Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Sunagawa, Hikaru*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Fujihara, Masayoshi; Tampo, Motonobu*; Kawamura, Naritoshi*; et al.
Interactions (Internet), 245(1), p.31_1 - 31_6, 2024/12
Yoshimoto, Masataka*; Tamura, Kazuhisa; Watanabe, Kenta*; Shimizu, Keisuke*; Horisawa, Yuhei*; Kobayashi, Takeshi*; Tsurita, Hanae*; Suzuki, Kota*; Kanno, Ryoji*; Hirayama, Masaaki*
Sustainable Energy & Fuels (Internet), 8(6), p.1236 - 1244, 2024/03
Times Cited Count：0Photo-rechargeable systems, which can efficiently convert and store solar energy into chemical energy within single devices, are essential to harness sunlight effectively. Photo-(de)intercalation plays a pivotal role in the functionality of photorechargeable systems. Nevertheless, the photo-(de)intercalation process has not been conclusively confirmed owing to potential interference from side reactions, such as the decomposition of liquid electrolytes and the elution of electrode materials. In this study, we successfully demonstrated photo-responsive Li
-deintercalation using an all-solid-state thin-film battery comprised of epitaxially-grown anatase TiO
doped with Nb (a-TiO:Nb) as the cathode. Under light irradiation, Li-deintercalation occurred and was subsequently reversibly intercalated into a-TiO:Nb during discharge.
Higa, Ryota*; Fujihara, Hiro*; Toda, Hiroyuki*; Kobayashi, Masakazu*; Ebihara, Kenichi; Takeuchi, Akihisa*
Keikinzoku, 73(11), p.530 - 536, 2023/11
In Al-Zn-Mg alloys, suppression of hydrogen embrittlement is necessary to improve their strength. In this study, the distribution of stress, strain, and hydrogen concentration in the actual fracture region was investigated using the crystal plasticity finite element method and hydrogen diffusion analysis based on a model derived from three-dimensional polycrystalline microstructural data obtained by X-ray CT. In addition, the distributions of stress, strain, and hydrogen concentration were compared with the actual crack initiation behavior by combining in-situ observation of tensile tests using X-ray CT and simulation. The results show that stress loading perpendicular to the grain boundary due to crystal plasticity dominates grain boundary crack initiation. It was also found that internal hydrogen accumulation due to crystal plasticity has little effect on crack initiation.
Tamii, Atsushi*; Pellegri, L.*; S
derstrm, P.-A.*; Allard, D.*; Goriely, S.*; Inakura, Tsunenori*; Khan, E.*; Kido, Eiji*; Kimura, Masaaki*; Litvinova, E.*; et al.
European Physical Journal A, 59(9), p.208_1 - 208_21, 2023/09
Times Cited Count：1 Percentile：0.02(Physics, Nuclear)no abstracts in English
Umino, Yoshinori; Kato, Keisuke; Tanigawa, Masafumi; Kobayashi, Daisuke; Obu, Tomoyuki; Kimura, Yuichi*; Nemoto, Ryo*; Tajiri, Kazuma*
Nihon Hozen Gakkai Dai-19-Kai Gakujutsu Koenkai Yoshishu, p.33 - 36, 2023/08
In the basic laboratory of the Plutonium Conversion Development Facility in Tokai Reprocessing Plant, tests had been conducted to obtain effective data for manufacturing mixed plutonium and uranium oxide powder by irradiating a mixture of plutonium and uranium solution with microwaves. The test has already been completed, and we are currently dismantling and removing equipment. In this paper, techniques related to equipment renewal, dismantling and removal works inside the glove-box are discussed.
Yamamoto, Masahiko; Nishida, Naoki; Kobayashi, Daisuke; Nemoto, Ryo*; Hayashi, Hiroyuki*; Kitao, Takahiko; Kuno, Takehiko
JAEA-Technology 2023-004, 30 Pages, 2023/06
JAEA-Technology-2023-004.pdf:1.94MB
Glove-box gloves, that are used for handling nuclear fuel materials at the Tokai Reprocessing Plant (TRP) of the Japan Atomic Energy Agency, have an expiration date by internal rules. All gloves are replaced at a maximum of every 4-year. However, degrees of glove deterioration varies depending on its usage environment such as frequency, chemicals, and radiation dose. Therefore, physical properties such as tensile strength, elongation, hardness of gloves are measured and technical evaluation method for the glove life-time is established. It was found that gloves without any defects in its appearance have enough physical properties and satisfies the acceptance criteria values of new gloves. Thus, it was considered that the expired gloves could be used for total of 8-year, by adding 4-year of new glove life-time. In addition, the results of extrapolation by plotting the glove's physical properties versus the used years showed that the physical properties at 8-year is on the safer side than the reported physical properties of broken glove. Also, the data are not significantly different from the physical properties of the long-term storage glove (8 and 23 years). Based on these results, life-time of gloves at TRP is set to be 8-year. The frequency of glove inspections are not changed, and if any defects is found, the glove is promptly replaced. Thus, the risk related to glove usage is not increased. The cost of purchasing gloves, labor for glove replacement, and the amount of generated waste can be reduced by approximately 40%, respectively, resulting in more efficient and rationalized glove management.
