Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kamiya, Tomohiro; Ono, Ayako; Tada, Kenichi; Akie, Hiroshi; Nagaya, Yasunobu; Yoshida, Hiroyuki; Kawanishi, Tomohiro
Proceedings of 29th International Conference on Nuclear Engineering (ICONE 29) (Internet), 8 Pages, 2022/11
JAEA started to develop the advanced reactor analysis code JAMPAN (JAEA advanced multi-physics analysis platform for nuclear systems). The current version of JAMPAN handles the continuous energy Monte Carlo code MVP and the detailed thermal-hydraulics analysis code for multiphase and multicomponent JUPITER. JAMPAN is designed to consider the extensibility and it does not depend on the analysis codes. All calculations in JAMAPAN are not directly connected. JAMPAN has data containers, and all input and output data of each analysis code are set in these data containers. JAMPAN will easily exchange the calculation codes and add the other calculations, e.g., structure calculation and irradiation calculation since the input and the output format of each code has no impact on the other calculation codes. The 4 by 4 pin-cell geometry was used as the demonstration calculation of JAMPAN and the physically reasonable calculation results were obtained.
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kurata, Masaki; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Sato, Daiki*; Murakami, Nozomu*; et al.
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.206 - 216, 2019/09
After the nuclear accident at Fukushima Daiichi Power Plant, research and development (R&D) program for establishing technical basis of accident-tolerant fuel (ATF) started from 2015 in Japan. Since then, both experimental and analytical studies necessary for designing a new light water reactor (LWR) core with ATF candidate materials are being conducted within the Japanese ATF R&D Consortium for implementing ATF to the existing LWRs, accompanying with various technological developments required. Until now, we have accumulated experimental data of the candidate materials by out-of-pile tests, developed fuel evaluation codes to apply to the ATF candidate materials, and evaluated fuel behavior simulating operational and accidental conditions by the developed codes. In this paper, the R&D progresses of the ATF candidate materials considered in Japan are reviewed based on the information available such as proceedings of international conference and academic papers, providing an overview of ATF program in Japan.
C and 
O nuclei by low-energy proton beamsAkagi, Takashi*; Yagi, Masashi*; Yamashita, Tomohiro*; Murakami, Masao*; Yamakawa, Yoshiyuki*; Kitamura, Keiji*; Ogura, Koichi; Kondo, Kiminori; Kawanishi, Shunichi*
Radiation Measurements, 59, p.262 - 269, 2013/12
Times Cited Count：16 Percentile：76.68(Nuclear Science & Technology)In proton therapy, positron emitters are induced from C andO nuclei by protons on the beam path in the patient. Many studies for monitoring positron emitters with beam-induced PET technique have been performed by various groups to verify the proton beam range and the dose in the patient for quality assurance. The aim of this study was to develop a method for measuring the production cross sections of positron emitters using standard equipment for proton therapy. The time-activity curve was then obtained with a high-sensitivity PET scanner to extract the number of positron emitters produced in the target. The production cross sections for four reaction channels: O(p,pn)
O, O(p,3p3n)
C, O(p,2p2n)
N, and C(p,pn)C were then measured. The cross sections for the O(p,pn)O reaction channel were consistent with data of previous experiments within the uncertainties, while those of C(p,pn)C were generally lower than data of previous experiments.
Yamashita, Shinichiro; Nemoto, Yoshiyuki; Ioka, Ikuo; Kawanishi, Tomohiro; Kurata, Masaki; Kaji, Yoshiyuki; Fukahori, Tokio
no journal, ,
After the 2011 Great East Japan Earthquake and Tsunami, and the events that followed at the Fukushima Daiichi Nuclear Power Station (1F), global interest has expanded in exploring fuels with enhanced performance during such rare events, with accident-tolerant fuel (ATF) development programs starting in many countries. In Japan, several ATF programs have been launched for feasibility study, development of manufacturing technology, and establishment of technical basis since the 1F accident. ATF candidate materials considered in Japan are silicon carbide (SiC) composite and FeCrAl steel strengthened by dispersion of fine oxide particles (FeCrAl-ODS). SiC composite is very attractive material because of its lower hydrogen generation rate and lower reaction heat in comparison with conventional Zirconium (Zr) alloys. Therefore, practical uses for a fuel cladding of pressurized water reactor (PWR) and for the fuel cladding, channel box of boiling water reactor (BWR) are expected. On the other hand, FeCrAl-ODS steel is a promising material and is considered to apply to the fuel cladding of BWR.
