Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.
Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12
Times Cited Count：6 Percentile：51.19(Geosciences, Multidisciplinary)The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.
Morishita, Yuki; Torii, Tatsuo; Usami, Hiroshi; Kikuchi, Hiroyuki*; Utsugi, Wataru*; Takahira, Shiro*
Scientific Reports (Internet), 9, p.581_1 - 581_14, 2019/01
Times Cited Count：20 Percentile：91.8(Multidisciplinary Sciences)Sato, Yuki; Tanifuji, Yuta; Terasaka, Yuta; Usami, Hiroshi; Kaburagi, Masaaki; Kawabata, Kuniaki; Utsugi, Wataru*; Kikuchi, Hiroyuki*; Takahira, Shiro*; Torii, Tatsuo
Journal of Nuclear Science and Technology, 55(9), p.965 - 970, 2018/09
Times Cited Count：33 Percentile：96.7(Nuclear Science & Technology)Suekuni, Koichiro*; Lee, C. H.*; Tanaka, Hiromi*; Nishibori, Eiji*; Nakamura, Atsushi*; Kasai, Hidetaka*; Mori, Hitoshi*; Usui, Hidetomo*; Ochi, Masayuki*; Hasegawa, Takumi*; et al.
Advanced Materials, 30(13), p.1706230_1 - 1706230_6, 2018/03
Times Cited Count：51 Percentile：89.35(Chemistry, Multidisciplinary)Thermoelectric materials for highly efficient devices must satisfy conflicting requirements of high electrical conductivity and low thermal conductivity. In this paper, we studied the crystal structure and phonon dynamics of tetrahedrites (Cu,Zn)
(Sb,As)
S
. The results revealed that the Cu atoms in a planar coordination are rattling, which effectively scatter phonons. These findings provide a new strategy for the development of highly efficient thermoelectric materials with planar coordination.
Kawase, Keiichi; Kitano, Mitsuaki; Watanabe, Masanori; Yoshimura, Shuichi; Kikuchi, Shiro; Nishino, Katsumi*
JAEA-Review 2017-006, 173 Pages, 2017/03
JAEA-Review-2017-006.pdf:35.6MB
JAEA-Review-2017-006-appendix(CD-ROM).zip:0.52MB
Survey of a transition of the air and surface dose rate was conducted for the area where the Cabinet Office decontamination model demonstration project was implemented. The area includes 15 districts in 9 municipalities identified by the Ministry of the Environment. We investigated 11 times from October, 2012 to October, 2015. Measurement of the air dose rate in this study was carried out in two methods using the fixed-point measurement and gamma plotter H using a NaI scintillation survey meter etc. As fixed-point measurement, set measurement point in the first survey for (fixed point), it was subjected to measurement of the surface dose rate to continue (1cm height) and space dose rate (1m height). In addition surface specific dose rate distribution measurement using a gamma plotter H (5cm and 1m height) was also performed together. As a result of the fixed-point measurement and gamma plotter H surface measurements, space dose rate from the first survey to the 11th survey shows the downward trend. We consider that there is no movement of radioactive pollutants from outside decontamination model project area into decontamination model project area.
Matsuo, Tatsuhito; Arata, Toshiaki*; Oda, Toshiro*; Nakajima, Kenji; Kawamura, Seiko; Kikuchi, Tatsuya; Fujiwara, Satoru
Biochemistry and Biophysics Reports (Internet), 6, p.220 - 225, 2016/07
Matsuo, Tatsuhito; Arata, Toshiaki*; Oda, Toshiro*; Nakajima, Kenji; Kawamura, Seiko; Kikuchi, Tatsuya; Fujiwara, Satoru
Biochemical and Biophysical Research Communications, 459(3), p.493 - 497, 2015/04
Times Cited Count：4 Percentile：12.91(Biochemistry & Molecular Biology)Oguri, Hidetomo; Hasegawa, Kazuo; Ito, Takashi; Chishiro, Etsuji; Hirano, Koichiro; Morishita, Takatoshi; Shinozaki, Shinichi; Ao, Hiroyuki; Okoshi, Kiyonori; Kondo, Yasuhiro; et al.
