Noise countermeasures for inverter-controlled multi-stage roots vacuum pumps in J-PARC LINAC L3BT

Takano, Kazuhiro; Kotoku, Hirofumi*; Kobayashi, Fuminori*; Miyao, Tomoaki*; Moriya, Katsuhiro; Kamiya, Junichiro

JAEA-Technology 2021-017, 35 Pages, 2021/11

JAEA-Technology-2021-017.pdf:5.32MB

In J-PARC LINAC, the vacuum system of L3BT, which is a beam transport line connecting LINAC and 3GeV synchrotron, uses a turbo molecular pump and roots pump for rough exhaust and an ion pump for main exhaust. In addition, beam dumps are connected to the end of the L3BT at 0 degree, 30 degree, 90 degree, and 100 degree positions via vacuum partition windows. The roots pumps are used as the exhaust system for each beam dump. The roots pump controllers have been installed away from the pump in the accelerator tunnel to avoid radiation damages. Besides, the special controllers, which have no inverter circuit inside, have been used to reduce the electrical noise on the beam loss monitors nearby. However, using the special controller without inverters, several problems have occurred such as the instability or wide variability of the pumping speed. To solve such problems, the roots pump controller with the inverter circuit must be used after reducing the electrical noise. In this report, some countermeasures to reduce the electrical noise from the inverters were investigated. The noise reduction circuit was successfully optimized to the level where the beam loss monitors works unaffected.

Local structure investigations of accumulated damage in irradiated MgAlO

Yoshioka, Satoru*; Tsuruta, Konosuke*; Yamamoto, Tomokazu*; Yasuda, Kazuhiro*; Matsumura, Sho*; Sugiyama, Takeharu*; Oba, Yojiro; Ishikawa, Norito; Kobayashi, Eiichi*; Okudaira, Koji*

Journal of the American Ceramic Society, 103(8), p.4654 - 4663, 2020/08

https://doi.org/10.1111/jace.17101

X-ray absorption near edge structure (XANES) and small-angle X-ray scattering (SAXS) reveal the damaged structures in MgAlO spinel induced by swift heavy ions. SAXS indicates the formation of ion tracks with cylindrical shape with a diameter of 5 nm. XANES indicates the cationic disordering between tetrahedral and octahedral sites by the irradiation. Quantitative analysis of XANES also reveals that cations preferably occupy the octahedral sites at high fluence.

Evaluation of sediment and Cs redistribution in the Oginosawa River catchment near the Fukushima Dai-ichi Nuclear Power Plant using integrated watershed modeling

Sakuma, Kazuyuki; Malins, A.; Funaki, Hironori; Kurikami, Hiroshi; Niizato, Tadafumi; Nakanishi, Takahiro; Mori, Koji*; Tada, Kazuhiro*; Kobayashi, Takamaru*; Kitamura, Akihiro; et al.

Journal of Environmental Radioactivity, 182, p.44 - 51, 2018/02

https://doi.org/10.1016/j.jenvrad.2017.11.021

The Oginosawa River catchment lies 15 km south-west of the Fukushima Dai-ichi nuclear plant. The General-purpose Terrestrial Fluid-flow Simulator (GETFLOWS) code was used to study sediment and Cs redistribution within the catchment. Cesium-137 input to watercourses came predominantly from land adjacent to river channels and forest gullies. Forested areas far from the channels only made a minor contribution to Cs input to watercourses, total erosion of between 0.001-0.1 mm from May 2011 to December 2015. The 2.3-6.9% y decrease in the amount of Cs in forest topsoil over the study period can be explained by radioactive decay (approximately 2.3% y), along with a migration downwards into subsoil and a small amount of export. The amount of Cs available for release from land adjacent to rivers is expected to be lower in future than compared to this study period, as the simulations indicate a high depletion of inventory from these areas.

