Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hong, Z.*; Ahmed, Z.*; Pellegrini, M.*; Yamano, Hidemasa; Erkan, N.*; Sharma, A. K.*; Okamoto, Koji*
Progress in Nuclear Energy, 171, p.105160_1 - 105160_13, 2024/06
In this study, it is found that the eutectic reaction between BC powder and stainless steel (SS) is considerably more rapid than that between the BC pellet and SS. The derived reaction rate constant values for powder and pellet cases are consistently based on the reference values. Also, a composition analysis using SEM/EDS was conducted for the detailed microstructures of the powder and pellet samples. In the powder case, only one thick layer is found as the reaction layer consisting of (Fe, Cr)B precipitate, including BC powder. In the pellet case, two layers are found in the reaction layer.
Yamaguchi, Akiko; Kurihara, Yuichi*; Nagata, Kojiro*; Tanaka, Kazuya; Higaki, Shogo*; Kobayashi, Toru; Tanida, Hajime; Ohara, Yoshiyuki*; Yokoyama, Keiichi; Yaita, Tsuyoshi; et al.
Journal of Colloid and Interface Science, 661, p.317 - 332, 2024/05
Times Cited Count:0no abstracts in English
Sano, Naruto; Yamashita, Naoki; Watanabe, Masaya; Tsukada, Manabu*; Hoshino, Kazutoyo*; Hirai, Koki; Ikegami, Yuta*; Tashiro, Shinsuke; Yoshida, Ryoichiro; Hatakeyama, Yuichi; et al.
JAEA-Technology 2023-029, 36 Pages, 2024/03
At the Waste Safety Testing Facility (WASTEF), the gamma ray irradiation device "Gamma Cell 220" was relocated from the 4th research building of the Nuclear Science Research Institute in FY2019, and the use of gamma ray irradiation has begun. Initially, Fuel Cycle Safety Research Group, Fuel Cycle Safety Research Division, Nuclear Safety Research Center, Sector of Nuclear Safety Research and Emergency Preparedness, the owner of this device, conducted the tests as the main user, but since 2022, other users, including those outside the organization, have started using it. The gamma ray irradiation device "Gamma Cell 220" is manufactured by Nordion International Inc. in Canada. Since it was purchased in 1989, the built-in 60Co radiation source has been updated once, and safety research related to nuclear fuel cycles, etc. It is still used for this purpose to this day. This report summarizes the equipment overview of the gamma ray irradiation device "Gamma Cell 220", its permits and licenses at WASTEF, usage status, maintenance and inspection, and future prospects.
Futemma, Akira; Sanada, Yukihisa; Nagakubo, Azusa; Kawasaki, Yoshiharu*; Iwai, Takeyuki*; Hiraga, Shogo*; Haginoya, Masashi*; Matsunaga, Yuki*; Akutsu, Yuichiro*; Arai, Yoshinori*; et al.
JAEA-Technology 2023-027, 146 Pages, 2024/03
By the accident at Tokyo Electric Power Company's (TEPCO's) Fukushima Daiichi Nuclear Power Station (FDNPS), caused by tsunami triggered by the 2011 off the Pacific coast of Tohoku Earthquake, a large amount of radioactive material was released into the surrounding environment. After the accident, Airborne Radiation Monitoring (ARM) via manned helicopter has been applied as a method to quickly and extensively measure the distribution of radiation. Japan Atomic Energy Agency (JAEA) has continuously conducted ARM via manned helicopter around FDNPS. In this report, we summarize the results of the ARM around FDNPS in the fiscal year 2022, evaluate the changes of ambient dose rates and other parameters based on the comparison to the past ARM results, and discuss the causes of such changes. In order to contribute to improve the accuracy of ambient dose rate conversion, we analyzed the ARM data taking into account undulating topography, and evaluated the effect of this method. Furthermore, the effect of radon progenies in the air on the ARM was evaluated by applying the discrimination method to the measurement results.
Kokubun, Yuji; Nakada, Akira; Seya, Natsumi; Nagaoka, Mika; Koike, Yuko; Kubota, Tomohiro; Hirao, Moe; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; et al.
