Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
-MgAgSbLi, J.*; Li, X.*; Zhang, Y.*; Zhu, J.*; Zhao, E.*; Kofu, Maiko; Nakajima, Kenji; Avdeev, M.*; Liu, P.-F.*; Sui, J.*; et al.
Applied Physics Reviews (Internet), 11(1), p.011406_1 - 011406_8, 2024/03
Times Cited Count：0 Percentile：0.01(Physics, Applied)Kang, Z.; Okuda, Yukihiko; Nishida, Akemi; Tsubota, Haruji; Li, Y.
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
Most studies conducted till now on local damage of reinforced concrete (RC) slab structures subjected to projectile impact are about normal impact, while few research related to oblique impact can be found. The objective of this study is to carry out impact tests under different impact conditions including oblique impacts, to confirm the different impact behaviors of the RC slab structure, to develop an analysis method by investigating the test results and analytical conditions, and to validate the analysis method through comparison with the test results. This study focuses on the scabbing damage which is one of the local damage modes of RC slab. Based on oblique impact test results due to soft projectile with hemispherical nose shape, we investigate the relationship between the criterion related to the concrete fracture and the occurrence of scabbing damage.
Okuda, Yukihiko; Kang, Z.; Nishida, Akemi; Tsubota, Haruji; Li, Y.
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
The outer walls of nuclear facility buildings consist of reinforced concrete (RC) panels. When a projectile collides with a nuclear facility building, local damages such as penetration, scabbing, and perforation can occur in the RC panels. Numerical simulation using finite element analysis (FEA) is generally employed to assess these damage conditions. However, the impact analysis by FEA modelled with continuum elements is difficult to address phenomena such as scattering fragments of concrete because the elements deletion method for large deformation is used to prevent interruption of numerical calculations. Recently, a numerical method known as Smooth Particles Hydrodynamics (SPH), one of the particle methods, has been employed to address discontinuous phenomena. In this paper, we focus on the scabbing damages to RC panels and report on the findings obtained through the validation of the numerical analysis using the SPH method.
-Ti alloyZhang, B.*; Xin, S.*; Huang, M.*; Mao, W.; Jia, W.*; Li, Q.*; Li, S.*; Zhang, S.*; Mao, C.*
Materials Science & Engineering A, 890, p.145898_1 - 145898_7, 2024/01
Times Cited Count：0 Percentile：0(Nanoscience & Nanotechnology)A significant increase in the recovery strain of a high-Zr -Ti alloy from 2.25 % to 5.5 % when decreasing the deformation temperature from 300 K to 77 K is reported in this study. It is found that the super-elasticity of this alloy is independent of the -grain size at 77 K. The results reveal that a coarse-grained specimen exhibited approximately the same super-elasticity as its ultra-fine grain counterpart at 77 K. The relative easiness of deformation-induced martensitic transformation and dislocation slip was substantially changed at 77 K, with a strong suppression of dislocation slip, which overshadowed the effect of grain refinement on the super-elasticity.
SnHuang, Z.*; Wang, W.*; Ye, H.*; Bao, S.*; Shangguan, Y.*; Liao, J.*; Cao, S.*; Kajimoto, Ryoichi; Ikeuchi, Kazuhiko*; Deng, G.*; et al.
Physical Review B, 109(1), p.014434_1 - 014434_9, 2024/01
Times Cited Count：0R
hm, W.*; Ban, Nobuhiko*; Chen, J.*; Li, C.*; Dobynde, M.*; Durante, M.*; El-Jaby, S.*; Komiyama, Tatsuto*; Ozasa, Kotaro*; Sato, Tatsuhiko; et al.
Journal of Medical Physics - Zeitschrift fr medizinische Physik -, 10 Pages, 2024/00
The International Commission on Radiological Protection (ICRP) provides independent recommendations on radiological protection for the public benefit. For more than 90 years, the ICRP System of Radiological Protection has been guiding the development and implementation of national and international standards and regulations on radiological protection. In 2019, ICRP established Task Group (TG) 115 to address a broader range of topics related to dose and risk assessment for radiological protection of astronauts. This paper gives an overview of the System of Radiological Protection and a brief summary of ICRP's work on radiological protection of astronauts.
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; Xu, P. G.; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 11 Pages, 2024/00
Times Cited Count：0Zhang, A.*; Deng, K.*; Sheng, J.*; Liu, P.*; Kumar, S.*; Shimada, Kenya*; Jiang, Z.*; Liu, Z.*; Shen, D.*; Li, J.*; et al.
Chinese Physics Letters, 40(12), p.126101_1 - 126101_8, 2023/12
Times Cited Count：1 Percentile：0(Physics, Multidisciplinary)
states in the electronic structure of the intermediate-valence superconductor CeIr
Fujimori, Shinichi; Kawasaki, Ikuto; Takeda, Yukiharu; Yamagami, Hiroshi; Sasabe, Norimasa*; Sato, Yoshiki*; Shimizu, Yusei*; Nakamura, Ai*; Maruya, A.*; Homma, Yoshiya*; et al.
