Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Miyahara, Naoya; Miwa, Shuhei; Gou
llo, M.*; Imoto, Jumpei; Horiguchi, Naoki; Sato, Isamu*; Osaka, Masahiko
Journal of Nuclear Science and Technology, 57(12), p.1287 - 1296, 2020/12
Times Cited Count：5 Percentile：53.85(Nuclear Science & Technology)In order to clarify the cesium iodide (CsI) transport behavior with a focus on the mechanisms of gaseous iodine formation in the reactor coolant system of LWR under a severe accident condition, a reproductive experiment of CsI transport behavior was conducted using a facility equipped with a thermal gradient tube. Various analyses on deposits and airborne materials during transportation could elucidate two mechanisms for the gaseous iodine formation. One was the gaseous phase chemical reaction in Cs-I-O-H system at relatively high-temperature region, which led to gaseous iodine transport to the lower temperature region without any further changes in gas species due to the kinetics limitation effects. The other one was the chemical reactions related to condensed phase of CsI, namely those of CsI deposits on walls with surface of stainless steel to form Cs
CrO
compound and CsI aerosol particles with steam, which were newly found in this study.
Miwa, Shuhei; Nakajima, Kunihisa; Miyahara, Naoya; Nishioka, Shunichiro; Suzuki, Eriko; Horiguchi, Naoki; Liu, J.; Miradji, F.; Imoto, Jumpei; Afiqa, B. M.; et al.
Mechanical Engineering Journal (Internet), 7(3), p.19-00537_1 - 19-00537_11, 2020/06
We constructed the fission product (FP) chemistry database named ECUME for LWR severe accident. This version of ECUME is equipped with dataset of the chemical reactions and their kinetics constants for the reactions of cesium(Cs)-iodine(I)-boron(B)-molybdenum(Mo)-oxygen(O)-hydrogen(H) system in gas phase, the elemental model for the high temperature chemical reaction of Cs with stainless steel applied as the structural material in a reactor, and thermodynamic data for CsBO vapor species and solids of CsSiO
and CsFeSiO for these chemical reactions. The ECUME will provide estimation of Cs distribution due to the evaluation of effects of interaction with BWR control material B and stainless steel on Cs behavior in the Fukushima Daiichi Nuclear Power Station.
Miwa, Shuhei; Takase, Gaku; Imoto, Jumpei; Nishioka, Shunichiro; Miyahara, Naoya; Osaka, Masahiko
Journal of Nuclear Science and Technology, 57(3), p.291 - 300, 2020/03
Times Cited Count：7 Percentile：55.67(Nuclear Science & Technology)For the evaluation of transport behavior of control material boron in a severe accident of BWR from the viewpoint of chemical effects on cesium and iodine behavior, boron chemistry during transportation in the high temperature region above 400 K was experimentally investigated. The heating tests of boron oxide specimen were conducted using the dedicated experimental apparatus reproducing fission product release and transport in steam atmosphere. Released boron oxide vapor was deposited above 1,000 K by the condensation onto stainless steel. The boron deposits and/or vapors significantly reacted with stainless steel above 1,000 K and formed the stable iron-boron mixed oxide (FeO)BO
. These results indicate that released boron from degraded BWR control blade in a severe accident could remain in the high temperature region such as a Reactor Pressure Vessel. Based on these results, it can be said that the existence of boron deposits in the high temperature region would decrease the amount of transported cesium vapors from a Reactor Pressure Vessel due to possible formation of low volatile cesium borate compounds by the reaction of boron deposits with cesium vapors.
Liu, J.; Miyahara, Naoya; Miwa, Shuhei; Takano, Masahide; Hidaka, Akihide; Osaka, Masahiko
Journal of Nuclear Materials, 527, p.151819_1 - 151819_7, 2019/12
Times Cited Count：2 Percentile：21.58(Materials Science, Multidisciplinary)To evaluate the effect of each constituent element on the evaporation rate of ruthenium (Ru) from fission-produced alloy precipitates, the oxidation and evaporation behaviors of metallic Ru, molybdenum (Mo), palladium (Pd), rhodium (Rh) and Mo-Ru-Pd-Rh alloy powders were investigated by thermogravimetric analysis under oxidizing atmospheres from 1473 to 1723 K. The findings led to the following conclusions: (1) The quick oxidation of Mo into condensed Mo oxides can effectively suppress the oxidation and evaporation of Ru in alloy powders; (2) After the complete evaporation of Mo, the evaporation loss rate of Ru would be directly influenced by the Ru activity in the Ru-Pd-Rh alloys, which is determined by the composition of alloys.
