Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Cao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; Kato, Kenichi*; Hattori, Takanori; et al.
Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04
Times Cited Count:0 Percentile:0(Chemistry, Physical)Hydrostatic and chemical pressure are efficient stimuli to alter the crystal structure and are commonly used for tuning electronic and magnetic properties in materials science. However, chemical pressure is difficult to quantify and a clear correspondence between these two types of pressure is still lacking. Here, we study intermetallic candidates for a permanent magnet with a negative thermal expansion (NTE). Based on in situ synchrotron X-ray diffraction, negative chemical pressure is revealed in HoFe on Al doping and quantitatively evaluated by using temperature and pressure dependence of unit cell volume. A combination of magnetization and neutron diffraction measurements also allowed one to compare the effect of chemical pressure on magnetic ordering with that of hydrostatic pressure. Intriguingly, pressure can be used to control suppression and enhancement of NTE. Electronic structure calculations indicate that pressure affected the top of the majority band with respect to the Fermi level, which has implications for the magnetic stability, which in turn plays a critical role in modulating magnetism and NTE. This work presents a good example of understanding the effect of pressure and utilizing it to control properties of functional materials.
Wei, D.*; Gong, W.; Tsuru, Tomohito; Kawasaki, Takuro; Harjo, S.; Cai, B.*; Liaw, P. K.*; Kato, Hidemi*
International Journal of Plasticity, 158, p.103417_1 - 103417_17, 2022/11
Times Cited Count:13 Percentile:97.88(Engineering, Mechanical)Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count:3 Percentile:80.29(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Kaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*
Nuclear Instruments and Methods in Physics Research A, 1010, p.165544_1 - 165544_9, 2021/09
Times Cited Count:0 Percentile:0.02(Instruments & Instrumentation)The number of nuclear facilities being decommissioned has been increasing worldwide, in particular following the accident of the Tokyo Electric Power Company Holdings' Fukushima Daiichi Nuclear Power Station in 2011. In these nuclear facilities, proper management of radioactive materials is required. Then, A -ray spectrometer with four segmentations using small volume CeBr scintillators with a dimension of was developed. The four scintillators were coupled to a multi-anode photomultiplier tube specific to intense radiation fields. We performed the -ray exposure study under Cs and Co radiation fields. Under the Cs radiation field, the relative energy resolution at 1375 mSv/h was the relative energy resolution at 1375 mSv/h was 9.20.05%, 8.00.08%, 8.00.03%, and 9.00.04% for the four channels, respectively.
Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I. H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.
Physical Review Letters, 127(5), p.053001_1 - 053001_7, 2021/07
Times Cited Count:9 Percentile:78.48(Physics, Multidisciplinary)We observed electronic X rays emitted from muonic iron atoms using a superconducting transition-edge-type sensor microcalorimeter. The energy resolution of 5.2 eV in FWHM allowed us to observe the asymmetric broad profile of the electronic characteristic and X rays together with the hypersatellite X rays around 6 keV. This signature reflects the time-dependent screening of the nuclear charge by the negative muon and the -shell electrons, accompanied by electron side-feeding. Assisted by a simulation, this data clearly reveals the electronic - and -shell hole production and their temporal evolution during the muon cascade process.
