This report is concerned with replacement of the power manipulator in the No.2 concrete cell of JMTR Hot Laboratory in the 2008 fiscal year. It was carried out the replacement of power manipulator mainly on a chassis part including the remarkably aged wrist, shoulder and controller. The specifications of the machinery to be replaced, the installation and the acceptance inspection were described.

JAEA Reports

Plan and reports of coupled irradiation (JRR-3 and JOYO of research reactors) and hot facilities work (WASTEF, JMTR-HL, MMF and FMF); R&D project on irradiation damage management technology for structural materials of long-life nuclear plant

Matsui, Yoshinori; Takahashi, Hiroyuki; Yamamoto, Masaya; Nakata, Masahito; Yoshitake, Tsunemitsu; Abe, Kazuyuki; Yoshikawa, Katsunori; Iwamatsu, Shigemi; Ishikawa, Kazuyoshi; Kikuchi, Taiji; et al.

JAEA-Technology 2009-072, 144 Pages, 2010/03

JAEA-Technology-2009-072.pdf:45.01MB

"R&D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant" was carried out from FY2006 in a fund of a trust enterprise of the Ministry of Education, Culture, Sports, Science and Technology. The coupled irradiations or single irradiation by JOYO fast reactor and JRR-3 thermal reactor were performed for about two years. The irradiation specimens are very important materials to establish of "Evaluation of Irradiation Damage Indicator" in this research. For the acquisition of the examination specimens irradiated by the JOYO and JRR-3, we summarized about the overall plan, the work process and the results for the study to utilize these reactors and some facilities of hot laboratory (WASTEF, JMTR-HL, MMF and FMF) of the Oarai Research-and-Development Center and the Nuclear Science Research Institute in the Japan Atomic Energy Agency.

JAEA Reports

Renewal plan of the JMTR Hot Laboratory for the irradiation test of high burn-up fuels in FY2008

Sozawa, Shizuo; Nakagawa, Tetsuya; Iwamatsu, Shigemi; Hayashi, Koji; Tayama, Yoshinobu; Kawamata, Kazuo; Yonekawa, Minoru; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Omi, Masao

JAEA-Technology 2009-070, 27 Pages, 2010/03

JAEA-Technology-2009-070.pdf:7.46MB

Refurbishment of the Japan Materials Testing Reactor (JMTR), which is recognized as one of important facilities in Japan for safety research, is in progress by the JAEA. In Extensive safety research of light-water reactor (LWR) fuels and materials under a contract with the Nuclear and Industrial Safety Agency of Ministry of Economy, Trade and Industry of Japan, the irradiation tests are planned in order to examine integrity of the LWR fuels and structure materials. For the irradiation tests of high burnup fuels and irradiated materials in the JMTR, modification of the hot laboratory facilities are needed, which are (1) making of application books for strengthening JMTR hot-lab. cell-shielding, (2) the capsule assembling device of detailed design, (3) safety analysis for domestic transportation cask and (4) confirmatory testing of diamond drill of fuel-rod center-hole processing device.

JAEA Reports

Renewal plan of the JMTR Hot Laboratory for the Irradiation test of high burn-up fuels in FY2007

Sozawa, Shizuo; Nakagawa, Tetsuya; Omi, Masao; Hayashi, Koji; Iwamatsu, Shigemi; Kawamata, Kazuo; Kato, Yoshiaki; Kanazawa, Yoshiharu

JAEA-Technology 2009-069, 32 Pages, 2010/03

JAEA-Technology-2009-069.pdf:7.33MB

Refurbishment of the Japan Materials Testing Reactor (JMTR), which is recognized as one of important facilities in Japan for safety research, is in progress by the JAEA. In Extensive safety research of light-water reactor (LWR) fuels and materials under a contract with the Nuclear and Industrial Safety Agency of Ministry of Economy, Trade and Industry of Japan, the irradiation tests are planned in order to examine integrity of the LWR fuels and structure materials. For the irradiation tests of high burnup fuels and irradiated materials in the JMTR, modification of the hot laboratory facilities are needed, which are (1) strengthening JMTR hot-lab. cell-shielding, (2) the capsule assembling device, (3) domestic transportation cask, (4) fuel-rod center-hole processing device, (5) master-slave manipulators, (6) power manipulator, and (7) scanning electron microscope.