Miyahara, Shinya*; Ohdaira, Naoya*; Arita, Yuji*; Maekawa, Fujio; Matsuda, Hiroki; Sasa, Toshinobu; Meigo, Shinichiro
Nuclear Engineering and Design, 352, p.110192_1 - 110192_8, 2019/10
Times Cited Count：5 Percentile：48.99(Nuclear Science & Technology)Lead-Bismuth Eutectic (LBE) is used as a spallation neutron target and coolant materials of Accelerator Driven System (ADS), and many kinds of elements are produced as spallation products. It is important to evaluate the release and transport behavior of the spallation products in the LBE. The inventories and the physicochemical composition of the spallation products produced in LBE have been investigated for an LBE loop in the ADS Target Test Facility (TEF-T) in J-PARC. The inventories of the spallation products in the LBE were estimated using the PHITS code. The physicochemical composition of the spallation products in the LBE was calculated using the Thermo-Calc code under the conditions of the operation temperatures of LBE from 350
C to 500C and the oxygen concentrations in LBE from 10 ppb to 1 ppm. The calculation showed that the 5 elements of Rb, Tl, Tc, Os, Ir, Pt, Au and Hg were soluble in LBE under the all given conditions and any kinds of compound were not formed in LBE. It was suggested that the oxides of Ce, Sr, Zr and Y were stable as CeO, SrO, ZrO and YO in the LBE.
Miwa, Shuhei; Miyahara, Naoya; Nakajima, Kunihisa; Nishioka, Shunichiro; Suzuki, Eriko; Horiguchi, Naoki; Liu, J.; Miradji, F.; Imoto, Jumpei; Afiqa, B. M.; et al.
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05
We constructed the first version of fission product (FP) chemistry database named ECUME for LWR severe accident. The first version of ECUME is equipped with dataset of the chemical reactions and their kinetics constants for the reactions of cesium(Cs)-iodine(I)-boron(B)-molybdenum(Mo)-oxygen(O)-hydrogen(H) system in gas phase, the elemental model for the high temperature chemical reaction of Cs with stainless steel, and thermodynamic data for CsBO vapor species and solids of CsSiO and CsFeSiO. The ECUME will provide more accurate estimation of Cs distribution due to the evaluation of effects of interaction with BWR control material B and stainless steel on Cs behavior in the Fukushima Daiichi Nuclear Power Station.
Horiguchi, Naoki; Miyahara, Naoya; Uesawa, Shinichiro; Yoshida, Hiroyuki; Osaka, Masahiko
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05
For source term evaluation from reactor buildings (RBs) in LWR severe accidents, we have launched to develop an evaluation method of FP aerosol particle deposition onto surfaces of internal structures in an RB based on computational fluid dynamics (CFD). This paper describes development of a CFD simulation tool as the base part of the evaluation method. A preliminary simulation for a representative RB under a representative flow condition was conducted to confirm the tool performance by roughly grasping the deposition behaviors of FP aerosol particle and decontamination factor (DF) in the RB. Calculation results showed that most of aerosol particles were deposited along with gas flow formed by the internal structures in the RB, demonstrating the advantageous feature of the present CFD tool. The DFs from 4 to 14 were obtained with increase of the particle diameters from 0.1 to 10 
m as expected in terms of the particle movement equation.
Uesawa, Shinichiro; Miyahara, Naoya; Horiguchi, Naoki; Yoshida, Hiroyuki; Osaka, Masahiko
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 5 Pages, 2019/05
Miyahara, Naoya; Miwa, Shuhei; Horiguchi, Naoki; Sato, Isamu*; Osaka, Masahiko
Journal of Nuclear Science and Technology, 56(2), p.228 - 240, 2019/02
Times Cited Count：7 Percentile：61.94(Nuclear Science & Technology)In order to improve LWR source term under severe accident conditions, the first version of a fission product (FP) chemistry database named "ECUME" was developed. The ECUME is intended to include major chemical reactions and their effective kinetic constants for representative SA sequences. It is expected that the ECUME can serve as a fundamental basis from which FP chemical models in the SA analysis codes can be elaborated. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate FP chemistry in Cs-I-B-Mo-O-H system under LWA SA conditions.