JAEA-Review 2023-052, 118 Pages, 2024/03
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2022. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Kokubun, Yuji; Nakada, Akira; Seya, Natsumi; Koike, Yuko; Nemoto, Masashi; Tobita, Keiji; Yamada, Ryohei*; Uchiyama, Rei; Yamashita, Daichi; Nagai, Shinji; et al.
JAEA-Review 2023-046, 164 Pages, 2024/03
The Nuclear Fuel Cycle Engineering Laboratories conducts environmental radiation monitoring around the reprocessing plant in accordance with the "Safety Regulations for Reprocessing Plant of JAEA, Part IV: Environmental Monitoring". This report summarizes the results of environmental radiation monitoring conducted during the period from April 2022 to March 2023 and the results of dose calculations for the surrounding public due to the release of radioactive materials into the atmosphere and ocean. In the results of the above environmental radiation monitoring, many items were affected by radioactive materials emitted from the accident at the Fukushima Daiichi Nuclear Power Plant of Tokyo Electric Power Company, Incorporated (changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016), which occurred in March 2011. Also included as appendices are an overview of the environmental monitoring plan, an overview of measurement methods, measurement results and their changes over time, meteorological statistics results, radioactive waste release status, and an evaluation of the data which deviated of the normal range.
Li, J.*; Li, X.*; Zhang, Y.*; Zhu, J.*; Zhao, E.*; Kofu, Maiko; Nakajima, Kenji; Avdeev, M.*; Liu, P.-F.*; Sui, J.*; et al.
Applied Physics Reviews (Internet), 11(1), p.011406_1 - 011406_8, 2024/03
Times Cited Count:0 Percentile:0.01(Physics, Applied)Sekine, Yurina; Nankawa, Takuya; Hiroi, Kosuke; Oba, Yojiro*; Nagakawa, Yoshiyasu*; Sugita, Tsuyoshi; Shibayama, Yuki; Ikeda-Fukazawa, Tomoko*
Carbohydrate Polymers, 327, p.121538_1 - 121538_11, 2024/03
Times Cited Count:0 Percentile:0.01(Chemistry, Applied)We describe non-toxic, tough nanocellulose (NC) hydrogels formed from chemically unmodified NC by cellulose crystalline transformation and subsequent freeze cross-linking reaction. Using low-concentration NaOH and freezing together induced the crystalline transformation of NC from cellulose I to II via freeze concentration. After the crystalline transformation, cross-linking between the NC and CA in the freeze concentration layer (FCL) provided a strong NC network structure, forming NC hydrogels with high mechanical strength. The freeze-cross-linked NC hydrogel easily retained powder adsorbents in its inner space by mixing the NC-NaOH sol and the powder, and the hydrogel showed high removal efficiency for heavy metals. The results highlight the versatility of chemically unmodified celluloses in developing functional materials, suggest possible practical applications.
Fujihara, Hiro*; Toda, Hiroyuki*; Ebihara, Kenichi; Kobayashi, Masakazu*; Mayama, Tsuyoshi*; Hirayama, Kyosuke*; Shimizu, Kazuyuki*; Takeuchi, Akihisa*; Uesugi, Masayuki*
International Journal of Plasticity, 174, p.103897_1 - 103897_22, 2024/03
Times Cited Count:0Hydrogen(H) embrittlement in high-strength aluminum(Al) alloys is a crucial problem. H accumulation at the interface of precipitates in Al alloy is considered to cause embrittlement. However, there is no quantitative knowledge regarding the interaction between H distribution and stress field near cracks. In this study, using a multi-modal three-dimensional image-based simulation combining the crystal plasticity finite element method and H diffusion analysis, we tried to capture the stress distribution near the crack, its influence on the H distribution, and the probability of crack initiation in the experimental condition. As a result, it was found that grain boundary cracks transition to quasi-cleavage cracks in the region where the cohesive energy of the semi-coherent interface of MgZn precipitates decreases due to H accumulation near the tip. We believe the present simulation method successfully bridges nanoscale delamination and macroscale brittle fracture.
