Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
compoundsFrazer, D.*; Saleh, T. A.*; Matsumoto, Taku; Hirooka, Shun; Kato, Masato; McClellan, K.*; White, J. T.*
Nuclear Engineering and Design, 423, p.113136_1 - 113136_7, 2024/07
Nanoindentation based techniques can be employed on minute volumes of material to measure mechanical properties, including Young's modulus, hardness, and creep stress exponents. In this study, (U,Ce)O solid solutions samples are used to develop elevated temperature nanoindentation and nanoindentation creep testing methods for use on mixed oxide fuels. Nanoindentation testing was performed on 3 separate (Ux-1,Cex)O compounds ranging from x equals 0.1 to 0.3 at up to 800 
C: their Young's modulus, hardness, and creep stress exponents were evaluated. The Young's modulus decreases in the expected linear manner while the hardness decreases in the expected exponential manner. The nanoindentation creep experiments at 800 C give stress exponent values, n=4.7-6.9, that suggests dislocation motion as the deformation mechanism.
Sala, G.*; Stone, M. B.*; Hal
sz, G. B.*; Lumsden, M. D.*; Fay, A, F,*; Pajerowski, D. M.*; Kawamura, Seiko; Kaneko, Koji; Mazzone, D. G.*; Simutis, G.*; et al.
Communications Physics (Internet), 6, p.234_1 - 234_7, 2023/08
Times Cited Count：0 Percentile：0(Physics, Multidisciplinary)Wei, D.*; Gong, W.; Tsuru, Tomohito; Lobzenko, I.; Li, X.*; Harjo, S.; Kawasaki, Takuro; Do, H.-S.*; Bae, J. W.*; Wagner, C.*; et al.
International Journal of Plasticity, 159, p.103443_1 - 103443_18, 2022/12
Times Cited Count：28 Percentile：98.38(Engineering, Mechanical)Wei, D.*; Gong, W.; Wang, L.*; Tang, B.*; Kawasaki, Takuro; Harjo, S.; Kato, Hidemi*
Journal of Materials Science & Technology, 129, p.251 - 260, 2022/12
Times Cited Count：18 Percentile：94.44(Materials Science, Multidisciplinary)
neutron diffractionWei, D.*; Gong, W.; Tsuru, Tomohito; Kawasaki, Takuro; Harjo, S.; Cai, B.*; Liaw, P. K.*; Kato, Hidemi*
International Journal of Plasticity, 158, p.103417_1 - 103417_17, 2022/11
Times Cited Count：24 Percentile：97.35(Engineering, Mechanical)Wei, D.*; Gong, W.; Kawasaki, Takuro; Harjo, S.; Kato, Hidemi*
Scripta Materialia, 216, p.114738_1 - 114738_6, 2022/07
Times Cited Count：22 Percentile：96.95(Nanoscience & Nanotechnology)Kato, Atsushi; Yamamoto, Tomohiko; Ando, Masato; Chikazawa, Yoshitaka; Murakami, Hisatomo*; Oyama, Kazuhiro*; Kaneko, Fumiaki*; Higurashi, Koichi*; Chanteclair, F.*; Chenaud, M.-S.*; et al.
EPJ Nuclear Sciences & Technologies (Internet), 8, p.11_1 - 11_10, 2022/06
This paper provides an overview of plant system studies to establish a common technical view for Sodium-cooled Fast Reactor concept between France and Japan based on ASTRID600 and the new concept with downsized output called ASTRID150. One of important issues on a reactor structure design is to enhance seismic resistance to be tolerable against strong earthquake such that postulated in Japan. A concept of High Frequency Design is shared, and the design options related to HFD have been examined and design recommendations are established. In addition, this paper include results of studies for a steam generator, a decay heat removal system, a fuel handling system and a containment vessel.
Kato, Tomoaki; Kozai, Naofumi; Tanaka, Kazuya; Kaplan, D. I.*; Utsunomiya, Satoshi*; Onuki, Toshihiko
Journal of Nuclear Science and Technology, 59(5), p.580 - 589, 2022/05
Times Cited Count：4 Percentile：55.52(Nuclear Science & Technology)This study reports the effect of fulvic acids, which is a natural organic substance generally contained in groundwater, on the oxidation states of radioactive iodine anions (iodide and iodate). Iodide and iodate are contained in the contaminated water of the Fukushima Daiichi Nuclear Power Plant and supposed to be removed by activated carbon (AC) via adsorption. When fulvic acids does not exist in the experimental system, the adsorption of iodide on AC was less than that of iodate and their oxidation states after the adsorption were not changed. When fulvic acids existed, a fraction of the adsorbed iodate was reduced to iodide. This result indicates that the reduction of the adsorbed iodate progresses during the storage of the spent AC.