, Zr, and stainless steel and leaching behavior of the fission products and matrix elementsTonna, Ryutaro*; Sasaki, Takayuki*; Kodama, Yuji*; Kobayashi, Taishi*; Akiyama, Daisuke*; Kirishima, Akira*; Sato, Nobuaki*; Kumagai, Yuta; Kusaka, Ryoji; Watanabe, Masayuki
Nuclear Engineering and Technology, 55(4), p.1300 - 1309, 2023/04
Times Cited Count：1 Percentile：72.91(Nuclear Science & Technology)Simulated debris was synthesized using UO, Zr, and stainless steel and a heat treatment method under inert or oxidizing conditions. The primary U solid phase of the debris synthesized at 1473 K under inert conditions was UO, whereas a (U,Zr)O solid solution formed at 1873 K. Under oxidizing conditions, a mixture of U
O
and (Fe,Cr)UO
phases formed at 1473 K whereas a (U,Zr)O
solid solution formed at 1873 K. The leaching behavior of the fission products from the simulated debris was evaluated using two methods: the irradiation method, for which fission products were produced via neutron irradiation, and the doping method, for which trace amounts of non-radioactive elements were doped into the debris. The dissolution behavior of U depended on the properties of the debris and aqueous medium the debris was immersed in. Cs, Sr, and Ba leached out regardless of the primary solid phases. The leaching of high-valence Eu and Ru ions was suppressed, possibly owing to their solid-solution reaction with or incorporation into the uranium compounds of the simulated debris.
Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Natori, Hiroaki*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Tampo, Motonobu*; Kawamura, Naritoshi*; Teshima, Natsuki*; et al.
Journal of Physics; Conference Series, 2462, p.012033_1 - 012033_5, 2023/03
Times Cited Count：0 Percentile：0.2(Physics, Applied)Kobayashi, Daisuke; Yamamoto, Masahiko; Nishida, Naoki; Miyoshi, Ryuta; Nemoto, Ryo*; Hayashi, Hiroyuki*; Kato, Keisuke; Nishino, Saki; Kuno, Takehiko; Kitao, Takahiko; et al.
Nihon Hozen Gakkai Dai-18-Kai Gakujutsu Koenkai Yoshishu, p.237 - 240, 2022/07
All gloves attached to glove-box in Tokai Reprocessing Plant have a fixed expiration date and have to be replaced every 4-year. However, degrees of glove deterioration are different depending on its usage environment (frequency, chemicals, radiation, etc.), because of rubber products. Therefore, physical properties such as tensile strength, elongation, hardness of gloves are measured, and the life-time of gloves are estimated. As a result, gloves without any defects in its appearance have enough physical property for acceptance criteria of new glove. The extrapolated physical property of glove is sufficiently larger than the reported values of damaged glove. No deterioration in physical properties of gloves, that are periodically replaced without any defects in its appearance, is observed and the usable life-time of the glove is estimated to be 8 years.
Kurita, Keisuke; Sakai, Takuro; Suzui, Nobuo*; Yin, Y.-G.*; Sugita, Ryohei*; Kobayashi, Natsuko*; Tanoi, Keitaro*; Kawachi, Naoki*
Japanese Journal of Applied Physics, 60(11), p.116501_1 - 116501_4, 2021/11
Times Cited Count：1 Percentile：7.86(Physics, Applied)Radioisotope tracer imaging is useful for studying plant physiological phenomena. In this study, we developed an autoradiography system with phosphor powder (ZnS:Ag), "Live-autoradiography", for imaging radioisotope dynamics in a living plant. This system visualizes the element migration and accumulation in intact plants continuously under a light environment. An imaging test was performed on point sources of 
Cs, with a radioactivity of 10-100 kBq of being observed; this indicates satisfactory system linearity between the image intensity and the radioactivity of Cs. Moreover, dynamics imaging of Cs was performed on an intact soybean plant for four days. The serial images indicated Cs accumulation in the node, vein, and growing point of the plant. The developed system can be used for studying plant physiological phenomena and can be employed for quantitative measurement of radionuclides.