Electronic Structure (Internet), 5(4), p.045009_1 - 045009_7, 2023/11
Tamii, Atsushi*; Pellegri, L.*; S
derstrm, P.-A.*; Allard, D.*; Goriely, S.*; Inakura, Tsunenori*; Khan, E.*; Kido, Eiji*; Kimura, Masaaki*; Litvinova, E.*; et al.
European Physical Journal A, 59(9), p.208_1 - 208_21, 2023/09
Times Cited Count：1 Percentile：0.02(Physics, Nuclear)no abstracts in English
Bao, S.*; Gu, Z.-L.*; Shangguan, Y.*; Huang, Z.*; Liao, J.*; Zhao, X.*; Zhang, B.*; Dong, Z.-Y.*; Wang, W.*; Kajimoto, Ryoichi; et al.
Nature Communications (Internet), 14, p.6093_1 - 6093_9, 2023/09
Times Cited Count：1 Percentile：61.99(Multidisciplinary Sciences)Lu, K.; Takamizawa, Hisashi; Li, Y.; Masaki, Koichi*; Takagoshi, Daiki*; Nagai, Masaki*; Nannichi, Takashi*; Murakami, Kenta*; Kanto, Yasuhiro*; Yashirodai, Kenji*; et al.
Mechanical Engineering Journal (Internet), 10(4), p.22-00484_1 - 22-00484_13, 2023/08
OKondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
Times Cited Count：5 Percentile：92.64(Multidisciplinary Sciences)no abstracts in English
Ca cast doubt on a doubly magic 
CaChen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; Tsunoda, Yusuke*; Otsuka, Takaharu*; Chazono, Yoshiki*; Hagen, G.*; Holt, J. D.*; et al.
Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08
Times Cited Count：1 Percentile：0.02(Astronomy & Astrophysics)Gamma decays were observed in 
Ca and 
Ca following quasi-free one-proton knockout reactions from 
Sc. For Ca, a 
ray transition was measured to be 1456(12) keV, while for Ca an indication for a transition was observed at 1115(34) keV. Both transitions were tentatively assigned as the 
decays. A shell-model calculation in a wide model space with a marginally modified effective nucleon-nucleon interaction depicts excellent agreement with experiment for 
level energies, two-neutron separation energies, and reaction cross sections, corroborating the formation of a new nuclear shell above the N = 34 shell. Its constituents, the 
and 
orbitals, are almost degenerate. This degeneracy precludes the possibility for a doubly magic Ca and potentially drives the dripline of Ca isotopes to 
Ca or even beyond.
Ne at the transition into the island of inversion; Detailed structure study of NeWang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.
Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08
Times Cited Count：2 Percentile：68.16(Astronomy & Astrophysics)Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.
neutron diffraction study on the deformation behavior of the plastic inorganic semiconductor Ag
SWang, Y.*; Gong, W.; Kawasaki, Takuro; Harjo, S.; Zhang, K.*; Zhang, Z. D.*; Li, B.*
Applied Physics Letters, 123(1), p.011903_1 - 011903_6, 2023/07
Times Cited Count：1 Percentile：54.89(Physics, Applied)Li, C.-Y.; Wang, K.*; Uchibori, Akihiro; Okano, Yasushi; Pellegrini, M.*; Erkan, N.*; Takata, Takashi*; Okamoto, Koji*
Applied Sciences (Internet), 13(13), p.7705_1 - 7705_29, 2023/07
Times Cited Count：1 Percentile：0(Chemistry, Multidisciplinary)Li, S.; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.; Deng, D.*
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 7 Pages, 2023/07
Yamaguchi, Yoshihito; Takamizawa, Hisashi; Katsuyama, Jinya; Li, Y.
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 9 Pages, 2023/07
The stress intensity factor (SIF) for crack at nozzle corner is a key parameter in structural integrity assessment of nozzle in reactor pressure vessel (RPV). Although various SIF solutions for surface cracks at nozzle corners have been proposed, most of them are only focusing on the deepest point of the crack, and the information about geometric dimension of the nozzle corner is not clear. According to the previous fatigue test results regarding the surface crack at the nozzle corner, the amounts of crack growth at the surface points were larger than that at the deepest point of the crack. Such results imply that SIFs at the surface points may be higher than that at the deepest point. To increase the reliability of the structural integrity assessment, it is necessary to provide SIF solutions for both surface and deepest points. In this study, SIF solutions for two surface points and the deepest point of surface crack at nozzle corners are developed through finite element analyses and the solutions are provided corresponding to the geometric dimensions of nozzle corner and crack size.
Kinjo, Katsuki*; Fujibayashi, Hiroki*; Matsumura, Hiroki*; Hori, Fumiya*; Kitagawa, Shunsaku*; Ishida, Kenji*; Tokunaga, Yo; Sakai, Hironori; Kambe, Shinsaku; Nakamura, Ai*; et al.
Science Advances (Internet), 9(30), p.2736_1 - 2736_6, 2023/07
Times Cited Count：0 Percentile：0(Multidisciplinary Sciences)