Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
compoundsFrazer, D.*; Saleh, T. A.*; Matsumoto, Taku; Hirooka, Shun; Kato, Masato; McClellan, K.*; White, J. T.*
Nuclear Engineering and Design, 423, p.113136_1 - 113136_7, 2024/07
Nanoindentation based techniques can be employed on minute volumes of material to measure mechanical properties, including Young's modulus, hardness, and creep stress exponents. In this study, (U,Ce)O solid solutions samples are used to develop elevated temperature nanoindentation and nanoindentation creep testing methods for use on mixed oxide fuels. Nanoindentation testing was performed on 3 separate (Ux-1,Cex)O compounds ranging from x equals 0.1 to 0.3 at up to 800 
C: their Young's modulus, hardness, and creep stress exponents were evaluated. The Young's modulus decreases in the expected linear manner while the hardness decreases in the expected exponential manner. The nanoindentation creep experiments at 800 C give stress exponent values, n=4.7-6.9, that suggests dislocation motion as the deformation mechanism.
Nakamura, Keita; Hanari, Toshihide; Matsumoto, Taku; Kawabata, Kuniaki; Yashiro, Hiroshi*
Journal of Robotics and Mechatronics, 36(1), p.115 - 124, 2024/02
mixed oxidesVauchy, R.; Matsumoto, Taku; Hirooka, Shun; Uno, Hiroki*; Tamura, Tetsuya*; Arima, Tatsumi*; Inagaki, Yaohiro*; Idemitsu, Kazuya*; Nakamura, Hiroki; Machida, Masahiko; et al.
Journal of Nuclear Materials, 588, p.154786_1 - 154786_13, 2024/01
Times Cited Count：1 Percentile：72.91(Materials Science, Multidisciplinary)Baba, Keita*; Watanobe, Yutaka*; Nakamura, Keita*; Matsumoto, Taku; Hanari, Toshihide; Kawabata, Kuniaki
Proceedings of 29th International Symposium on Artificial Life and Robotics (AROB 2024) (Internet), p.751 - 756, 2024/01
Matsumoto, Taku; Hanari, Toshihide; Kawabata, Kuniaki; Yashiro, Hiroshi*; Nakamura, Keita*
Proceedings of 2023 IEEE International Conference on Robotics and Biomimetics (IEEE ROBIO 2023) (Internet), 7 Pages, 2023/12
Wang, Z.; Matsumoto, Toshinori; Duan, G.*; Matsunaga, Takuya*
Computer Methods in Applied Mechanics and Engineering, 414, p.116168_1 - 116168_49, 2023/09
Times Cited Count：3 Percentile：89.18(Engineering, Multidisciplinary)Matsumoto, Taku; Hanari, Toshihide; Kawabata, Kuniaki; Yashiro, Hiroshi*; Nakamura, Keita*
Proceedings of 22nd World Congress of the International Federation of Automatic Control (IFAC 2023) (Internet) , p.12107 - 12112, 2023/07
Hirooka, Shun; Nakamichi, Shinya; Matsumoto, Taku; Tsuchimochi, Ryota; Murakami, Tatsutoshi
Frontiers in Nuclear Engineering (Internet), 2, p.1119567_1 - 1119567_7, 2023/03
Storage of plutonium (Pu)-containing materials requires extremely strict attention in terms of physical safety and material accounting. Despite the emphasized importance of storage management, only a few reports are available in the public, e.g., experience in PuO storage in the UK and safety standards in the storage of Pu-containing materials in the US. Japan also stores more U-Pu mixed oxide (MOX) mostly in powder form. Adopting an appropriate storage management is necessary depending on the characteristics of MOX items such as raw powder obtained by reprocessing of spent Light Water Reactor fuels, research and development on the remains of fuel fabrication, which can contain organic materials, and dry-recycled powder during fuel fabrication. Stagnation in fuel fabrications and experience in degradation of MOX containers during extended period of storage have led to the review of the storage method in the Plutonium Fuel Development Center in Japan Atomic Energy Agency. The present work discusses the various nuclear materials, storage methods, experience in degradation of containers that occur during storage, and strategies for future long-term storage.