JAEA Reports

Investigation and design of the dismantling process of irradiation capsules containing tritium, 2; Detailed design and trial fabrication of capsule dismantling apparatus and investigation of glove box facility

Hayashi, Kimio; Nakagawa, Tetsuya; Onose, Shoji; Ishida, Takuya; Nakamichi, Masaru; Katsuyama, Kozo; Iwamatsu, Shigemi; Hasegawa, Teiji; Kodaka, Hideo; Takatsu, Hideyuki; et al.

JAEA-Technology 2009-007, 168 Pages, 2009/03

JAEA-Technology-2009-007.pdf:31.88MB

In-pile functional tests of breeding blankets have been planned by Japan Atomic Energy Agency (JAEA), using a test blanket module (TBM) which will be loaded in the International Thermonuclear Experimental Reactor (ITER). In preparation for the in-pile functional tests, JAEA has been being performed irradiation experiments of lithium titanate (Li$$_{2}$$TiO$$_{3}$$), which is the first candidate of solid breeder materials for the blanket of the demonstration reactor (DEMO) under designing in Japan. The present report describes (1) results of a detailed design and trial fabrication tests of a dismantling apparatus for irradiation capsules which were used in irradiation experiments by the Japan Materials Testing Reactor (JMTR) of JAEA, and (2) results of a preliminary investigation of a glove box facility for post-irradiation examinations (PIEs). In the detailed design of the dismantling apparatus, datailed specifications and the installation methods were examined, based on results of a conceptual design and basic design. In the trial fabrication, cutting tests were curried out by making a mockup of a cutting component. Furthermore, a preliminary investigation of a glove box facility was carried out in order to secure a facility for PIE work after the capsule dismantling, which revealed a technical feasibility.

JAEA Reports

Development of welding techniques for assembling of IASCC Test Capsule

Shibata, Akira; Kawamata, Kazuo; Taguchi, Taketoshi; Kaji, Yoshiyuki; Shimizu, Michio*; Kanazawa, Yoshiharu; Matsui, Yoshinori; Iwamatsu, Shigemi; Sozawa, Shizuo; Tayama, Yoshinobu; et al.

JAEA-Technology 2008-029, 40 Pages, 2008/03

JAEA-Technology-2008-029.pdf:25.78MB

Irradiation assisted stress corrosion cracking (IASCC) is considered to be one of the key issues from a viewpoint of the life management of core components in the aged Light Water Reactors. The in-situ crack extension examination and the in-situ constant load tensile test in the reactor are required for the study of IASCC. There are, however, some technical hurdles to be overcome for the experiments. For this in-situ IASCC test, techniques for assembling pre-irradiated specimens into an capsule in a hot cell by remote handling are necessary. In this report, I describe the establishment of those remote assembling techniques and development of new welding apparatus and the TIG upset welding for stainless tube of 3 mm in thickness. Already IASCC capsules having pre-irradiated CT specimens were remotely assembled using these techniques in the hot cell for performing crack growth tests under irradiation in JMTR. And eight in-situ IASCC capsules have been finished successfully in JMTR.

JAEA Reports

Technology development on production of test specimens from irradiated capsule outer-tube and mechanical evaluation test of stainless steel with high dose carried out by the technology

Hayashi, Koji; Shibata, Akira; Iwamatsu, Shigemi; Sozawa, Shizuo; Takada, Fumiki; Omi, Masao; Nakagawa, Tetsuya

JAEA-Technology 2008-016, 51 Pages, 2008/03

JAEA-Technology-2008-016.pdf:45.58MB

The irradiation capsule 74M-52J was irradiated during total 136 cycles at reactor core of JMTR and the maximum neutron dose reached on 3.9$$times$$10$$^{26}$$n/m$$^{2}$$ at the capsule outer-tube made of a type 304 stainless steel. In order to produce mechanical test specimens from the outer tube, a punching technique was developed as a simple remote-handling method in a hot-cell. From comparison between the punching and the mechanical cutting methods, it was clarified that the punching technique was applicable to practical use. Moreover, an evaluation test of mechanical properties using specimens sampled from the 74M-52 was performed in-water high temperature condition, less than 288$$^{circ}$$C. The result shows that the residual elongation is 18% at 150$$^{circ}$$C and 13% at 288$$^{circ}$$C. It was confirmed that the type 304 stainless steel irradiated up to such high dose shows enough ductility.

