Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kutsukake, Kenichi; Matsuda, Makoto; Nakamura, Masahiko; Ishizaki, Nobuhiro; Kabumoto, Hiroshi; Otokawa, Yoshinori; Asozu, Takuhiro; Matsui, Yutaka; Nakagawa, Sohei; Abe, Shinichi
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1080 - 1084, 2023/11
no abstracts in English
Kamiya, Junichiro; Nii, Keisuke*; Kabumoto, Hiroshi; Kondo, Yasuhiro; Tamura, Jun; Harada, Hiroyuki; Matsui, Yutaka; Matsuda, Makoto; Moriya, Katsuhiro; Ida, Yoshiaki*; et al.
e-Journal of Surface Science and Nanotechnology (Internet), 21(4), p.344 - 349, 2023/05
no abstracts in English
Kabumoto, Hiroshi; Matsuda, Makoto; Nakamura, Masahiko; Ishizaki, Nobuhiro; Kutsukake, Kenichi; Otokawa, Yoshinori; Asozu, Takuhiro; Matsui, Yutaka; Nakagawa, Sohei; Abe, Shinichi
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1109 - 1113, 2023/01
no abstracts in English
Nii, Keisuke*; Ida, Yoshiaki*; Ueda, Hideki*; Yamaguchi, Takanori*; Kabumoto, Hiroshi; Kamiya, Junichiro; Kondo, Yasuhiro; Tamura, Jun; Harada, Hiroyuki; Matsui, Yutaka; et al.
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.601 - 604, 2023/01
no abstracts in English
Iwase, Akihiro*; Fukuda, Kengo*; Saito, Yuichi*; Okamoto, Yoshihiro; Semboshi, Satoshi*; Amekura, Hiroshi*; Matsui, Toshiyuki*
Journal of Applied Physics, 132(16), p.163902_1 - 163902_10, 2022/10
Times Cited Count：0 Percentile：0(Physics, Applied)Amorphous SiO
samples were implanted with 380 keV Fe ions at room temperature. After implantation, some of the samples were irradiated with 16 MeV Au ions. magnetic properties were investigated using a SQUID magnetometer, and the morphology of the Fe-implanted SiO samples was examined using transmission electron microscopy and X-ray absorption spectroscopy (EXAFS and XANES), which showed that the size of Fe nanoparticles was increasing The size of Fe nanoparticles increased with increasing Fe implantation amount; some of the Fe nanoparticles consisted of Fe oxides, and the valence and structure of Fe atoms became closer to that of metallic 
-Fe with increasing Fe injection amount. The magnetization-field curve of the sample implanted with a small amount of Fe was reproduced by Langevin's equation, suggesting that the Fe nanoparticles behave in a superparamagnetic manner. In addition, when a large amount of Fe was implanted, the magnetization-magnetic field curve shows a ferromagnetic state. These magnetic property results are consistent with the X-ray absorption results. Subsequent 16 MeV Au irradiation crushed the Fe nanoparticles, resulting in a decrease in magnetization.
Matsuda, Makoto; Tayama, Hidekazu; Ishizaki, Nobuhiro; Kabumoto, Hiroshi; Nakamura, Masahiko; Kutsukake, Kenichi; Otokawa, Yoshinori; Asozu, Takuhiro; Matsui, Yutaka; Abe, Shinichi
Proceedings of 18th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.394 - 398, 2021/10
no abstracts in English
Nii, Keisuke*; Ida, Yoshiaki*; Ueda, Hideki*; Yamaguchi, Takanori*; Kabumoto, Hiroshi; Kamiya, Junichiro; Kondo, Yasuhiro; Tamura, Jun; Harada, Hiroyuki; Matsui, Yutaka; et al.
Proceedings of 18th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.334 - 337, 2021/10
no abstracts in English
Hirouchi, Jun; Takahara, Shogo; Komagamine, Hiroshi*; Kato, Nobuyuki*; Matsui, Yasuto*; Yoneda, Minoru*
Journal of Radiological Protection, 41(3), p.S139 - S149, 2021/09
Times Cited Count：2 Percentile：31.78(Environmental Sciences)Sheltering is one of the countermeasures for protection against radiation exposures in nuclear accidents. The effectiveness of sheltering is often expressed by the reduction factor, that is the ratio of the indoor to the outdoor cumulative radioactivity concentrations or doses. The indoor concentration is mainly controlled by the air exchange rate, penetration factor, and indoor deposition rate. The penetration factor and indoor deposition rate depend on the surface and opening materials. We investigated experimentally these parameters of I and particles. The experiment was performed in two apartment houses, three single-family houses, and chambers. The obtained penetration factor ranged 0.3 
1 for particles of 0.3 1 
m and 0.15 0.7 for I depending on the air exchange rate. The indoor deposition rate for a house room ranged 0.007 0.2 h
for particles of 0.31 m and 0.21.5 h for I depending on floor materials.