Shimada, Mikio*; Tokumiya, Takumi*; Miyake, Tomoko*; Tsukada, Kaima*; Kanzaki, Norie; Yanagihara, Hiromi*; Kobayashi, Junya*; Matsumoto, Yoshihisa*
Journal of Radiation Research (Internet), 64(2), p.345 - 351, 2023/03
Times Cited Count：0 Percentile：0.01(Biology)Matsumoto, Taku; Hanari, Toshihide; Kawabata, Kuniaki; Yashiro, Hiroshi*; Nakamura, Keita*
Proceedings of 28th International Symposium on Artificial Life and Robotics (AROB 28th 2023) (Internet), p.768 - 773, 2023/01
Vauchy, R.; Hirooka, Shun; Matsumoto, Taku; Kato, Masato
Frontiers in Nuclear Engineering (Internet), 1, p.1060218_1 - 1060218_18, 2022/12
Kato, Masato; Machida, Masahiko; Hirooka, Shun; Nakamichi, Shinya; Ikusawa, Yoshihisa; Nakamura, Hiroki; Kobayashi, Keita; Ozawa, Takayuki; Maeda, Koji; Sasaki, Shinji; et al.
Materials Science and Fuel Technologies of Uranium and Plutonium mixed Oxide, 171 Pages, 2022/10
Innovative and advanced nuclear reactors using plutonium fuel has been developed in each country. In order to develop a new nuclear fuel, irradiation tests are indispensable, and it is necessary to demonstrate the performance and safety of nuclear fuels. If we can develop a technology that accurately simulates irradiation behavior as a technology that complements the irradiation test, the cost, time, and labor involved in nuclear fuel research and development will be greatly reduced. And safety and reliability can be significantly improved through simulation of nuclear fuel irradiation behavior. In order to evaluate the performance of nuclear fuel, it is necessary to know the physical and chemical properties of the fuel at high temperatures. And it is indispensable to develop a behavior model that describes various phenomena that occur during irradiation. In previous research and development, empirical methods with fitting parameters have been used in many parts of model development. However, empirical techniques can give very different results in areas where there is no data. Therefore, the purpose of this study is to construct a scientific descriptive model that can extrapolate the basic characteristics of fuel to the composition and temperature, and to develop an irradiation behavior analysis code to which the model is applied.
Furuta, Takuya; Koba, Yusuke*; Hashimoto, Shintaro; Chang, W.*; Yonai, Shunsuke*; Matsumoto, Shinnosuke*; Ishikawa, Akihisa*; Sato, Tatsuhiko
Physics in Medicine & Biology, 67(14), p.145002_1 - 145002_15, 2022/07
Times Cited Count：2 Percentile：47.19(Engineering, Biomedical)Carbon ion radiotherapy has an advantage over conventional radiotherapy such that its superior dose concentration on the tumor helps to reduce unwanted dose to surrounding normal tissues. Nevertheless, a little dose to normal tissues, which is a potential risk of secondary cancer, is still unavoidable. The Monte Carlo simulation is a good candidate for the tool to assess secondary cancer risk, including the contributions of secondary particles produced by nuclear reactions. We therefore developed a new dose reconstruction system implementing PHITS as the engine. In this system, the PHITS input is automatically created from the DICOM data sets recorded in the treatment planning. The developed system was validated by comparing to experimental dose distribution in water and treatment plan on an anthropomorphic phantom. This system will be used for retrospective studies using the patient data in National Institute for Quantum and Science and Technology.
with Pu = 0.45 and 0.68 and related defect formation energyHirooka, Shun; Matsumoto, Taku; Sunaoshi, Takeo*; Hino, Tetsushi*
Journal of Nuclear Materials, 558, p.153375_1 - 153375_8, 2022/01
Times Cited Count：2 Percentile：31.78(Materials Science, Multidisciplinary)no abstracts in English
Chang, W.*; Koba, Yusuke*; Furuta, Takuya; Yonai, Shunsuke*; Hashimoto, Shintaro; Matsumoto, Shinnosuke*; Sato, Tatsuhiko
Journal of Radiation Research (Internet), 62(5), p.846 - 855, 2021/09
Times Cited Count：2 Percentile：26.61(Biology)With the aim of developing a revaluation tool of treatment plan in carbon-ion radiotherapy using Monte Carlo (MC) simulation, we propose two methods; one is dedicated to identify realistic-tissue materials from a CT image with satisfying the well-calibrated relationship between CT numbers and stopping power ratio (SPR) provided by TPS, and the other is to estimate dose to water considering the particle- and energy-dependent SPR between realistic tissue materials and water. We validated these proposed methods by computing depth dose distribution in homogeneous and heterogeneous phantoms composed of human tissue materials and water irradiated by a 400 MeV/u carbon beam with 8 cm SOBP using a MC simulation code PHITS and comparing with results of conventional treatment planning system (TPS). Our result suggested that use of water as a surrogate of real tissue materials, which is adopted in conventional TPS, is inadequate for dose estimation from secondary particles because their production rates cannot be scaled by SPR of the primary particle in water. We therefore concluded that the proposed methods can play important roles in the reevaluation of the treatment plans in carbon-ion radiotherapy.