JAEA Reports

Fabrication of irradiation capsule for IASCC irradiation tests, 3; Irradiation capsule for ECP sensor (Joint research)

Ide, Hiroshi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Hanawa, Satoshi; Matsui, Yoshinori; Iwamatsu, Shigemi; Kanazawa, Yoshiharu; Miwa, Yukio; Kaji, Yoshiyuki; et al.

JAEA-Technology 2008-013, 32 Pages, 2008/03

JAEA-Technology-2008-013.pdf:17.96MB

Dissolved oxygen ions and chlorine ions concentration have been used as an evaluation index of stress corrosion cracking behavior for the light water reactor materials. In addition to these parameters, Electrochemical Corrosion Potential (ECP) was commonly used as the evaluation. Therefore, as a part of the IASCC irradiation tests, the irradiation test of the iron oxide type and the platinum type of ECP sensor were carried out under the BWR coolant condition. As a result, some measurements of ECP sensor succeed. However, it was clear that the improvement of ECP sensor is necessary. In this report, developed irradiation capsule ECP sensor is reported.

Journal Articles

Remote-welding technique for assembling In-Pile IASCC capsule in hot cell

Kawamata, Kazuo; Ishii, Toshimitsu; Kanazawa, Yoshiharu; Iwamatsu, Shigemi; Omi, Masao; Shimizu, Michio; Matsui, Yoshinori; Ugachi, Hirokazu; Kaji, Yoshiyuki; Tsukada, Takashi; et al.

JAEA-Conf 2006-003, p.115 - 125, 2006/05

no abstracts in English

Journal Articles

Development of in-pile capsule for IASCC study at JMTR

Matsui, Yoshinori; Hanawa, Satoshi; Ide, Hiroshi; Tobita, Masahiro*; Hosokawa, Jinsaku; Onuma, Yuichi; Kawamata, Kazuo; Kanazawa, Yoshiharu; Iwamatsu, Shigemi; Saito, Junichi; et al.

JAEA-Conf 2006-003, p.105 - 114, 2006/05

Irradiation assisted stress corrosion cracking (IASCC) caused by the simultaneous effects of radiation, stress and high temperature water environment is considered to be one of the critical concerns of in-core structural materials not only for light water reactors (LWRs) but also for water-cooled fusion reactors. In the research field of IASCC, post-irradiation examinations (PIEs) for irradiated materials have been mainly carried out, because there are many difficulties on SCC tests under neutron irradiation environment. Hence we have embarked on a development of the test techniques for performing the in-pile SCC tests. In this paper, we describe the developed several in-pile test techniques and the current status of in-pile SCC tests at Japan Materials Testing Reactor (JMTR).

Journal Articles

Development of re-irradiation techniques using JMTR

Matsui, Yoshinori; Ide, Hiroshi; Itabashi, Yukio; Kikuchi, Taiji; Ishikawa, Kazuyoshi; Abe, Shinichi; Inoue, Shuichi; Shimizu, Michio; Iwamatsu, Shigemi; Watanabe, Naoki*; et al.

UTNL-R-0416, p.5_1 - 5_10, 2002/03

no abstracts in English

Journal Articles

Post-irradiation annealing and re-irradiation technique for LWR reactor pressure vessel material

Matsui, Yoshinori; Ide, Hiroshi; Itabashi, Yukio; Kikuchi, Taiji; Ishikawa, Kazuyoshi; Abe, Shinichi; Inoue, Shuichi; Shimizu, Michio; Iwamatsu, Shigemi; Watanabe, Naoki*; et al.