Yoshida, Hiroyuki; Uesawa, Shinichiro; Horiguchi, Naoki; Miyahara, Naoya; Ose, Yasuo*
Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 6 Pages, 2018/11
Nakajima, Kunihisa; Suzuki, Eriko; Miyahara, Naoya; Osaka, Masahiko
Progress in Nuclear Science and Technology (Internet), 5, p.168 - 170, 2018/11
Chemical interaction between cesium (Cs) vapor and stainless steel (SS) surface known as chemisorption can cause a significant amount of Cs retention on the inner surfaces within the reactor pressure vessel during a light water reactor severe accident (SA). Although the chemisorption is known to be influenced with temperature and atmosphere, their dependancies are not yet fully understood. Therefore, the Cs chemisorption behaviours under mixed gases of steam and hydrogen were experimentally examined to contribute to a better understanding of the chemisorption behaviours under various atmospheres experienced during the SA at the Fukushima Daiichi Nuclear Power Station. As a result, it was found that the deposited amounts of Cs onto the SS in the steam-containing atmosphere were much higher than those in the no steam atmosphere. It was considered that Cs revaporization from a chemisorbed product was one of the reasons why the deposited amounts under the reducing atmosphere decreased.
Yoshida, Hiroyuki; Uesawa, Shinichiro; Horiguchi, Naoki; Miyahara, Naoya; Ose, Yasuo*
Dai-23-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (USB Flash Drive), 5 Pages, 2018/06
no abstracts in English
Uesawa, Shinichiro; Horiguchi, Naoki; Miyahara, Naoya; Yoshida, Hiroyuki
Dai-23-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (USB Flash Drive), 5 Pages, 2018/06
no abstracts in English
Miyahara, Naoya; Miwa, Shuhei; Nakajima, Kunihisa; Osaka, Masahiko
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 9 Pages, 2017/09
This paper presents the development of a reproductive experimental setup for FP release and transport and an analysis tool considering chemical reaction kinetics for the construction of the FP chemistry database. The performance test of the reproductive experimental setup TeRRa using CsI compounds show that TeRRa can reproduce well a FP chemistry-related behavior such as aerosol formation, growth and deposition behavior. An analytical tool has been developed based on the commercial ANSYS-FLUENT code. Some additional models was added to evaluate detailed FP chemistry during release and transport in this study. A test analysis simulating the CsI heating test in steam atmosphere was carried out to demonstrate the performance of the improved code. The result shows the appropriateness of the additional models.
Osaka, Masahiko; Nakajima, Kunihisa; Miwa, Shuhei; Di Lemma, F. G.*; Miyahara, Naoya; Suzuki, Chikashi; Suzuki, Eriko; Okane, Tetsuo; Kobata, Masaaki
Proceedings of 8th European Review Meeting on Severe Accident Research (ERMSAR 2017) (Internet), 11 Pages, 2017/05
Fundamental research on fission product (FP) chemistry is underway at Japan Atomic Energy Agency. The purpose is to establish a FP chemistry database in each region of a LWR under severe accident conditions. Improvement of FP chemical models based on this database is also an important task of the research. Research outputs are reflected to the research and development of decommissioning of Fukushima Daiichi Nuclear Power Station (1F) and the enhancement of LWR safety. Four research items have thus been established considering the specific issues of 1F and the priority in the source term research area, as follows: - Effects of boron (B) release kinetics and thermal-hydraulic conditions on FP behavior, - Cesium (Cs) chemisorption and reactions with structural materials, - Establishment of a thermodynamic and thermophysical properties database for FP compounds, - Development of experimental and analytical techniques for the reproduction of FP behavior. In this paper, results and progress of the research are presented.