Matsuda, Makoto; Ishizaki, Nobuhiro; Tayama, Hidekazu; Kabumoto, Hiroshi; Nakamura, Masahiko; Kutsukake, Kenichi; Otokawa, Yoshinori; Asozu, Takuhiro; Matsui, Yutaka; Abe, Shinichi; et al.
Proceedings of 17th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.948 - 952, 2020/09
no abstracts in English
Matsuda, Makoto; Osa, Akihiko; Ishizaki, Nobuhiro; Tayama, Hidekazu; Kabumoto, Hiroshi; Nakamura, Masahiko; Kutsukake, Kenichi; Otokawa, Yoshinori; Asozu, Takuhiro; Matsui, Yutaka; et al.
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1270 - 1273, 2019/07
The JAEA-Tokai tandem accelerator was operated over a total of 138 days, and delivered 16 different ions to the experiments in the research fields of nuclear physics, nuclear chemistry, atomic physics, solid state physics and radiation effects in material in FY2018. Maximum acceleration voltage was 16.6 MV. A new beam attenuator was installed at the entrance beam line of the tandem accelerator to facilitate control of the beam current and minimize stripper foil consumption. The main maintenance items included replacing the pellet chain used for about 68,000 hours and the drive motor for the high voltage terminal generator used for about 9 years. A fault has occurred in the building's oxygen deficiency monitor. This paper describes the operational status of the accelerators and the major technical developments of our facility.
Matsuda, Makoto; Kabumoto, Hiroshi; Tayama, Hidekazu; Nakanoya, Takamitsu; Nakamura, Masahiko; Kutsukake, Kenichi; Otokawa, Yoshinori; Asozu, Takuhiro; Matsui, Yutaka; Ishizaki, Nobuhiro; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1271 - 1275, 2018/08
The JAEA-Tokai tandem accelerator was operated over a total of 64 days, and delivered 13 different ions to the experiments in the research fields of nuclear physics, nuclear chemistry, atomic physics, solid state physics and radiation effects in material in FY2017. After the vacuum accident occurred in December 2016 the accelerating voltage dropped to 12 MV. In order to remove dust and broken carbon foil in the accelerating tube, all 80 accelerator tubes were removed and rewashed. It took 4 months for cleaning and 2 months for reassembly. Therefore about 10 months were a maintenance period of an accelerator from February 2017. Along with the reconstruction of the accelerating tube, re-alignment of the accelerating tube was carried out. The operation resumed in December 2017 and it was possible to recover the maximum voltage to 17.4 MV without beam and 16.6 MV with beam with periodic conditioning work.
Nakano, Hiroko; Shibata, Hiroshi; Takeuchi, Tomoaki; Matsui, Yoshinori; Tsuchiya, Kunihiko
Proceedings of International Conference on Asia-Pacific Conference on Fracture and Strength 2016 (APCFS 2016) (USB Flash Drive), p.283 - 284, 2016/09
no abstracts in English
Nakano, Hiroko; Uehara, Toshiaki; Takeuchi, Tomoaki; Shibata, Hiroshi; Nakamura, Jinichi; Matsui, Yoshinori; Tsuchiya, Kunihiko
JAEA-Technology 2015-049, 61 Pages, 2016/03
JAEA-Technology-2015-049.pdf:14.7MB
In Japan Atomic Energy Agency, we started a research and development so as to monitor the Nuclear Plant Facilities situations during a severe accident, such as a radiation-resistant monitoring camera under a severe accident, a radiation resistant in-water transmission system for conveying the information in-core and a heat-resistant signal cable. As part of advance in a heat-resistant signal cable, we maintained to ex-core high-temperature and pressure water loop test equipment which can be simulated conditions of BWRs and PWRs for evaluation reliability and property of construction sheath materials. This equipment consists of Autoclave, water conditioning tank, water pump, high-pressure metering pump, preheater, heat exchanger and pure water purification equipment. This report describes the basic design and the results of performance tests of construction machinery and tools of ex-core high-temperature and pressure water loop test equipment.
Xu, Z.*; Yamachi, Hiroshi*; Sato, Toshinori; Matsui, Hiroya; Itakura, Kenichi*
Doboku Gakkai Rombunshu, F3 (Doboku Johogaku) (Internet), 71(1), p.43 - 55, 2015/10
In the process of underground space development, enormous information is collected in each developing stage, such as investigation, plan, design and construction. It is important to properly feed back these information to design and construction in order to realize rational design and construction of an underground space. And more, these information also become basic data in a plane of structure management. However, it is almost impossible that it is controlled in the individual ability, since collected information quantity is too enormous. For the purpose of intuitively controlling and processing these enormous information, we devised the system for the data management by freely moving in virtual reality space. In this paper, the basic structure of the system constructed by adopting WEB3D and RDBMS, is described, and the practicability is verified.