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Watanabe, Seiichi*; Murakami, Nozomu*; Sato, Hisaki*; et al.
no journal, ,
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Watanabe, Seiichi*; Murakami, Nozomu*; Sato, Hisaki*; et al.
no journal, ,
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kurata, Masaki; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Sato, Daiki*; Murakami, Nozomu*; et al.
no journal, ,
Research and development (R&D) program for establishing technical basis of ATFs for light water reactor (LWR) started in 2015. Since then the R&D is being conducted in cooperation with power plant providers, fuel venders, research institutes and universities for making the most use of the experiences in R&D, practical design, and evaluations of fuels and cores of commercial LWRs. Among currently explored ATF candidate materials in the program, silicon carbide composite reinforced by SiC fiber (SiC/SiC) and FeCrAl steel strengthened by dispersion of fine oxide particles (FeCrAl-ODS) offer several attractive features including the remarkable high temperature capabilities and the slow kinetics of steam oxidation reactions. This presentation will give an overview of the progress in ATF development and review the current status of data availability and integrity for the properties and behaviors of ATF candidate materials, followed by discussion on the primary differences from zirconium alloy in the behaviors in the severe accident scenarios. Finally, subjects to be solved for practical use of ATF will be summarized.
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kurata, Masaki; Kawanishi, Tomohiro; Kaji, Yoshiyuki; Fukahori, Tokio; Watanabe, Seiichi*; Murakami, Nozomu*; Sato, Hisaki*; et al.
no journal, ,
In Japan, research and development (R&D) program for establishing technical basis of ATF started in 2015 and is being conducted in cooperation with power plant providers, fuel venders and universities for making the most use of the experiences in R&D, practical design, and evaluations of fuels and cores of commercial LWRs. The present paper reviews the progress of the development and summarizes subjects to be solved for ATF cladding, based on the attribute guide which was originally drawn up in the Japanese ATF R&D program as it should be an indicator of proper ATF development guidance.
Kawanishi, Tomohiro; Nagaya, Yasunobu; Yoshida, Hiroyuki; Akie, Hiroshi; Tada, Kenichi; Ono, Ayako
no journal, ,
JAEA has started to develop the advanced neutronics/thermal-hydraulics coupling simulation system for improvement of the light water reactor analysis and safety. This simulation system uses a continuous energy Monte Carlo calculation code MVP and CFD calculation code TPFIT and JUPITER. The advanced system can treat rigorous bubble shape and it does not adopt the approximate expression and empirical formula. The advanced system will be a reference system for the current neutronics/thermal-hydraulics coupling simulation system. In this presentation, we show the outline of the advanced system.
Tada, Kenichi; Akie, Hiroshi; Ono, Ayako; Nagaya, Yasunobu; Yoshida, Hiroyuki; Kawanishi, Tomohiro
no journal, ,
JAEA has started to develop the advanced neutronics/thermal-hydraulics coupling simulation system for improvement of the light water reactor analysis and safety. We developed a prototype simulation system to find the issues of coupling simulation and to investigate the optimum mesh size for neutronics and thermal-hydraulics analysis. This presentation explains the overview of the prototype simulation system and its calculations results.
Akie, Hiroshi; Tada, Kenichi; Ono, Ayako; Nagaya, Yasunobu; Yoshida, Hiroyuki; Kawanishi, Tomohiro
no journal, ,
Japan Atomic Energy Agency is developing an advanced neutronics/thermal-hydraulics coupling simulation system for the design advancement and the safety improvement of light water reactors. In this presentation, an impact of the fine-scale void distribution in sub-channels on neutronics calculations is studied.
Tada, Kenichi; Akie, Hiroshi; Kamiya, Tomohiro; Ono, Ayako; Nagaya, Yasunobu; Yoshida, Hiroyuki; Kawanishi, Tomohiro
no journal, ,
JAEA is developing the advanced neutronics/thermal-hydraulics coupling simulation system to improve the design and safety analysis of light water reactors. This presentation explains the coupling simulation system using a continuous energy Monte Carlo code MVP and a subchannel analysis code NASCA.