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.389 - 393, 2014/10
no abstracts in English
Asano, Shiro*; Okuyama, Toshihisa*; Onawa, Toshio*; Yanagi, Yutaka*; Ejiri, Mitsuru*; Kanahara, Toshio*; Ichihashi, Koji*; Kikuchi, Atsushi*; Mizumaki, Shoichi*; Masaki, Kei; et al.
Fusion Engineering and Design, 86(9-11), p.1816 - 1820, 2011/10
Times Cited Count：12 Percentile：66.82(Nuclear Science & Technology)The real vacuum vessel (VV) manufacturing of JT-60SA has started since Nov. 2009 at Toshiba. Prior to starting manufacturing, fundamental welding R&Ds had been performed by three stages. In the first stage, primary tests for screening welding method were performed. In the second stage, the trial welding for 1m-long straight and curved double shell samples were conducted. The dependences of welding quality and distortion on the welding conditions, such as arc voltage and current, setting accuracy, welding sequence, the shape of grooves, etc. were measured. In addition, welding condition with low heat input was explored. In the last stage, fabrication sequence was confirmed and established by the trial manufacturing of the 20
upper half mock-up. This poster presents the R&D results obtained in the first and second stages.
Homma, Shunji*; Ishii, Junichi; Kikuchi, Toshiaki*; Chikazawa, Takahiro*; Shibata, Atsuhiro; Koyama, Tomozo; Koga, Jiro*; Matsumoto, Shiro*
Journal of Nuclear Science and Technology, 45(6), p.510 - 517, 2008/06
Times Cited Count：11 Percentile：59.16(Nuclear Science & Technology)U-Pu co-crystallization reprocessing system is proposed for LWR fuels and its flowsheet study is carried out. This reprocessing system is based on the experimental evidence indicating that hexavalent plutonium is co-crystallized with uranyl nitrate. The system consists of five steps: dissolution of spent fuel, Pu oxidation, U-Pu co-crystallization, dissolution of the crystals, and U crystallization. The system does not require organic solvent, expecting the enhancement of safety and cost-effectiveness. The system requires a recycling of the mother liquor from the U-Pu co-crystallization step to recover almost entire amount of U and Pu. The appropriate recycle ratio is determined for LWR fuels, such that the satisfactory decontamination is achieved. The mother liquor from the U re-crystallization step contains U and Pu. The flowsheet study shows that the constant ratio of Pu to U in the mother liquor can be controlled even though the composition of the spent fuel is different.
Tsuzuki, Kazuhiro; Kamiya, Kensaku; Shinohara, Koji; Bakhtiari, M.*; Ogawa, Hiroaki; Kurita, Genichi; Takechi, Manabu; Kasai, Satoshi; Sato, Masayasu; Kawashima, Hisato; et al.
Nuclear Fusion, 46(11), p.966 - 971, 2006/11
Times Cited Count：16 Percentile：48.35(Physics, Fluids & Plasmas)no abstracts in English
Tsuzuki, Kazuhiro; Shinohara, Koji; Kamiya, Kensaku; Kawashima, Hisato; Sato, Masayasu; Kurita, Genichi; Bakhtiari, M.; Ogawa, Hiroaki; Hoshino, Katsumichi; Kasai, Satoshi; et al.
Journal of Nuclear Materials, 329-333(1), p.721 - 725, 2004/08
Times Cited Count：7 Percentile：45.11(Materials Science, Multidisciplinary)no abstracts in English
Tsuzuki, Kazuhiro; Kimura, Haruyuki; Kawashima, Hisato; Sato, Masayasu; Kamiya, Kensaku; Shinohara, Koji; Ogawa, Hiroaki; Hoshino, Katsumichi; Bakhtiari, M.; Kasai, Satoshi; et al.