Suzuki, Shintaro*; Takubo, Ko*; Kuga, Kentaro*; Higemoto, Wataru; Ito, Takashi; Tomita, Takahiro*; Shimura, Yasumichi*; Matsumoto, Yosuke*; Bareille, C.*; Wadachi, Hiroki*; et al.
Physical Review Research (Internet), 3(2), p.023140_1 - 023140_12, 2021/05
We report our experimental discovery of the transition temperature reaching 20 K in a Yb-based compound at ambient pressure. The Mn substitution at the Al site in an intermediate valence state of 
-YbAlB
not only induces antiferromagnetic transition at a record high temperature of 20 K but also transforms the heavy-fermion liquid state in -YbAlB into a highly resistive metallic state proximate to a Kondo insulator.
and (U,Pu,Am,Np)OHirooka, Shun; Matsumoto, Taku; Kato, Masato; Sunaoshi, Takeo*; Uno, Hiroki*; Yamada, Tadahisa*
Journal of Nuclear Materials, 542, p.152424_1 - 152424_9, 2020/12
Times Cited Count：6 Percentile：60.71(Materials Science, Multidisciplinary)The measurement of oxygen potential was conducted at 1,673, 1,773, and 1,873 K for (U
Pu
Am
)O and at 1,873 and 1,923 K for (U
Pu
Am
Np
)O by using a thermo-gravimeter and an oxygen sensor. Am inclusion in terms of substituting the U significantly increased the oxygen potential. Similarly, the inclusion of Np as a substitute for U increased the oxygen potential; however, the effect was not as large as that with the Pu or Am addition at the same rate. The results were analyzed via defect chemistry and certain defect formations were suggested in the reducing region and the near-stoichiometric region by plotting the relationship between PO and the deviation from the stoichiometry. The equilibrium constants of the defect reactions were arranged to reproduce the experiment such that Am/Np contents were included in the entropy with coefficients fitting the experimental data.
Watanabe, Masashi; Matsumoto, Taku; Hirooka, Shun; Morimoto, Kyoichi; Kato, Masato
2018 GIF Symposium Proceedings (Internet), p.315 - 320, 2020/05
Recently, a research group studying at Plutonium Fuel Development Facility (PFDF) in Japan Atomic Energy Agency has systematically measured vast amounts of physical properties in the non-stoichiometric (U, Pu)O. Lattice parameter, elastic modulus, thermal expansion, oxygen potential, oxygen chemical diffusion coefficient and thermal conductivity were successfully measured as function of Pu content, O/M ratio and temperature, and the effects of Pu content and O/M ratio on their physical properties were evaluated. In this work, those experimental data are reviewed, and latest experimental data set on the non-stoichiometric (U, Pu)O are presented. The data set would be available in development of a fuel performance code.
Oikawa, Kenichi; Kiyanagi, Yoshiaki*; Sato, Hirotaka*; Omae, Kazuma*; Pham, A.*; Watanabe, Kenichi*; Matsumoto, Yoshihiro*; Shinohara, Takenao; Kai, Tetsuya; Harjo, S.; et al.
Materials Research Proceedings, Vol.15, p.207 - 213, 2020/02
-humate complexesMarumo, Kazuki*; Matsumoto, Atsumasa*; Nakano, Sumika*; Shibukawa, Masami*; Saito, Takumi*; Haraga, Tomoko; Saito, Shingo*
Environmental Science & Technology, 53(24), p.14507 - 14515, 2019/12
Times Cited Count：7 Percentile：29.01(Engineering, Environmental)Humic acids (HA) are responsible for the fate of metal ions in the environment. We developed a polyacrylamide gel electrophoresis (PAGE) technique to investigate the MW distributions of metal ion (copper ion). Combining contaminant-metal-free and high-resolution PAGE systems for HA provided accurate MW distributions for the metal ions. Coupling this system with UV-Vis spectrometry and the excitation-emission matrix (EEM) spectrometry-parallel factor analysis (PARAFAC) method revealed new insights into metal-HA complex. Interestingly, the MW distributions of the three metal ions were entirely different, indicating that the presence of specific binding environments in HA for the metal ions depending its MW. The MW distributions of five fluorescent components were associated with the metal ion distributions. Our PAGE-based methodology suggests that metal binding sites and fluorescent components in HA exhibit heterogeneity in terms of metal binding affinity and MW.