Kim, B. K.*; Tan, L.*; Sakasegawa, Hideo; Parish, C. M.*; Zhong, W.*; Tanigawa, Hiroyasu*; Kato, Yutai*
Journal of Nuclear Materials, 545, p.152634_1 - 152634_12, 2021/03
Times Cited Count:1 Percentile:16.97(Materials Science, Multidisciplinary)Kaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 988, p.164900_1 - 164900_8, 2021/02
Times Cited Count:9 Percentile:90.18(Instruments & Instrumentation)An increasing number of nuclear facilities have been decommissioned worldwide following the 2011 accident of the TEPCO' Fukushima Daiichi Nuclear Power Station. During the decommissioning, radioactive materials have to be retrieved under proper management. In this study, a small cubic CeBr spectrometer with dimensions of 5 mm 5 mm 5 mm was manufactured to perform -ray spectroscopy under intense -ray fields. Furthermore, thanks to a fast digital process unit and a customized photomultiplier, the device could perform -ray spectroscopy at dose rates of over 1 Sv/h. The energy resolution (FWHM) at 662 keV ranged from 4.4% at 22 mSv/h to 5.2% at 1407 mSv/h for a Cs radiation field. Correspondingly, at 1333 keV, it ranged from 3.1% at 26 mSv/h to 4.2% at 2221 mSv/h for a Co radiation field, which suggested to realize -ray assessment of Cs, Cs, Co, and Eu at dose rates of over 1 Sv/h.
Nakamichi, Shinya; Hirooka, Shun; Kato, Masato; Sunaoshi, Takeo*; Nelson, A. T.*; McClellan, K. J.*
Journal of Nuclear Materials, 535, p.152188_1 - 152188_8, 2020/07
Times Cited Count:7 Percentile:72.51(Materials Science, Multidisciplinary)Oxygen-to-metal ratio (O/M) of uranium and plutonium mixed oxide depends on its oxygen partial pressure. To attain the desirable microstructure and O/M ratio of sintered pellets, it is important to investigate the relation between the sintering behavior and the atmosphere of sintering process. In this study, sintering behavior of (PuU)O and (PuU)O in controlled po atmosphere were investigated. It was found activation energy of (PuU)O was higher than that of (PuU)O. On the other hand, it was observed grain growth during sintering was suppressed in hypo-stoichiometric composition.
Cappia, F.*; Tanaka, Kosuke; Kato, Masato; McClellan, K.*; Harp, J.*
Journal of Nuclear Materials, 533, p.152076_1 - 152076_14, 2020/05
Times Cited Count:6 Percentile:61.45(Materials Science, Multidisciplinary)Suzuki, Kiichi; Kato, Masato; Sunaoshi, Takeo*; Uno, Hiroki*; Carvajal-Nunez, U.*; Nelson, A. T.*; McClellan, K. J.*
Journal of the American Ceramic Society, 102(4), p.1994 - 2008, 2019/04
Times Cited Count:30 Percentile:90.26(Materials Science, Ceramics)The fundamental properties of CeO were assessed using a range of experimental techniques. The oxygen potential of CeO was measured by the thermogravimetric technique, and a numerical fit for the oxygen potential of CeO is derived based on defect chemistry. Mechanical properties of CeO were obtained using sound velocity measurement, resonant ultrasound spectroscopy and nanoindentation. The obtained mechanical properties of CeO are then used to evaluate the Debye temperature and Gruneisen constant. The heat capacity and thermal conductivity of CeO were also calculated using the Debye temperature and the Gruneisen constant. Finally, the thermal conductivity was calculated based upon laser flash analysis measurements. This result demonstrates that the thermal conductivity has strong dependence upon material purity.
Kishi, Hirofumi*; Sakamoto, Tomokazu*; Asazawa, Koichiro*; Yamaguchi, Susumu*; Kato, Takeshi*; Zulevi, B.*; Serov, A.*; Artyushkova, K.*; Atanassov, P.*; Matsumura, Daiju; et al.