Characteristics of radio-cesium transport and discharge between different basins near to the Fukushima Dai-ichi Nuclear Power Plant after heavy rainfall events

Sakuma, Kazuyuki; Kitamura, Akihiro; Malins, A.; Kurikami, Hiroshi; Machida, Masahiko; Mori, Koji*; Tada, Kazuhiro*; Kobayashi, Takamaru*; Tawara, Yasuhiro*; Tosaka, Hiroyuki*

Journal of Environmental Radioactivity, 169-170, p.137 - 150, 2017/04

https://doi.org/10.1016/j.jenvrad.2016.12.006

This paper describes watershed modeling of catchments surrounding the Fukushima Dai-ichi Nuclear Power Plant to understand radio-cesium redistribution by water flows and sediment transport. We extended our previously developed three-dimensional hydrogeological model of the catchments to calculate the migration of radio-cesium in both sediment-sorbed and dissolved forms. The simulations cover the entirety of 2013, including nine heavy rainfall events, as well as Typhoon Roke in September 2011. Typhoons Man-yi and Wipha were the strongest typhoons in 2013 and had the largest bearing on radio-cesium redistribution. The simulated Cs discharge quantities over the nine events in 2013 are in good agreement with field monitoring observations. Deposition mainly occurs on flood plains and points where the river beds broaden in the lower basins, and within dam reservoirs along the rivers. Differences in Cs discharge ratios between the five basins are explained by differences in the initial fallout distribution within the basins, the presence of dam reservoirs, and the input supply to watercourses. It is possible to use these simulation results to evaluate future radioactive material distributions in order to support remediation planning.

Small-angle neutron scattering study of specific interaction and coordination structure formed by mono-acetyl-substituted dibenzo-20-crown-6-ether and cesium ions

Motokawa, Ryuhei; Kobayashi, Toru; Endo, Hitoshi*; Ikeda, Takashi; Yaita, Tsuyoshi; Suzuki, Shinichi; Narita, Hirokazu*; Akutsu, Kazuhiro*; Heller, W. T.*

Journal of Nuclear Science and Technology, 53(8), p.1205 - 1211, 2016/08

https://doi.org/10.1080/00223131.2015.1102100

Progress report of Japanese simulation research projects using the high-performance computer system Helios in the International Fusion Energy Research Centre

Ishizawa, Akihiro*; Idomura, Yasuhiro; Imadera, Kenji*; Kasuya, Naohiro*; Kanno, Ryutaro*; Satake, Shinsuke*; Tatsuno, Tomoya*; Nakata, Motoki*; Nunami, Masanori*; Maeyama, Shinya*; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 92(3), p.157 - 210, 2016/03

http://www.jspf.or.jp/Journal/PDF_JSPF/jspf2016_03/jspf2016_03-157.pdf

The high-performance computer system Helios which is located at The Computational Simulation Centre (CSC) in The International Fusion Energy Research Centre (IFERC) started its operation in January 2012 under the Broader Approach (BA) agreement between Japan and the EU. The Helios system has been used for magnetised fusion related simulation studies in the EU and Japan and has kept high average usage rate. As a result, the Helios system has contributed to many research products in a wide range of research areas from core plasma physics to reactor material and reactor engineering. This project review gives a short catalogue of domestic simulation research projects. First, we outline the IFERC-CSC project. After that, shown are objectives of the research projects, numerical schemes used in simulation codes, obtained results and necessary computations in future.

Behavior of tritium in the vacuum vessel of JT-60U

Kobayashi, Kazuhiro; Torikai, Yuji*; Saito, Makiko; Alimov, V. Kh.*; Miya, Naoyuki; Ikeda, Yoshitaka

Fusion Science and Technology, 67(2), p.428 - 431, 2015/03

https://doi.org/10.13182/FST14-T46

Disassembly of the JT-60U torus was started in 2010 after 18 years deuterium operations. In the disassembly of the JT-60U torus, tritium retention in the vacuum vessel of the JT-60U is one of the most important safety issues for the fusion reactor. It was very important to study the tritium behavior in Inconel 625 from viewpoint of the clearance procedure in the future plan. After the tritium release for about 1 year at 298 K, the residual tritium in the specimen was released by heating up to 1073 K, and then the residual tritium in the specimen was measured by chemical etching method. Most of the chemical form of the released tritium was HTO. The contaminated specimen by tritium was released continuously the diffusible tritium under the ambient condition. In the tritium release experiment, most of tritium in the specimen was released during 1 year.

