Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takayanagi, Tomohiro; Ono, Ayato; Fuwa, Yasuhiro; Shinozaki, Shinichi; Horino, Koki*; Ueno, Tomoaki*; Sugita, Moe; Yamamoto, Kazami; Oguri, Hidetomo; Kinsho, Michikazu; et al.
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.242 - 246, 2023/01
At J-PARC, semiconductor short pulse power supplies to replace kicker power supplies and semiconductor long pulse power supplies to replace klystron power supply systems are under construction. We have fabricated a 40kV/2kA/1.2
s unit power supply that employs a linear transformer drivers (LTD) system for kickers. Currently, we are working on a high voltage insulating cylinder insulator that suppresses corona discharges using only the insulator structure, without using insulating oil. In addition, the MARX system was adopted for klystron power supply system. A main circuit unit for 8kV/60A/830s rectangular pulse output and an 800V/60A correction circuit unit that improves the flat top droop from 10% to 1% were manufactured. Furthermore, a 2.2kV/2.4kW high voltage SiC inverter charger has been fabricated for this MARX power supply. The presentation will report the evaluation results of each test and prospects for semiconductor pulse power supplies.
Takayanagi, Tomohiro; Kinsho, Michikazu; Yamamoto, Kazami; Ueno, Tomoaki*; Horino, Koki*; Tokuchi, Akira*; Mushibe, Yoichi*
Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.45 - 49, 2017/12
J-PARC RCS needs updating of equipment after 10 years since the start of operation. Therefore, a pulse power supply applying a next generation semiconductor (SiC-MOSFET) with low switching loss and high breakdown voltage are investigated This supply constructs a serial / parallel multiplexing circuit using a SiC-MOSFET and a plurality of large capacity capacitors with one circuit board (LTD). By using this board as a main board and adopting a multistage hierarchical structure, it is possible to satisfy the specifications of the RCS kicker power supply with a voltage of 40 kV, a current of 4 kA and a rectangular wave pulse width of 1500 ns. Moreover, by adding a plurality of correction boards of 40 V and arbitrarily setting the operation trigger of the board, flatness correction is also possible. It was confirmed that the results of the preliminary test with the maximum output of 4 kV / 2 kA by are effective for maintaining stable operation at the RCS high intensity beam output.