Nanomaterials (Internet), 8(12), p.965_1 - 965_13, 2018/12
Times Cited Count:10 Percentile:49.61(Chemistry, Multidisciplinary)Yoshimoto, Masahiro; Saha, P. K.; Kato, Shinichi; Okabe, Kota; Yamamoto, Kazami; Kinsho, Michikazu
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.1048 - 1050, 2018/06
The charge exchange multi-turn beam injection scheme is adopted in the J-PARC 3GeV Rapid Cycling Synchrotron Accelerator (RCS) due to achieve 1MW beam power operation. In the conventional multi-turn beam injection scheme, which is provided by only the septum and bump magnets, injecting turn numbers are limited by the beam losses at the septum. On the other hand, charge exchange multi-turn beam injection does not cause the beam losses at the septum; there is no restriction in principle on the injecting turn number. However, high residual doses are observed around the stripper foil. During the charge exchange multi-turn beam injection, not only the injecting beam but also circulating beam hit the foil, and then a large number of secondary particles, namely protons and neutrons, are generated. PHITS simulation results indicate that the secondary particles cause the high residual doses around the foil. To verify this examination, secondary particles measurement is key issue. Then, a new independent type foil introducing device is installed in the 100-deg dump beam transport line in order to construct a simple experimental system for secondary particle measurements. We plan the two experiments by using this system; one is a directly secondary particle detecting method, and the other is a radioactivation analysis method with metal sample pieces. Now, we started the study of how the identification of species and energies of the secondary particles with PHITS code. Irradiation target of Cu is adopted and irradiated proton or neutron beam with various energy range. Then radio-nuclides emitted the -ray are picked up. Moreover, the radio-nuclides, whose reaction efficiencies due to beam species or energy are different, are searched for the indicator of the secondary particles. From the simulation results, Zn is extremely suitable for a proton beam indicator, and Co and Co are also suited for a neutron and proton indicator respectively.
Harada, Hiroyuki; Yamane, Isao*; Saha, P. K.; Suganuma, Kazuaki; Kinsho, Michikazu; Irie, Yoshiro*; Kato, Shinichi
Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.684 - 688, 2017/12
The high-intensity proton accelerator adopts a charge exchange injection scheme, which injects with exchanging from negative Hydrogen ion to proton by using carbon foil. This scheme can realize high intensity proton beam but the uncontrolled beam losses are caused by scattering between beams and the foil. Additionally, the collision may occur the foil beak. Therefore, a new injection scheme for higher intensity is needed as an alternative to the foil. In the J-PARC 3GeV RCS, we newly propose and develop a laser stripping injection scheme. However, it is necessary that laser power is two order higher than latest laser one. To realize this big issue, we develop the laser storage ring, which can provide laser pulse of high repetition rate by recycling one. In this presentation, we will introduce the laser stripping injection scheme and describe the concept of the laser storage ring with high repetition rate and report the current status.
Hotchi, Hideaki; Harada, Hiroyuki; Kato, Shinichi; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; Watanabe, Yasuhiro; Yoshimoto, Masahiro
Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.95 - 99, 2017/12
no abstracts in English
Saha, P. K.; Harada, Hiroyuki; Yamane, Isao*; Kinsho, Michikazu; Miura, Akihiko; Okabe, Kota; Liu, Y.*; Yoshimoto, Masahiro; Kato, Shinichi; Irie, Yoshiro*
Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.866 - 870, 2017/12
Miyabe, Masabumi; Oba, Masaki; Jung, K.; Iimura, Hideki; Akaoka, Katsuaki; Kato, Masaaki; Otobe, Haruyoshi; Khumaeni, A.*; Wakaida, Ikuo
Spectrochimica Acta, Part B, 134, p.42 - 51, 2017/08
Times Cited Count:28 Percentile:91.14(Spectroscopy)Spectroscopic properties of atomic species of plutonium were investigated by combining laser ablation and resonance absorption techniques for the analysis of a plutonium oxide sample. For 17 transitions of Pu atoms and ions, the absorbance, isotope shift, and hyperfine splitting were determined via Voigt profile fitting of the recorded absorption spectra. Three transitions were selected as candidates for analytical use. Using these transitions, we investigated the analytical performance that was attainable and determined a correlation coefficient R2 between the absorbance and plutonium concentration of 0.9999, a limit of detection of 30-130 ppm, and a relative standard deviation of approximately 6% for an abundance of Pu of 2.4%. These results demonstrate that laser ablation absorption spectroscopy is applicable to the remote isotopic analysis of highly radioactive nuclear fuels and waste materials containing multiple actinide elements.