Takeuchi, Tomoaki; Otsuka, Noriaki; Shibata, Hiroshi; Nagata, Hiroshi; Endo, Yasuichi; Matsui, Yoshinori; Tsuchiya, Kunihiko
KAERI/GP-418/2015, p.110 - 112, 2015/00
irradiation experiments with a 
Co source were carried out for developing Self-Powered Gamma Detectors (SPGDs) with lead (Pb) emitter and Self-Powered Neutron Detectors (SPNDs) with Pt-40%Rh emitter prior to in-core irradiation experiments. The results showed the output currents of the SPGDs were proportional to the dose rate in the range from about 200-6000 Gy/h with about 10% accuracy. In the case of SPNDs, the output currents flowed in inverse direction and were an order of magnitude lower compared with that of the SPGDs. These different behaviors of the output currents are considered to be caused by the difference in the emitter sizes and the current component originated at the MI cables.
Kitagishi, Shigeru; Endo, Yasuichi; Okada, Yuji; Hanawa, Hiroshi; Matsui, Yoshinori
UTNL-R-0486, p.7_1 - 7_10, 2014/03
no abstracts in English
Takeuchi, Tomoaki; Shibata, Akira; Nagata, Hiroshi; Kimura, Nobuaki; Otsuka, Noriaki; Saito, Takashi; Nakamura, Jinichi; Matsui, Yoshinori; Tsuchiya, Kunihiko
Proceedings of 3rd Asian Symposium on Material Testing Reactors (ASMTR 2013), p.52 - 58, 2013/11
In-pile instrumentation systems in present LWR's are indispensable to monitor all situations during reactor operation and reactor shut down. However, those systems did not work sufficiently under the conditions like as the severe accident at the Fukushima Dai-Ichi Nuclear Power Station. Therefore, based on the irradiation measurement technique of experiences accumulated in JMTR, the developments of reactor instrumentation systems to prevent severe core damage accident in advance have been started. The development objects are four instrumentation systems, which are a solid electrolysis type hydrogen concentration sensor, a water gauge of thermocouple type equipped with the heater, a -ray detector of self-powered type SPGD, and an image analysis system of Cherenkov light for quantification of in-reactor information by CCD cameras. After the developments, the in-pile verification tests of four instrumentation systems are planned at the JMTR.
CaSteppenbeck, D.*; Takeuchi, Satoshi*; Aoi, Nori*; Doornenbal, P.*; Matsushita, Masafumi*; Wang, H.*; Baba, Hidetada*; Fukuda, Naoki*; Go, Shintaro*; Homma, Michio*; et al.
Nature, 502(7470), p.207 - 210, 2013/10
Times Cited Count：285 Percentile：99.78(Multidisciplinary Sciences)no abstracts in English
Takeuchi, Tomoaki; Ueno, Shunji; Komanome, Hirohisa*; Otsuka, Noriaki; Shibata, Hiroshi; Kimura, Nobuaki; Matsui, Yoshinori; Tsuchiya, Kunihiko; Araki, Masanori
Proceedings of 6th International Symposium on Material Testing Reactors (ISMTR-6) (Internet), 7 Pages, 2013/10
During the station blackout situation at the Fukushima Dai-ichi (1F) Nuclear Power Plant, conventional in-pile instrumentation systems did not work sufficiently, resulting in the progress of the severe accident. In June 2011, the Japanese government referred to "Enhancement of instrumentation to identify the status of the reactors and PCVs" as a lesson of the accident at the 1F NPP, in the report of Japanese government to the IAEA ministerial conference in accordance with such situation, we started from 2012 a research and development which corresponds to the provisions so as to monitor the NPPs situations during a severe accident. In this research and development, we have been building of technical bases of a radiation-resistant high-definition and high-sensitivity monitoring camera, a wireless transmission system, and radiation- and heat-resistant signal line. The objective and latest progress situations of the R&D including the results of the characteristic experiments will be introduced in this symposium.
Soma, Nobukazu*; Oikawa, Yasuki*; Hirano, Toru*; Matsui, Hiroya; Asanuma, Hiroshi*
Butsuri Tansa, 66(2), p.69 - 83, 2013/04
We have studied a reflection imaging technique in which passive seismic signals from other construction activity such as drilling noise are used as a wave source in order to develop a low-cost measurement method inside underground gallery. In this paper, we show an application to data sets from Mizunami Underground Research Laboratory of Japan Atomic Energy Agency. The drilling was conducted with a main purpose of extraction rock core samples for rock mechanics research. The three-dimensional reflection imaging results and comparison with well observation are shown in this paper.