Nuclear Fusion, 43(10), p.1288 - 1293, 2003/10
Times Cited Count：39 Percentile：74.23(Physics, Fluids & Plasmas)no abstracts in English
Nakano, Junichi; Miwa, Yukio; Tsukada, Takashi; Kikuchi, Masahiko; Kita, Satoshi; Nemoto, Yoshiyuki; Tsuji, Hirokazu; Jitsukawa, Shiro
Journal of Nuclear Materials, 307-311(Part2), p.1568 - 1572, 2002/12
Times Cited Count：12 Percentile：60.82(Materials Science, Multidisciplinary)Type 316LN stainless steel of the international thermonuclear experimental reactor (ITER) Grade (316LN-IG SS) is being considered for the first wall/ blanket component. Hot isostatic pressing (HIP) technique is expected for the fabrication of module. To evaluate the integrity and susceptibility to stress corrosion cracking (SCC) of HIPed 316LN-IG SS, tensile tests in vacuum and slow strain rate tests (SSRT) in high temperature water were performed. Specimen with the HIPed joint shows no deterioration of the tensile strength and susceptibility to SCC in oxygenated water. Thermally sensitized specimen with the HIPed joint was low susceptible to SCC in creviced environment. It is concluded that the strength at joint location is as high as that at the base alloy and the joint interface appears integrity.
Wakai, Eiichi; Sawai, Tomotsugu; Furuya, Kazuyuki; Naito, Akira; Aruga, Takeo; Kikuchi, Kenji; Yamashita, Shinichiro*; Onuki, Somei*; Yamamoto, Shunya; Naramoto, Hiroshi; et al.
Journal of Nuclear Materials, 307-311(Part.1), p.278 - 282, 2002/12
Times Cited Count：51 Percentile：93.7(Materials Science, Multidisciplinary)no abstracts in English
Enoeda, Mikio; Ohara, Yoshihiro; Akiba, Masato; Sato, Satoshi; Hatano, Toshihisa; Kosaku, Yasuo; Kuroda, Toshimasa*; Kikuchi, Shigeto*; Yanagi, Yoshihiko*; Konishi, Satoshi; et al.
JAERI-Tech 2001-078, 120 Pages, 2001/12
This report is a summary of the design works, which was discussed in the design workshop held in 2000 for the demonstration (DEMO) blanket aimed to strengthen the commercial competitiveness and technical feasibility simultaneously. The DEMO blanket must supply the feasibility and experience of the total design of the power plant and the materials. This conceptual design study was performed to determine the updated strategy and goal of the R&D of the DEMO blanket which applies the supercritical water cooling proposed in A-SSTR, taking into account the recent progress of the plasma research and reactor engineering technology.
Nishio, Satoshi; Ushigusa, Kenkichi; Ueda, Shuzo; Polevoi, A.*; Kurita, Genichi; Tobita, Kenji; Kurihara, Ryoichi; Hu, G.; Okada, Hidetoshi*; Murakami, Yoshiki*; et al.
JAERI-Research 2000-029, 105 Pages, 2000/10
JAERI-Research-2000-029.pdf:4.19MB
no abstracts in English
; Mori, Masahiro; Kikuchi, Mitsuru; Ninomiya, Hiromasa; Jitsukawa, Shiro; Ito, Takao; Kuriyama, Masaaki;
16th IEEE/NPSS Symp. on Fusion Engineering (SOFE '95), p.1214 - 1217, 1995/06
no abstracts in English
Kikuchi, Teruo; Kurobane, Shiro; Ito, Tadaharu
Dekomisshoningu Giho, (5), p.60 - 66, 1992/06
no abstracts in English
Nakamura, Hiroo; Tsuji, Shunji; ; Ozeki, Takahisa; Ishida, Shinichi; Azumi, Masafumi; Akiba, Masato; Ando, Toshiro; Fujii, Tsuneyuki; Fukuda, Takeshi; et al.
Nuclear Fusion, 30(2), p.235 - 250, 1990/02
Times Cited Count：16 Percentile：53.11(Physics, Fluids & Plasmas)no abstracts in English