Jensen, C. B.*; Wachs, D. M.*; Woolstenhulme, N. E.*; Ozawa, Takayuki; Hirooka, Shun; Kato, Masato
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 9 Pages, 2022/04
Wei, D.*; Wang, L.*; Zhang, Y.*; Gong, W.; Tsuru, Tomohito; Lobzenko, I.; Jiang, J.*; Harjo, S.; Kawasaki, Takuro; Bae, J. W.*; et al.
Acta Materialia, 225, p.117571_1 - 117571_16, 2022/02
Times Cited Count：61 Percentile：99.71(Materials Science, Multidisciplinary)
X raysOkumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I. H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.
Physical Review Letters, 127(5), p.053001_1 - 053001_7, 2021/07
Times Cited Count：15 Percentile：80.44(Physics, Multidisciplinary)We observed electronic X rays emitted from muonic iron atoms using a superconducting transition-edge-type sensor microcalorimeter. The energy resolution of 5.2 eV in FWHM allowed us to observe the asymmetric broad profile of the electronic characteristic 
and 
X rays together with the hypersatellite X rays around 6 keV. This signature reflects the time-dependent screening of the nuclear charge by the negative muon and the 
-shell electrons, accompanied by electron side-feeding. Assisted by a simulation, this data clearly reveals the electronic - and -shell hole production and their temporal evolution during the muon cascade process.
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.
Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03
Times Cited Count：44 Percentile：97.1(Astronomy & Astrophysics)Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.
Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji; Ganovichev, D. A.*; Baklanov, V. V.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
In order to ensure In-Vessel Retention (IVR) of molten-core in Core Disruptive Accident (CDA), we are investigating the possibility of the molten-core discharge through the control rod guide tube (CRGT) to prevent energetics due to exceeding the prompt criticality. Internal structures of the CRGT, such as a sodium-flow regulator when the CRGT is connected to the high-pressure plenum, may disturb the discharge of molten-core from the core region. Based on above background, an experimental program to clarify characteristics of molten-core discharge through the CRGT has been commenced as one of subjects under a joint study with National Nuclear Center of the Republic of Kazakhstan (NNC-RK) named EAGLE-3 project. An experiment using molten-alumina as fuel simulant and sodium was conducted at the out-of-pile test facility owned by NNC-RK to investigate sodium cooling effect around the sodium flow regulator on its destruction. The experimental result represented that void development at the initiation of molten-alumina discharge eliminated liquid-phase sodium from the discharge path and this also eliminated sodium cooling effect around the sodium flow regulator. As a result, early destruction of the sodium flow regulator and massive discharge of molten alumina occurred in turn.
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Arai, Takehiko*; Nakauchi, Yusuke*; Nakamura, Tomoki*; Matsuoka, Moe*; et al.
Science, 364(6437), p.272 - 275, 2019/04
Times Cited Count：262 Percentile：99.73(Multidisciplinary Sciences)The near-Earth asteroid 162173 Ryugu, the target of Hayabusa2 sample return mission, is believed to be a primitive carbonaceous object. The Near Infrared Spectrometer (NIRS3) on Hayabusa2 acquired reflectance spectra of Ryugu's surface to provide direct measurements of the surface composition and geological context for the returned samples. A weak, narrow absorption feature centered at 2.72 micron was detected across the entire observed surface, indicating that hydroxyl (OH)-bearing minerals are ubiquitous there. The intensity of the OH feature and low albedo are similar to thermally- and/or shock-metamorphosed carbonaceous chondrite meteorites. There are few variations in the OH-band position, consistent with Ryugu being a compositionally homogeneous rubble-pile object generated from impact fragments of an undifferentiated aqueously altered parent body.
Shibata, Taiju; Mizuta, Naoki; Sumita, Junya; Sakaba, Nariaki; Osaki, Takashi*; Kato, Hideki*; Izawa, Shoichi*; Muto, Takenori*; Gizatulin, S.*; Shaimerdenov, A.*; et al.
Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10
Graphite materials are used for the in-core components of High Temperature Gas-cooled Reactor (HTGR). Oxidation damage on the graphite components in air ingress accident is a crucial issue for the safety point of view. SiC coating on graphite surface is a possible technique to enhance oxidation resistance. However, it is important to confirm the integrity of this material against high temperature and neutron irradiation for the application of the in-core components. JAEA and Japanese graphite companies carried out the R&D to develop the oxidation-resistant graphite. JAEA and INP investigated the irradiation effects on the oxidation-resistant graphite by using a framework of ISTC partner project. This paper describes the results of post irradiation experiment about the neutron irradiated SiC-coated oxidation-resistant graphite. A brand of oxidation-resistant graphite shows excellent performance against oxidation test after the irradiation.