Komatsu, Yuya*; Shimizu, Ryota*; Wilde, M.*; Kobayashi, Shigeru*; Sasahara, Yuki*; Nishio, Kazunori*; Shigematsu, Kei*; Otomo, Akira*; Fukutani, Katsuyuki; Hitosugi, Taro*
Crystal Growth & Design, 20(9), p.5903 - 5907, 2020/09
Times Cited Count：5 Percentile：46.4(Chemistry, Multidisciplinary)
Ikeda, Shugo*; Kaneko, Koji; Tanaka, Yuki*; Kawasaki, Takuro; Hanashima, Takayasu*; Munakata, Koji*; Nakao, Akiko*; Kiyanagi, Ryoji; Ohara, Takashi; Mochizuki, Kensei*; et al.
Journal of the Physical Society of Japan, 89(1), p.014707_1 - 014707_7, 2020/01
Times Cited Count：1 Percentile：12.02(Physics, Multidisciplinary)Kondo, Yasuhiro; Hirano, Koichiro; Ito, Takashi; Kikuzawa, Nobuhiro; Kitamura, Ryo; Morishita, Takatoshi; Oguri, Hidetomo; Okoshi, Kiyonori; Shinozaki, Shinichi; Shinto, Katsuhiro; et al.
Journal of Physics; Conference Series, 1350, p.012077_1 - 012077_7, 2019/12
Times Cited Count：1 Percentile：52.28(Physics, Particles & Fields)We have upgraded a 3-MeV linac at J-PARC. The ion source is same as the J-PARC linac's, and the old 30-mA RFQ is replaced by a spare 50-mA RFQ, therefore, the beam energy is 3 MeV and the nominal beam current is 50 mA. The main purpose of this system is to test the spare RFQ, but also used for testing of various components required in order to keep the stable operation of the J-PARC accelerator. The accelerator has been already commissioned, and measurement programs have been started. In this paper, present status of this 3-MeV linac is presented.
VAl Heusler alloy thin films; Appearance of antiferromagnetism and exchange bias in a layered structure with FeTsuchiya, Tomoki*; Kobayashi, Ryota*; Kubota, Takahide*; Saito, Kotaro*; Ono, Kanta*; Ohara, Takashi; Nakao, Akiko*; Takanashi, Koki*
Journal of Physics D; Applied Physics, 51(6), p.065001_1 - 065001_7, 2018/02
Times Cited Count：10 Percentile：45.99(Physics, Applied)Kobayashi, Daima*; Yoshikawa, Tomohide*; Matsuo, Mamoru*; Iguchi, Ryo*; Maekawa, Sadamichi; Saito, Eiji; Nozaki, Yukio*
Physical Review Letters, 119(7), p.077202_1 - 077202_5, 2017/08
Times Cited Count：119 Percentile：97.53(Physics, Multidisciplinary)Toguri, Satohito*; Kobayashi, Shinji*; Tsuji, Masakuni*; Yahagi, Ryoji*; Yamada, Toshiko*; Matsui, Hiroya; Sato, Toshinori; Mikake, Shinichiro; Aoyagi, Yoshiaki
JAEA-Technology 2017-005, 43 Pages, 2017/03
JAEA-Technology-2017-005.pdf:4.4MB
The study on engineering technology in the Mizunami Underground Research Laboratory (MIU) project roughly consists of (1) development of design and construction planning technologies, (2) development of construction technology, (3) development of countermeasure technology, (4) development of technology for security, and (5) development of technologies regarding restoration and mitigating of the excavation effect. In FY2015, as a part of the important issues on the research program, water-tight grouting method has been developed. Grouting methods utilized in the MIU were evaluated and the post-excavation grouting at the -500m Access/Research Gallery-South was planned based on these evaluation results. Also, technology development from the viewpoint of geological disposal was summarized, and information on the alternative method to the grouting method was collected and organized.