Osaka, Masahiko; Miwa, Shuhei; Nakajima, Kunihisa; Di Lemma, F. G.*; Suzuki, Chikashi; Miyahara, Naoya; Kobata, Masaaki; Okane, Tetsuo; Suzuki, Eriko
JAEA-Review 2016-026, 32 Pages, 2016/12
JAEA-Review-2016-026.pdf:6.18MB
A fundamental research program on fission product (FP) chemistry has started since 2012 for the purpose of establishment of a FP chemistry database in each region of LWR under severe accident and improvement of FP chemical models based on the database. Research outputs are reflected as fundamental knowledge to both the research and development of decommissioning of Fukushima Daiichi Nuclear Power Station (1F) and enhancement of LWR safety. Four research items have thus been established considering the specific issues of 1F and the priority in the source term research area, as follows: effects of boron (B) release kinetics and thermal-hydraulic conditions on FP behavior, cesium (Cs) chemisorption and reactions with structural materials, enlargement of a thermodynamic and thermophysical properties database for FP compounds and development of experimental and analytical techniques for the reproduction of FP behavior and for direct measurement methods of chemical form of FP compounds. In this report, the research results and progress for the year 2015 are described. The main accomplishment was the installation of a reproductive test facility for FP release and transport behavior. Moreover, basic knowledge about the Cs chemisorption behavior was also obtained. In addition to the four research items, a further research item is being considered for deeper interpretation of FP behavior by the analysis of samples outside of the 1F units.
Miwa, Shuhei; Miyahara, Naoya; Suzuki, Eriko; Nakajima, Kunihisa; Osaka, Masahiko
no journal, ,
The effects of atmosphere on the release and transport behavior of strontium (Sr) in the light water reactor severe accident (SA) was discussed based on the results calculated by release model which can evaluate the influence of atmosphere and the chemical equilibrium calculation. Under the steam starvation atmosphere condition, there is possibility that non-volatile Sr in the steam atmosphere is significantly released from fuel, while the amount of transport into the primary containment vessel is suppressed.
Miyahara, Naoya; Miwa, Shuhei; Takada, Juntaro; Osaka, Masahiko
no journal, ,
A test facility for the reproduction of fission poroduct release and transport under a severe accident condition has been developed. It was confirmed that not only deposited but also airborne materials in the farnace of this facility under temperature condition of severe accident (1000 - 400 K at reactor coolant system) can be subjected to various analyses by measuring aerosol size distribution of airborne CsI aerosol.
Osaka, Masahiko; Nakajima, Kunihisa; Miwa, Shuhei; Miyahara, Naoya; Suzuki, Eriko; Suzuki, Chikashi; Horiguchi, Naoki; Imoto, Jumpei; Liu, J.; Nishioka, Shunichiro; et al.
no journal, ,
Fundamental research on fission product (FP) chemistry is underway at Japan Atomic Energy Agency. The purpose is to establish a FP chemistry database in each region of a LWR under severe accident conditions. Improvement of FP chemical models based on this database is also an important task of the research. Research outputs are reflected to the research and development of decommissioning of Fukushima Daiichi Nuclear Power Station (1F) and the enhancement of LWR safety. Four research items have thus been established considering the specific issues of 1F and the priority in the source term research area, as follows: - Effects of boron (B) release kinetics and thermal-hydraulic conditions on FP behavior, - Cesium (Cs) chemisorption and reactions with structural materials, - Establishment of a thermodynamic and thermophysical properties database for FP compounds, - Development of experimental and analytical techniques for the reproduction of FP behavior. In this paper, results and progress of the research are presented.
Horiguchi, Naoki; Miyahara, Naoya; Miwa, Shuhei; Osaka, Masahiko
no journal, ,
To evaluate chemical behavior of Iodine and Cesium at reactor cooling system in Boron containing environment derived from BWR control materials, a chemical analysis considering chemical reaction kinetic was conducted. Analytical results were compared with those by a chemical equilibrium calculation. It was found that mole fractions of main Cesium compound CsBO were different between those calculated with and without chemical reaction kinetics in a lower temperature condition. This result indicates the necessity of consideration of the chemical reaction kinetic model for the evaluation of the chemical behavior of Iodine and Cesium.
