Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Amekura, Hiroshi*; Chettah, A.*; Narumi, Kazumasa*; Chiba, Atsuya*; Hirano, Yoshimi*; Yamada, Keisuke*; Yamamoto, Shunya*; Leino, A. A.*; Djurabekova, F.*; Nordlund, K.*; et al.
Nature Communications (Internet), 15, p.1786_1 - 1786_10, 2024/02
Injecting high-energy heavy ions in the electronic stopping regime into solids can create cylindrical damage zones called latent ion tracks. Although these tracks form in many materials, none have ever been observed in diamond, even when irradiated with high-energy GeV uranium ions. Here we report the first observation of ion track formation in diamond irradiated with 2-9 MeV C
fullerene ions. Depending on the ion energy, the mean track length (diameter) changed from 17 (3.2) nm to 52 (7.1) nm. High resolution scanning transmission electron microscopy (HR-STEM) indicated the amorphization in the tracks, in which 
-bonding signal from graphite was detected by the electron energy loss spectroscopy (EELS).
Takubo, Yusaku*; Takayama, Yusuke; Idiart, A.*; Tanaka, Tatsuya*; Ishida, Keisuke*; Fujisaki, Kiyoshi*
Proceedings of 2022 International High Level Radioactive Waste Management Conference (IHLRWM 2022) (Internet), p.906 - 915, 2022/11
no abstracts in English
Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Bachrata, A.*; Gentet, D.*; Bertrand, F.*; Marie, N.*; Kubota, Ryuzaburo*; Sogabe, Joji; Sasaki, Keisuke; Kamiyama, Kenji; Yamano, Hidemasa; Kubo, Shigenobu
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 9 Pages, 2022/04
In the frame of France-Japan collaboration, one of the objectives is to define and assess the calculation methodologies, and to investigate the phenomenology and the consequences of severe accident scenarios in sodium fast reactors (SFRs). A methodology whose purpose is to assess the loadings of the structures induced by a Fuel Coolant Interaction (FCI) taking place in the sodium plenum of SFR has been defined in the frame of the collaboration between France and Japan during 2014-2019. The work progress will be spread over the period 2020-2024 and the main objectives and milestones will be introduced in the paper. The objective of studies is to comprehensively address the margin between the limit of integrity of the main vessel structures and the loadings resulting from severe accidents. For this purpose, the SIMMER mechanistic calculation code simulates core disruptive accident sequences in SFRs. A fluid structure dynamics tool evaluates this interaction i.e. EUROPLEXUS is used in CEA studies and AUTODYN tool is used in JAEA studies. In the paper, a benchmark study is described in order to illustrate the evaluation of vapour expansion phase in the hot plenum. To do that, joint input data are used on the basis of an ASTRID 1500 MWth core degraded state after the power excursion which leads to vapour expansion. The most penalizing case was evidenced in this study by suppressing the action of transfer tube in-core mitigation devices in SIMMER input deck and thus privileging the upward molten core ejection. Even if the most penalizing case was evidenced in this paper, no significant RV deformation was observed in both EUROPLEXUS and AUTODYN calculation results. The assumed mechanical energy was small for the core expansion phase.
Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.
Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12
Times Cited Count：6 Percentile：51.19(Geosciences, Multidisciplinary)The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.
Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.
High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02
As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950
C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.
Amekura, Hiroshi*; Toulemonde, M.*; Narumi, Kazumasa*; Li, R.*; Chiba, Atsuya*; Hirano, Yoshimi*; Yamada, Keisuke*; Yamamoto, Shunya*; Ishikawa, Norito; Okubo, Nariaki; et al.
Scientific Reports (Internet), 11(1), p.185_1 - 185_11, 2021/01
Times Cited Count：12 Percentile：75.03(Multidisciplinary Sciences)We report the track formation of 10 nm in diameter in silicon irradiated with 6 MeV C, i.e., much lower energy than the previously reported energy threshold.
