Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. Moreover, a series of finite element analyzes using a model with residual stress due to welding revealed that the effect of residual stress on buckling strength is negligible in the evaluation method.
Yang, Z. H.*; Kubota, Yuki*; Corsi, A.*; Yoshida, Kazuki; Sun, X.-X.*; Li, J. G.*; Kimura, Masaaki*; Michel, N.*; Ogata, Kazuyuki*; Yuan, C. X.*; et al.
Physical Review Letters, 126(8), p.082501_1 - 082501_8, 2021/02
Times Cited Count:43 Percentile:96.7(Physics, Multidisciplinary)A quasifree (,) experiment was performed to study the structure of the Borromean nucleus B, which had long been considered to have a neutron halo. By analyzing the momentum distributions and exclusive cross sections, we obtained the spectroscopic factors for and orbitals, and a surprisingly small percentage of 9(2)% was determined for . Our finding of such a small component and the halo features reported in prior experiments can be explained by the deformed relativistic Hartree-Bogoliubov theory in continuum, revealing a definite but not dominant neutron halo in B. The present work gives the smallest - or -orbital component among known nuclei exhibiting halo features and implies that the dominant occupation of or orbitals is not a prerequisite for the occurrence of a neutron halo.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2020 Pressure Vessels and Piping Conference (PVP 2020) (Internet), 9 Pages, 2020/08
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. In addition, buckling strength evaluated by elasto-plastic buckling analysis had good accuracy compared to each test result by considering the stress-strain relationship and imperfection of test specimen.
Hiraishi, Masatoshi*; Iimura, Soshi*; Kojima, Kenji*; Yamaura, Junichi*; Hiraka, Haruhiro*; Ikeda, Kazutaka*; Miao, P.*; Ishikawa, Yoshihisa*; Torii, Shuki*; Miyazaki, Masanori*; et al.
Nature Physics, 10(4), p.300 - 303, 2014/04
Times Cited Count:103 Percentile:95.46(Physics, Multidisciplinary)Strasser, P.*; Shimomura, Koichiro*; Koda, Akihiro*; Kawamura, Naritoshi*; Fujimori, Hiroshi*; Makimura, Shunsuke*; Kobayashi, Yasuo*; Nakahara, Kazutaka*; Kato, Mineo*; Takeshita, Soshi*; et al.
Journal of Physics; Conference Series, 225, p.012050_1 - 012050_8, 2010/06
Times Cited Count:12 Percentile:95.21(Physics, Applied)Hiraka, Haruhiro*; Hayashi, Yoichiro*; Wakimoto, Shuichi; Takeda, Masayasu; Kakurai, Kazuhisa; Adachi, Tadashi*; Koike, Yoji*; Yamada, Ikuya*; Miyazaki, Masanori*; Hiraishi, Masatoshi*; et al.
Physical Review B, 81(14), p.144501_1 - 144501_6, 2010/04
Times Cited Count:15 Percentile:55.02(Materials Science, Multidisciplinary)Okuyama, Shinichi; Torii, Tatsuo; Suzuki, Akihiko*; Shibuya, Masanori*; Miyazaki, Nobuyuki*
Journal of Nuclear Science and Technology, 45(Suppl.5), p.414 - 416, 2008/06
Times Cited Count:27 Percentile:84.4(Nuclear Science & Technology)In case of a nuclear emergency when a large amount of radioactive substances and/or radiation is released from a nuclear facility, emergency radiation monitoring is carried out from the sea and air as well as from the ground adjacent to the facility to evaluate the influence of the radiation on the surrounding environment. As a means of radiation monitoring from the air, aerial monitoring using a manned helicopter is conducted. Although a manned helicopter can monitor a large area during a short time, flight at an altitude of 300 m or lower is prohibited by the Aviation Law in Japan. Therefore, it is difficult for a manned helicopter to measure the radiation profile near the ground and to measure the radiation level in a complicated terrain. In recent years, technologies for autonomous flying of industrial unmanned helicopters have been developed and applied to natural disasters. In expectation of the application of unmanned helicopters to aerial radiation monitoring during a nuclear emergency, we have developed a remote radiation monitoring system and investigated its possibilities.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
no journal, ,
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to cnfirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. In addition, buckling strength evaluated by elasto-plastic buckling analysis had good accuracy compared to each test result by considering the stress-strain relationship and imperfection of test specimen.
Tanaka, Masaaki; Oki, Shigeo; Miyazaki, Masashi; Takaya, Shigeru; Yokoyama, Kenji; Ando, Masanori
no journal, ,
Design optimization support tool named ARKADIA-Design for diverse nuclear power plant has been developing in Japan Atomic Energy Agency. Its development plans, goals, and schedules in the fields of core, plant structure including thermal-hydraulics, and maintenance are presented with brief introduction of progress at present.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
no journal, ,
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, the effect of initial imperfection and stress of large vessels manufactured by welding multiple plates on the buckling load was evaluated via a series of analyses. In these analyses, the superimposition of global imperfection over the entire vessel due to accumulation of misalignment in buckling mode imperfection had minimal effect on the buckling load. Accordingly, the length for measuring the imperfection amplitude should correspond to the wavelength of the buckling mode. The local imperfection and residual stress by welding also exerted small effects on the buckling load.