Yoshimoto, Masataka*; Tamura, Kazuhisa; Watanabe, Kenta*; Shimizu, Keisuke*; Horisawa, Yuhei*; Kobayashi, Takeshi*; Tsurita, Hanae*; Suzuki, Kota*; Kanno, Ryoji*; Hirayama, Masaaki*
Sustainable Energy & Fuels (Internet), 8(6), p.1236 - 1244, 2024/03
Times Cited Count:0Photo-rechargeable systems, which can efficiently convert and store solar energy into chemical energy within single devices, are essential to harness sunlight effectively. Photo-(de)intercalation plays a pivotal role in the functionality of photorechargeable systems. Nevertheless, the photo-(de)intercalation process has not been conclusively confirmed owing to potential interference from side reactions, such as the decomposition of liquid electrolytes and the elution of electrode materials. In this study, we successfully demonstrated photo-responsive Li-deintercalation using an all-solid-state thin-film battery comprised of epitaxially-grown anatase TiO doped with Nb (a-TiO:Nb) as the cathode. Under light irradiation, Li-deintercalation occurred and was subsequently reversibly intercalated into a-TiO:Nb during discharge.
Ha, Yoosung; Shimodaira, Masaki; Katsuyama, Jinya
Transactions of 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 7 Pages, 2024/03
Heat-affected zone (HAZ) produced by butt-welding in reactor pressure vessel (RPV) steel is one of the representative materials for surveillance program. The fracture toughness values of HAZ may show a large uncertainty due to inhomogeneous metallurgical structures. Also, the inhomogeneous microstructure in HAZ may influence on the degree of uncertainty in the fracture toughness and the sensitivity to irradiation embrittlement. We investigated the fracture toughness in HAZ of unirradiated material with respect to its distance from the fusion line of welds, where the amount of mixed microstructures change due to the thermal history during the welding. Mini-C(T) specimens of HAZ were harvested from the crack position at 0.5 mm, 1 mm and 2 mm from the fusion line of welds. The uncertainty of fracture toughness in HAZ, from the fusion line at 0.5 mm in particular, was larger than those of base metal at a quarter thickness. From the results of fracture toughness evaluation considering the standard deviation, there was the difference of reference temperature, in each position of HAZ. in all positions of HAZ was significantly lower than that of base metal, which means the fracture toughness in HAZ was greater than that of base metal at a quarter thickness.
Niwa, Masakazu; Shimada, Koji; Terusawa, Shuji*; Goto, Akira*; Nishiyama, Nariaki; Nakajima, Toru; Ishihara, Takanori; Hakoiwa, Hiroaki
Island Arc, 33(1), p.e12516_1 - e12516_16, 2024/02
Times Cited Count:0To investigate the geological evidence of near-surface crustal deformations in a high-strain shear zone that has been geodetically identified but not associated with clear tectonic landforms, a fieldwork was conducted in E-W trending southern Kyushu high-strain shear zone, Japan. According to our study, an investigation based on the slip data from minor faults and the occurrences of fracture zones could help to identify a concealed fault that is small in terms of size to record tectonic landforms but can trigger large earthquakes.
Ishida, Takekazu*; Vu, TheDang*; Shishido, Hiroaki*; Aizawa, Kazuya; Oku, Takayuki; Oikawa, Kenichi; Harada, Masahide; Kojima, Kenji M*; Miyajima, Shigeyuki*; Koyama, Tomio*; et al.
Journal of Low Temperature Physics, 214(3-4), p.152 - 157, 2024/02
Times Cited Count:0 Percentile:0.02(Physics, Applied)Ishikawa, Norito; Fukuda, Shoma; Nakajima, Toru; Ogawa, Hiroaki; Fujimura, Yuki; Taguchi, Tomitsugu*
Materials, 17(3), p.547_1 - 547_21, 2024/02
Times Cited Count:0 Percentile:0.04(Chemistry, Physical)Natural monoclinic zirconia (baddeleyite) was irradiated with 340-MeV Au ions, and the irradiation-induced nanostructures (i.e., ion tracks and nanohillocks) were observed using transmission electron microscopy. The diameter of the nanohillocks is approximately 10 nm, which is similar to the maximum molten region size calculated using the analytical thermal spike model. Ion tracks are imaged as strained regions that maintain their crystalline structure. The cross-sections of most of the ion tracks are imaged as parallelopiped or rectangular contrasts as large as 10 nm. These results strongly indicate that the molten region is recrystallized anisotropically, reflecting the lattice structure. Furthermore, low-density track cores are formed in the center of the ion tracks. The formation of low-density track cores can be attributed to the ejection of molten matter toward the surface.