KAERI/GP-195/2002, p.33 - 40, 2002/00

Studies on the irradiation damage of the material of the RPV are inevitable for the LWR. Recently, the researches of annealing effect on the irradiation damage of RPV material were extensively carried out using specimens irradiated in the JMTR of the JAERI. As the next step, an annealing test of irradiated specimens and re-irradiation of annealed specimens were planned. The aim of the test is to evaluate the effect of annealing by comparing the damage of irradiated specimen, its recovery by annealing and the damage after re-irradiation. For the re-irradiation test of this study, JAERI developed a new capsule in which the specimens can be exchanged before and after annealing, and, re-irradiated afterward. The development of the capsule consisted of the design and fabrication of airtight connector for thermocouples and mechanical seal device which was fit to remote handling. Remote operation procedures for handling the radioactive capsule and for exchanging specimens were carefully performed. The results of the re-irradiation proved that the development was technically successful.

JAEA Reports

Development of welding technique by remote control at the JMTR hot laboratory

Shimizu, Michio; Iwamatsu, Shigemi; Takada, Fumiki; Sozawa, Shizuo; Kawamata, Kazuo; Oshima, Kunio; Tsuchiya, Kunihiko; Yamaura, Takayuki; Matsui, Yoshinori; Iwai, Takashi; et al.

JAERI-Tech 2000-029, p.48 - 0, 2000/03

JAERI-Tech-2000-029.pdf:9.26MB

no abstracts in English

Oral presentation

R&D project on irradiation damage management technology for structural materials of long-life nuclear plant, 2; Plan and execution of coupling irradiation (JRR-3 and JOYO) and Hot facilities work (WASTEF, JMTR-HL, MMF and FMF)

Matsui, Yoshinori; Nabeya, Hideaki; Kusunoki, Tsuyoshi; Takahashi, Hiroyuki; Aizawa, Masao; Nakata, Masahito; Numata, Masami; Usami, Koji; Endo, Shinya; Ito, Kazuhiro; et al.

no journal, , 

We are proceeding with the study of "R&D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant". For the study, it is important that the irradiated specimens are gotten by the coupling of JRR-3 and JOYO. This reports the total irradiation plan in the study, and the executed work for the coupling irradiation (JRR-3 and JOYO) including the Hot facilities work of Tokai and Oarai in the 2006 fiscal year.

Oral presentation

R&D project on irradiation damage management technology for structural materials of long-life nuclear plant, 2; Reports of coupling irradiation (JRR-3 and JOYO) and hot facilities work (WASTEF, JMTR-HL, MMF and FMF)

Matsui, Yoshinori; Takahashi, Hiroyuki; Ichise, Kenichi; Usami, Koji; Endo, Shinya; Iwamatsu, Shigemi; Yonekawa, Minoru; Ito, Kazuhiro; Yamamoto, Masaya; Soga, Tomonori; et al.

no journal, , 

"R&D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant" was carried out from 2006 fiscal year in a fund of a trust enterprise of the Ministry of Education, Culture, Sports, Science and Technology. The coupling irradiations or single irradiations by JOYO fast reactor and JRR-3 fission reactor were performed for about two years. The irradiation specimens are the very important materials to establish of "Evaluation of Irradiation Damage Indicator" in this research. For the acquisition of the examination specimens irradiated by the JOYO and JRR-3, we will present about the overall plan, work process and the results for the study to utilize these reactors and some facilities of hot laboratory (WASTEF, JMTR-HL, MMF and FMF) of the Oarai Research-and-Development Center and the Nuclear Science Research Institute in the Japan Atomic Energy Agency.

Oral presentation

Refurbishment and restart of JMTR, 6; Development of new irradiation facilities, 3; Post irradiation examination facilities

Ito, Masayasu; Kawamata, Kazuo; Iwamatsu, Shigemi; Hayashi, Koji; Kanazawa, Yoshiharu; Nakagawa, Tetsuya

no journal, , 

no abstracts in English

17 (Records 1-17 displayed on this page)
  • 1