Miyakawa, Susumu*; Ito, Toshimasa*; Iwahori, Keisuke*; Aoyama, Yoshihiko*; Kubo, Ryosuke*; Murata, Shinji*; Shobu, Takahisa; Shiro, Ayumi*; Kajiwara, Kentaro*
Zairyo, 69(4), p.308 - 314, 2020/04
White etching area which looks white with nital corrosive liquid may be recognized at the flaking part of a rolling bearing on which high contact stress of several GPa is applied repeatedly. Up to now, studies of white etching area of a ball have been less than studies of white etching area of inner and outer rings. In this study, as part of the flaking mechanism explication with white etching area of a ball, internal residual stress distributions of ball by using high energy white X-ray of SPring-8 (A method) and laboratorial X-ray measurement equipment (B method) were investigated. The former was modified by surface residual stress according to B method. The latter was modified by releasing stress in the form of electrolytic polishing. The results showed modified residual stress distributions almost agree qualitatively.
Usui, Aya; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Kitano, Toshihiko*; Takayama, Terumitsu*; Orimo, Takao*; Kanai, Shinji*; Aoki, Yuki*; Hashizume, Masashi*; et al.
Dai-28-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.117 - 119, 2015/12
no abstracts in English
Yuyama, Takahiro; Ishibori, Ikuo; Kurashima, Satoshi; Yoshida, Kenichi; Ishizaka, Tomohisa; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Usui, Aya; Miyawaki, Nobumasa; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.302 - 304, 2015/09
no abstracts in English
Saito, Toru; Okubo, Toshikazu*; Izumi, Keisuke*; Okawa, Yoshinao*; Kobayashi, Norihiro*; Yamazaki, Toru; Kawano, Katsumi; Isono, Takaaki
Teion Kogaku, 50(8), p.400 - 408, 2015/08
Aramid fiber-reinforced plastic (AFRP) has been developed as a structural material that has the advantages of light weight and high strength. In this study, tensile tests were carried out to measure the tensile properties of AFRP rod on the market for reinforcement of concrete at room temperature, 77 K and 4.2 K. Especially at cryogenic temperatures, it is difficult to perform a tensile test of the bar because the specimen slips through the jig grip. To prevent the rod from slipping, tensile tests were carried out with some filling conditions. The applicable and appropriate tensile test conditions were established by modifying the jig grip, treating the surface of the rod and using cryogenic epoxy infill to grip the rod. They were more than 1100 MPa. Additionally, the AFRP rod included a temperature dependence in which the Young's modulus increased as the test temperature decreased. It was confirmed that the Young's modulus increased because aramid fiber was more dominant than epoxy.
Usui, Aya; Uno, Sadanori; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Kitano, Toshihiko*; Takayama, Terumitsu*; Orimo, Takao*; Kanai, Shinji*; Aoki, Yuki*; et al.
Dai-27-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.118 - 121, 2015/03
no abstracts in English
Yamada, Keisuke; Saito, Yuichi; Ishii, Yasuyuki; Matoba, Shiro; Chiba, Atsuya; Yokoyama, Akihito; Usui, Aya; Sato, Takahiro; Okubo, Takeru; Uno, Sadanori
JAEA-Review 2013-059, JAEA Takasaki Annual Report 2012, P. 159, 2014/03
no abstracts in English
Uno, Sadanori; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Usui, Aya; Saito, Yuichi; Ishii, Yasuyuki; Sato, Takahiro; Okubo, Takeru; Nara, Takayuki; et al.
JAEA-Review 2013-059, JAEA Takasaki Annual Report 2012, P. 179, 2014/03
Three electrostatic accelerators at TIARA were operated on schedule in fiscal year 2012 except changing its schedule by cancellations of users. The yearly operation time of the 3 MV tandem accelerator, the 400 kV ion implanter and the 3MV single-ended accelerator were in the same levels as the ordinary one, whose operation time totaled to 2,073, 1,847 and 2,389 hours, respectively. The tandem accelerator had no trouble, whereas the ion implanter and the single-ended accelerator stopped by any troubles for one day and four days, respectively. The molecular ion beam of helium hydride was generated by the ion implanter, because the users required irradiation of several cluster ions in order to study the effect of irradiation. As a result, its intensity of beam was 50 nA at 200 kV. The ion beam of tungsten (W) at 15 MeV was accelerated by the tandem accelerator, whose intensity was 20 nA at charge state of 4+, because of the request from a researcher in the field of nuclear fusion.