Dismantlement of large fusion experimental device JT-60U

Ikeda, Yoshitaka; Okano, Fuminori; Sakasai, Akira; Hanada, Masaya; Akino, Noboru; Ichige, Hisashi; Kaminaga, Atsushi; Kiyono, Kimihiro; Kubo, Hirotaka; Kobayashi, Kazuhiro; et al.

Nihon Genshiryoku Gakkai Wabun Rombunshi, 13(4), p.167 - 178, 2014/12

https://doi.org/10.3327/taesj.J14.007

The JT-60U torus was disassembled so as to newly install the superconducting tokamak JT-60SA torus. The JT-60U used the deuterium for 18 years, so the disassembly project of the JT-60U was the first disassembly experience of a fusion device with radioactivation in Japan. All disassembly components were stored with recording the data such as dose rate, weight and kind of material, so as to apply the clearance level regulation in future. The lessons learned from the disassembly project indicated that the cutting technologies and storage management of disassembly components were the key factors to conduct the disassembly project in an efficient way. After completing the disassembly project, efforts have been made to analyze the data for characterizing disassembly activities, so as to contribute the estimation of manpower needs and the radioactivation of the disassembly components on other fusion devices.

Hydrogen isotope behavior on a water-metal boundary with simultaneous transfer from and to the metal surface

Hayashi, Takumi; Isobe, Kanetsugu; Nakamura, Hirofumi; Kobayashi, Kazuhiro; Oya, Yasuhisa*; Okuno, Kenji*; Oyaizu, Makoto; Edao, Yuki; Yamanishi, Toshihiko

Fusion Engineering and Design, 89(7-8), p.1520 - 1523, 2014/10

https://doi.org/10.1016/j.fusengdes.2014.03.069

Tritium confinement is the most important safety issue in the fusion reactor. Tritium behavior on the water metal boundary is very important to design tritium plant with breading blanket system using cooling water. A series of tritium permeation experiment into pressurized water or water vapor jacket with He or Ar have been performed through pure iron piping with/without 7 micro-meter gold plating, which contained about 1 kPa of pure tritium gas at 423 K, with monitoring the chemical forms of tritium. Also, deuterium permeation experiments from heavy water vessel through various metal piping, such as pure iron (Fe), nickel (Ni), stainless steel (SS304), and pure iron with 10 micro-meter gold plating, were performed at 573 K and at 15 MPa. Recently, using the above heavy water system, we have succeeded to detect simultaneous hydrogen isotopes transfer from and to the metal surface by introducing H gas to the metal piping after stabilized deuterium permeation was detected.

Preparation of tungsten carbide nanoparticles by ion implantation and electrochemical etching

Kato, Sho; Yamaki, Tetsuya; Yamamoto, Shunya; Hakoda, Teruyuki; Kawaguchi, Kazuhiro; Kobayashi, Tomohiro*; Suzuki, Akihiro*; Terai, Takayuki*

Nuclear Instruments and Methods in Physics Research B, 314, p.149 - 152, 2013/11

https://doi.org/10.1016/j.nimb.2013.05.052

We implanted 100 keV W in unpolished GC substrates at nominal fluences up to ions/cm. The implanted samples were electrochemically anodized in a NaOH aqueous solution to etch the surface layer. The analyses were performed by X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry (RBS), and transmission electron microscopy (TEM). XPS W 4f spectra indicated the formation of carbides as reported previously. The electrochemical etching clearly increased the W concentration on the surface. According to the RBS results, half of the implanted W atoms were retained in the substrate, while the rest should escape to the etching solution. The cross-sectional TEM image revealed a uniform distribution of WC particles with a diameter of less than 10 nm just near the surface region.