Watanabe, Kenta*; Horisawa, Yuhei*; Yoshimoto, Masataka*; Tamura, Kazuhisa; Suzuki, Kota*; Kanno, Ryoji*; Hirayama, Masaaki*
Nano Letters, 24(6), p.1916 - 1922, 2024/02
Times Cited Count:1 Percentile:0.02(Chemistry, Multidisciplinary)Electrochemistry has extended from reactions at solid/liquid interfaces to those at solid/solid interfaces. In this study, we achieve the stable photoelectrochemical reaction at the semiconductor-electrode/solid-electrolyte interface in Nb-doped anatase-TiO (a-TiO:Nb)/LiPO (LPO)/Li all-solid-state cell. The oxidative currents of a-TiO:Nb/LPO/Li increase upon light irradiation when a-TiO:Nb is located at a potential that is more positive than its flat-band potential. The photoelectrochemical reaction at the semiconductor/solid-electrolyte interface is driven by the same principle as that at semiconductor/liquid-electrolyte interfaces. Thus, we extend photoelectrochemistry to all-solid-state systems composed of solid/solid interfaces.
Yamauchi, Hiroki; Sari, D. P.*; Yasui, Yukio*; Sakakura, Terutoshi*; Kimura, Hiroyuki*; Nakao, Akiko*; Ohara, Takashi; Honda, Takashi*; Kodama, Katsuaki; Igawa, Naoki; et al.
Physical Review Research (Internet), 6(1), p.013144_1 - 013144_9, 2024/02
Koyama, Motomichi*; Yamashita, Takayuki*; Morooka, Satoshi; Yang, Z.*; Varanasi, R. S.*; Hojo, Tomohiko*; Kawasaki, Takuro; Harjo, S.
Tetsu To Hagane, 110(3), p.205 - 216, 2024/02
Moriyama, Junichiro*; Takakuwa, Osamu*; Yamaguchi, Masatake; Ogawa, Yuhei*; Tsuzaki, Kaneaki*
Computational Materials Science, 232, p.112650_1 - 112650_11, 2024/01
Times Cited Count:0 Percentile:0(Materials Science, Multidisciplinary)The present study focuses on a novel hydrogen-improved strength-ductility balance in some practical Fe-Cr-Ni-based austenitic alloys, which directly depends on the solute hydrogen content. The hydrogen absorption energy of the Fe-Cr-Ni model alloys with the face-centered cubic structure was examined using first-principles calculations to verify the contribution of Cr and Ni substitutions from Fe to the hydrogen solubility in the alloys. The Cr substitution substantially reduced the hydrogen absorption energy compared to the Ni substitution, whereby the increased Cr/Ni ratio exerts higher hydrogen solubility. The propensity in the calculations coincided with the experimental results obtained previously in the practical alloys with various Cr / Ni ratios.
Kaneda-Nakashima, Kazuko*; Shirakami, Yoshifumi*; Kadonaga, Yuichiro*; Watabe, Tadashi*; Oe, Kazuhiro*; Yin, X.*; Haba, Hiromitsu*; Shirasaki, Kenji*; Kikunaga, Hidetoshi*; Tsukada, Kazuaki; et al.
International Journal of Molecular Sciences (Internet), 25(2), p.933_1 - 933_14, 2024/01
Times Cited Count:1 Percentile:0.01(Biochemistry & Molecular Biology)Zhou, Y.*; Song, W.*; Zhang, F.*; Wu, Y.*; Lei, Z.*; Jiao, M.*; Zhang, X.*; Dong, J.*; Zhang, Y.*; Yang, M.*; et al.
Journal of Alloys and Compounds, 971, p.172635_1 - 172635_7, 2024/01
Times Cited Count:0 Percentile:0(Chemistry, Physical)