Uno, Sadanori; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Usui, Aya; Kitano, Toshihiko*; Takayama, Terumitsu*; Orimo, Takao*; Kanai, Shinji*; Aoki, Yuki*; et al.
Dai-26-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.79 - 81, 2013/07
Three electrostatic accelerators at TIARA were operated on schedule in fiscal year 2012 except changing its schedule by cancellations of users. The yearly operation time of the 3MV tandem accelerator, the 400 kV ion implanter and the 3 MV single-ended accelerator were in the same levels as the ordinary one, whose operation time totaled to 2,073, 1,847 and 2,389 hours, respectively. The tandem accelerator had no trouble, whereas the ion implanter and the single-ended accelerator stopped by any troubles for one day and four days, respectively. The ion implanter generated molecular ion beam of helium hydride by using the Freeman type ion source, because of the request from the user. As a result, its intensity of beam was 50 nA at 200 kV.
Yamada, Keisuke; Chiba, Atsuya; Yokoyama, Akihito; Saito, Yuichi; Ishii, Yasuyuki; Sato, Takahiro; Okubo, Takeru; Uno, Sadanori
JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 155, 2013/01
no abstracts in English
Uno, Sadanori; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Saito, Yuichi; Ishii, Yasuyuki; Sato, Takahiro; Okubo, Takeru; Nara, Takayuki; Kitano, Toshihiko*; et al.
JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 173, 2013/01
The three electrostatic accelerators at the TIARA had no mechanical damage when the Tohoku earthquake happened on March 11, 2011. But, they could not be operated during April, due to the influence of planned power outage by TEPCO. These accelerators additionally operated on Saturday for ten days in order to compensate for the lost experiment time. As a result, the yearly operation time had kept the same level as the ordinary one. The ion beam of erbium (Er) with 11.7MeV was accelerated newly by the tandem accelerator, whose intensity was 20nA at charge state of 3+. The sequential generation/irradiation of two different kinds of fullerene ions was achieved at the ion implanter by a mixed powder method without exchange of the Freeman type ion source by the user's request.
Uno, Sadanori; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Saito, Yuichi; Ishii, Yasuyuki; Sato, Takahiro; Okubo, Takeru; Nara, Takayuki; Kitano, Toshihiko*; et al.
Dai-7-Kai Takasaki Oyo Kenkyu Shimpojiumu Yoshishu, P. 119, 2012/10
The three electrostatic accelerators at TIARA had no damage when the Tohoku earthquake happened on March 11, 2011. But, they could not be operated until end of April, due to the influence of planned power outage and keep out into the controlled area for radiation. These accelerators additionally operated on Saturday for twelve days in order to compensate for the lost experiment time. Therefore, the yearly operation time had kept the same level as the ordinary one. The tandem accelerator has stopped leakage of the SF
gas from the base flange on the tank by the Viton gasket of rectangular cross section at the new type.
Uno, Sadanori; Chiba, Atsuya; Yamada, Keisuke; Yokoyama, Akihito; Kitano, Toshihiko*; Takayama, Terumitsu*; Orimo, Takao*; Kanai, Shinji*; Aoki, Yuki*; Yamada, Naoto*; et al.
Dai-25-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.64 - 66, 2012/07
The three electrostatic accelerators at the TIARA had no damage when the Tohoku earthquake happened on March 11, 2011. But, they could not be operated until end of April, due to the influence of planned power outage and keep out into the controlled area for radiation. These accelerators additionally operated on Saturday for twelve days in order to compensate for the lost experiment time. Therefore, the yearly operation time had kept the same level as the ordinary one. The tandem accelerator has stopped leakage of the SF gas from the base flange on the tank by the Viton gasket of rectangular cross section at the new type. The ion implanter could generate two kinds of fullerene ions by a mixed material of ions and a controlled temperature of the oven without exchange of ion source.
superstructureFukaya, Yuki; Kubo, Keisuke*; Hirahara, Toru*; Yamazaki, Shiro*; Choi, W. H.*; Yeom, H. W.*; Kawasuso, Atsuo; Hasegawa, Shuji*; Matsuda, Iwao*
e-Journal of Surface Science and Nanotechnology (Internet), 10, p.310 - 314, 2012/07
no abstracts in English