Hotchi, Hideaki; Harada, Hiroyuki; Hayashi, Naoki; Kato, Shinichi; Kinsho, Michikazu; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; et al.
Physical Review Accelerators and Beams (Internet), 20(6), p.060402_1 - 060402_25, 2017/06
Times Cited Count:24 Percentile:88.27(Physics, Nuclear)The 3-GeV rapid cycling synchrotron (RCS) of the Japan Proton Accelerator Research Complex (J-PARC) is the world's highest class of high-power pulsed proton driver, aiming for an output beam power of 1 MW. The most important issues in realizing such a high-power beam operation are to control and minimize beam loss for maintaining machine activations within permissible levels. In RCS, numerical simulation was successfully utilized along with experimental approaches to isolate the mechanism of beam loss and find its solution. By iteratively performing actual beam experiments and numerical simulations, and also by several hardware improvements, we have recently established a 1-MW beam operation with very low fractional beam loss of a couple of 10. In this paper, our recent efforts toward realizing such a low-loss high-intensity beam acceleration are presented.
Hotchi, Hideaki; Harada, Hiroyuki; Kato, Shinichi; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; Watanabe, Yasuhiro; Yoshimoto, Masahiro
Proceedings of 8th International Particle Accelerator Conference (IPAC '17) (Internet), p.2470 - 2473, 2017/06
For this past year, RCS beam tuning was focused on realizing a high-intensity low-emittance beam required from the downstream facility. The extraction beam emittance including its tail part was successfully decreased by optimizing transverse injection painting, and tune and chromaticity manipulations, where bipolar sextupole field patterns were newly introduced to simultaneously achieve emittance growth mitigation at the early stage of acceleration and beam instability suppression after the middle stage of acceleration. This paper presents the recent experimental results, together with detailed discussions for the emittance growth and its mitigation mechanisms.
Harada, Hiroyuki; Saha, P. K.; Yamane, Isao*; Kato, Shinichi; Kinsho, Michikazu; Irie, Yoshiro*
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.983 - 986, 2016/11
The high-intensity proton accelerator adopts a charge exchange injection scheme, which injects with exchanging from negative Hydrogen ion to proton by using carbon foil. This scheme can realize high intensity proton beam but the uncontrolled beam losses are caused by scattering between beams and the foil. Additionally, the collision may occur the foil beak. Therefore, a new injection scheme for higher intensity is needed as an alternative to the foil. In the J-PARC 3GeV RCS, we newly propose and develop a laser stripping injection scheme However, it is necessary that laser power is two order higher than latest laser one. To realize this big issue, we develop the laser storage ring, which can provide laser pulse of high repetition rate by recycling one. In this presentation, we will introduce the laser stripping injection scheme and describe the concept of the laser storage ring with high repetition rate.
Hotchi, Hideaki; Harada, Hiroyuki; Kato, Shinichi; Kinsho, Michikazu; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; Watanabe, Yasuhiro; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.61 - 65, 2016/11
After the RF power supply upgrade, the J-PARC 3-GeV RCS restarted a 1-MW beam test in October 2015. In the beam test in October, we successfully removed longitudinal beam loss by beam loading compensation as well as minimized space-charge induced beam loss by injection painting. In addition, in this beam test, beam instability was also well suppressed by controlling the tune and the chromaticity. Furthermore, in the following beam test, the transverse painting area was successfully expanded by introducing both quadrupole correctors and anti-correlated painting scheme, by which a foil scattering part of beam loss during charge-exchange injection was further reduced. By these recent efforts, the 1-MW beam operation is now estimated to be established within a permissible beam loss level. This paper presents recent progresses of 1-MW beam tuning with particular emphasis on our approaches to beam loss issues.