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Osaka, Masahiko; Kaji, Yoshiyuki
no journal, ,
After the nuclear accident at Fukushima Daiichi power plant, global interest has expanded in exploring fuels with enhanced performance during severe accident, and enhancing the accident tolerance of light water reactors (LWRs) became a topic of serious discussion all over the world. In Japan, research and development (R&D) program for establishing technical basis of ATF has been conducted by JAEA in cooperation with power plant providers, fuel venders and universities. In this presentation, the overview of ATF R&D program in Japan will be introduced with the explanation on JAEA's role in ATF R&D program.
Kaji, Yoshiyuki; Yamashita, Shinichiro; Nemoto, Yoshiyuki; Ioka, Ikuo; Osaka, Masahiko; Kawanishi, Tomohiro
no journal, ,
The JAIF International Cooperation Center will hold a local seminar in the Czech Republic as part of its efforts to promote cooperation through local seminars and invitations from Japan to countries that are promoting the expansion of nuclear power plants. In this seminar, we will introduce the current status of accident-resistant fuel development in Japan.
Yamashita, Shinichiro; Mohamad, A. B.; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Osaka, Masahiko; Kaji, Yoshiyuki
no journal, ,
After the nuclear accident at Fukushima Daiichi power plant, global interest has expanded in exploring fuels with enhanced performance during severe accident, and enhancing the accident tolerance of light water reactors (LWRs) became a topic of serious discussion all over the world. In Japan, research and development (R&D) program for establishing technical basis of ATF has been conducted by JAEA in cooperation with power plant providers, fuel venders and universities. In this presentation, the overview of ATF R&D program in Japan will be introduced with the explanation on JAEA's role in ATF R&D program including the recent result from fundamental ATF studies.
Yamashita, Shinichiro; Nemoto, Yoshiyuki; Ioka, Ikuo; Osaka, Masahiko; Kawanishi, Tomohiro; Kaji, Yoshiyuki
no journal, ,
After the nuclear accident at Fukushima Daiichi power plant, global interest has expanded in exploring fuels with enhanced performance during severe accident, and enhancing the accident tolerance of light water reactors (LWRs) became a topic of serious discussion all over the world. In Japan, research and development (R&D) program for establishing technical basis of ATF has been conducted by JAEA in cooperation with power plant providers, fuel venders and universities. In this presentation, the overview of ATF R&D program in Japan will be introduced with the explanation on development status of each ATF elemental technology as well as JAEA's role in ATF R&D program.
Yamashita, Shinichiro; Nemoto, Yoshiyuki; Ioka, Ikuo; Osaka, Masahiko; Kawanishi, Tomohiro; Kaji, Yoshiyuki
no journal, ,
After the nuclear accident at Fukushima Daiichi power plant, global interest has expanded in exploring fuels with enhanced performance during severe accident, and enhancing the accident tolerance of light water reactors (LWRs) became a topic of serious discussion all over the world. In this panel session, the state-of-art knowledge and the latest development status of ATF from the point of view of industry, government, nonprofit research agencies, and academic representatives currently leading global ATF development will be presented and discussed. The significant challenges in development and implementation of ATF, such as large scale ATF fabrication, acceptance by nuclear utilities, the role of government and inter-government agencies in ATF research oversight, and the engineering and scientific challenges to develop ATF will be presented.
Yamashita, Shinichiro; Mohamad, A. B.; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kaji, Yoshiyuki; Osaka, Masahiko; Murakami, Nozomu*; Owaki, Masao*; Sasaki, Masana*; et al.
no journal, ,
Japan's Accident Tolerant Fuel (ATF) research and development (R&D) program has been conducted since 2015 in cooperation with power plant providers, fuel venders and universities for making the most use of the experiences in R&D, practical design, and evaluations of fuels and cores of commercial Light Water Reactors (LWRs). An overview of the present R&D progress is given, in relation to the role of Japan Atomic Energy Agency (JAEA) in the program. The ATF candidate materials currently under consideration are the following three claddings: the silicon carbide (SiC) composite which is potentially applicable for Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR), the FeCrAl steel strengthened by dispersion of fine oxide particles (FeCrAl-ODS) for BWR, and Cr-coated zircalloy claddings for PWR. In addition to the cladding materials, R&D on the SiC-made BWR channel box and accident tolerant control rods are also underway.