Ichikawa, Shoichi; Chiba, Yusuke; Ono, Fumiyasu; Hatori, Masakazu; Kobayashi, Takanori; Uekura, Ryoichi; Hashiri, Nobuo*; Inuzuka, Taisuke*; Kitano, Hiroshi*; Abe, Hisashi*
JAEA-Research 2017-001, 40 Pages, 2017/03
JAEA-Research-2017-001.pdf:5.19MB
In order to reduce the influence on a plant schedule of the MONJU by the maintenance of dew point hygrometers, The JAEA examined a capacitance type dew point hygrometer as an alternative dew point hygrometer for a lithium-chloride type dew point hygrometer which had been used at the CV-LRT in the MONJU. As a result of comparing a capacitance type dew point hygrometer with a lithium-chloride type dew point hygrometer at the CV-LRT (Atmosphere: nitrogen, Testing time: 24 hours), there weren't significant difference between a capacitance type dew point hygrometer and a lithium-chloride type dew point hygrometer. As a result of comparing a capacitance dew point hygrometer with a high-mirror-surface type dew point hygrometer for long term verification (Atmosphere: air, Testing time: 24 months), the JAEA confirmed that a capacitance type dew point hygrometer satisfied the instrument specification (
2.04
C) required by the JEAC4203-2008.
Ichikawa, Shoichi; Chiba, Yusuke; Ono, Fumiyasu; Hatori, Masakazu; Kobayashi, Takanori; Uekura, Ryoichi; Hashiri, Nobuo*; Inuzuka, Taisuke*; Kitano, Hiroshi*; Abe, Hisashi*
JAEA-Research 2016-021, 32 Pages, 2017/02
JAEA-Research-2016-021.pdf:5.0MB
In order to reduce the influence on a plant schedule of the MONJU by the maintenance of dew point hygrometers, The JAEA examined a capacitance type dew point hygrometer as an alternative dew point hygrometer for a lithium-chloride type dew point hygrometer which had been used at the CV-LRT in the MONJU. As a result of comparing a capacitance type dew point hygrometer with a lithium-chloride type dew point hygrometer at the CV-LRT (Atmosphere: nitrogen, Testing time: 24 hours), there weren't significant difference between a capacitance type dew point hygrometer and a lithium-chloride type dew point hygrometer. As a result of comparing a capacitance dew point hygrometer with a high-mirror-surface type dew point hygrometer for long term verification (Atmosphere: air, Testing time: 24 months), the JAEA confirmed that a capacitance type dew point hygrometer satisfied the instrument specification (2.04C) required by the JEAC4203-2008.
Suzuki, Ryota*; Kobayashi, Yoshinori*; Kuno, Yoshinori*; Yamada, Taichi; Yamazaki, Keiichi*; Yamazaki, Akiko*
International Journal on Artificial Intelligence Tools, 25(5), p.1640005_1 - 1640005_19, 2016/10
Times Cited Count：1 Percentile：10.6(Computer Science, Artificial Intelligence)To meet the demands of an aging society, research on intelligent/robotic wheelchairs have been receiving a lot of attention. In elderly care facilities, care workers are required to communicate with the elderly in order to maintain both their mental and physical health. While this is regarded as important, having a conversation with someone on a wheelchair while pushing it from behind in a traditional setting would interfere with their smooth and natural conversation. So we are developing a robotic wheelchair system which allows companions and wheelchair users to move in a natural formation. This paper reports on an investigation to learn the patterns of human behavior when the wheelchair users and their companions communicate while walking together. The ethnographic observation reveals a natural formation of positioning for both companions and wheelchair users. Based on this investigation, we propose a multiple robotic wheelchair system which can maintain desirable formations for communication between wheelchairs.
ssbauer spectroscopyAgui, Akane; Masuda, Ryo*; Kobayashi, Yasuhiro*; Kato, Tadashi*; Emoto, Shun*; Suzuki, Kosuke*; Sakurai, Hiroshi*
Journal of Magnetism and Magnetic Materials, 408, p.41 - 45, 2016/06
Times Cited Count：4 Percentile：21.26(Materials Science, Multidisciplinary)We investigated the magnetization process of Fe (110) film using the field dependence of magnetic Compton scattering and Mssbauer spectroscopy. From the magnetic Compton profiles, the spin and orbital magnetic moment specific magnetization versus magnetizing field curves were obtained. From the Mssbauer spectra, the angles between the magnetizing field and the magnetic moment were obtained. It was found that the magnetizing field dependence of the ratio between orbital moment and spin moment was related to the angles between the magnetizing field and the magnetic moment. We indicate that the magnetic field dependence of the orbital magnetic moment plays a role in the magnetization process.