Seki, Yoshichika; Shinohara, Takenao; Parker, J. D.*; Yashiro, Wataru*; Momose, Atsushi*; Kato, Kosuke*; Kato, Hidemi*; Sadeghilaridjani, M.*; Otake, Yoshie*; Kiyanagi, Yoshiaki*
Journal of the Physical Society of Japan, 86(4), p.044001_1 - 044001_5, 2017/03
Times Cited Count：13 Percentile：65.98(Physics, Multidisciplinary)For the effective phase imaging at pulsed neutron sources, we have designed and developed the multi-colored Talbot-Lau interferometer which works at several wavelengths. At the Energy Resolved Neutron Imaging System RADEN in J-PARC, we demonstrated its operation by observing the visibilities of moire fringes derived from different wavelengths (0.25, 0.50, and 0.75 nm). We also investigated the variation of moire fringes dependent on the wavelength resolution from 18% to 50% and showed the advantage of pulsed beams. At the central wavelength of 0.5 nm, we have succeeded in interferometric imaging for the samples of metal rods made of aluminum, lead, and copper. An absorption grating as an analyzer was fabricated by imprinting of metallic glass for the first time, and showed a clear moire fringe with the high visibility of 68% and a well-controlled shape in comparison with previous ones fabricated by oblique evaporation of gadolinium.
Shibata, Taiju; Sumita, Junya; Sakaba, Nariaki; Osaki, Takashi*; Kato, Hideki*; Izawa, Shoichi*; Muto, Takenori*; Gizatulin, S.*; Shaimerdenov, A.*; Dyussambayev, D.*; et al.
Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.567 - 571, 2016/11
Graphite are used for the in-core components of HTGR, and it is desirable to enhance oxidation resistance to keep much safety margin. SiC coating is the candidate method for this purpose. JAEA and four Japanese graphite companies are studying to develop oxidation-resistant graphite. Neutron irradiation test was carried out by WWR-K reactor of INP of Kazakhstan through ISTC partner project. The total irradiation cycles of WWR-K operation was 10 cycles by 200 days. Irradiation temperature about 1473 K would be attained. The maximum fast neutron fluence (E 
0.18 MeV) for the capsule irradiated at a central irradiation hole was preliminary calculated as 1.2
10
/m
, and for the capsule at a peripheral irradiation hole as 4.210
/m. Dimension and weight of the irradiated specimens were measured, and outer surface of the specimens were observed by optical microscope. For the irradiated oxidation resistant graphite, out-of-pile oxidation test will be carried out at an experimental laboratory.
Pirozhkov, A. S.; Kando, Masaki; Esirkepov, T. Z.; Faenov, A. Y.*; Pikuz, T. A.*; Kawachi, Tetsuya; Sagisaka, Akito; Koga, J. K.; Mori, Michiaki; Kawase, Keigo*; et al.
RAL-TR-2015-025, P. 22, 2015/00
in comparison to UO and PuONelson, A. T.*; Rittman, D. R.*; White, J. T.*; Dunwoody, J. T.*; Kato, Masato; McClellan, K. J.*
Journal of the American Ceramic Society, 97(11), p.3652 - 3659, 2014/11
Times Cited Count：60 Percentile：93.68(Materials Science, Ceramics)Sumita, Junya; Shibata, Taiju; Sakaba, Nariaki; Osaki, Hiroki*; Kato, Hideki*; Fujitsuka, Kunihiro*; Muto, Takenori*; Gizatulin, S.*; Shaimerdenov, A.*; Dyussambayev, D.*; et al.
Proceedings of 7th International Topical Meeting on High Temperature Reactor Technology (HTR 2014) (USB Flash Drive), 7 Pages, 2014/10
Graphite materials are used for the in-core components of High Temperature Gas-cooled Reactor(HTGR)which is a graphite-moderated and helium gas-cooled reactor. In the case of air ingress accident in HTGR, SiO protective layer is formed on the surface of SiC layer in TRISO CFP and oxidation of SiC does not proceed and fission products are retained inside the fuel particle. A new safety concept for the HTGR, called Naturally Safe HTGR, has been recently proposed. To enhance the safety of Naturally Safe HTGR ultimately, it is expected that oxidation-resistant graphite is used for graphite components to prevent the TRISO CFPs and fuel compacts from failure. SiC coating is one of candidate methods for oxidation-resistant graphite. JAEA and four graphite companies launched R&Ds to develop the oxidation-resistant graphite and the International Science and Technology Center(ISTC) partner project with JAEA and INP was launched to investigate the irradiation effects on the oxidation-resistant graphite. To determine grades of the oxidation-resistant graphite which will be adopted as irradiation test, a preliminary oxidation test was carried out. This paper described the results of the preliminary oxidation test, the plan of out-of-pile test, irradiation test and post-irradiation test(PIE)of the oxidation-resistant graphite.
