Overview on recent progress toward small specimen test technique

Wakai, Eiichi; Kikuchi, Takayuki; Kim, B.*; Kimura, Akihiko*; Nogami, Shuhei*; Hasegawa, Akira*; Nishimura, Arata*; Soldaini, M.*; Yamamoto, Michiyoshi*; Knaster, J.*

Fusion Engineering and Design, 98-99, p.2089 - 2093, 2015/10

https://doi.org/10.1016/j.fusengdes.2015.06.068

Status of Japanese design and validation activities of test facilities in IFMIF/EVEDA

Wakai, Eiichi; Kikuchi, Takayuki; Kogawara, Takafumi; Kimura, Haruyuki; Yokomine, Takehiko*; Kimura, Akihiko*; Nogami, Shuhei*; Kurishita, Hiroaki*; Saito, Masahiro*; Nishimura, Arata*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 6 Pages, 2011/03

Japanese activities of test facilities in IFMIF-EVEDA (International Fusion Materials Irradiation Facility-Engineering Validation and Engineering Design Activities) project have three subjects of engineering design of post irradiation examination (PIE) facilities, small specimen test technique (SSTT), and engineering design of high flux test module (HFTM), and this paper is summarized about present status. Functional analysis and design of 2-D and 3-D models of PIE facility were performed. In HFTM, as materials of heater, W-3Re alloy and/or SiC/SiC composite were selected in the points of high temperature materials, fabrication technology and some suitable properties such as resistance of thermal shock, high temperature re-crystallization, ductility, resistance of irradiation degradation, and low-activation. In SSTT, a test machine of fracture toughness was designed and developed for small specimens with 10 mm square, and it had high accuracy controllability for stress and displacement.

Overview of the national centralized tokamak programme

Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.

Nuclear Fusion, 46(3), p.S29 - S38, 2006/03

https://doi.org/10.1088/0029-5515/46/3/S05

The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.

Design study of national centralized tokamak facility for the demonstration of steady state high- plasma operation

Tamai, Hiroshi; Akiba, Masato; Azechi, Hiroshi*; Fujita, Takaaki; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; Hosogane, Nobuyuki; Ichimura, Makoto*; et al.

Nuclear Fusion, 45(12), p.1676 - 1683, 2005/12

https://doi.org/10.1088/0029-5515/45/12/023

Design studies are shown on the National Centralized Tokamak facility. The machine design is carried out to investigate the capability for the flexibility in aspect ratio and shape controllability for the demonstration of the high-beta steady state operation with nation-wide collaboration, in parallel with ITER towards DEMO. Two designs are proposed and assessed with respect to the physics requirements such as confinement, stability, current drive, divertor, and energetic particle confinement. The operation range in the aspect ratio and the plasma shape is widely enhanced in consistent with the sufficient divertor pumping. Evaluations of the plasma performance towards the determination of machine design are presented.

Activity status of Japanese team of test facilities in IFMIF/EVEDA project

Wakai, Eiichi; Kogawara, Takafumi; Kikuchi, Takayuki; Yamamoto, Michiyoshi; Molla, J.*; Kimura, Akihiko*; Kasada, Ryuta*; Kim, B.*; Nogami, Shuhei*; Hasegawa, Akira*; et al.

no journal, , 

no abstracts in English