Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Fukaya, Yuji; Okita, Shoichiro; Nakagawa, Shigeaki; Goto, Minoru; Ohashi, Hirofumi
Annals of Nuclear Energy, 168, p.108911_1 - 108911_7, 2022/04
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)A power distribution monitoring system by using a moving detector for a core with a long neutron flight path has been proposed. High Temperature Gas-cooled Reactor (HTGR) and Fast Reactor (FR) has a long neutron flight path and the neutrons reach to detector far from fuel assembly in the center of the core unlike Light Water Reactor (LWR). By using the feature, power distribution can be observed with a few detectors by moving the detector and computed tomography technology similar to X-ray Computed Tomography (CT). For a small-sized core, the power distribution can be evaluated only by an ex-core neutron detector. For a large-sized core with inner detectors, the power distribution can be observed with a small number of in-core detectors even if the deployment is limited due to material integrity conditions such as temperature environment. The feasibility is numerically confirmed by simulations of the HTGR core and its detector response. It is expected to observe the power distribution in the core of HTGR and FR, which is difficult continuously to deploy in-core detectors because of high temperature and/or high irradiation damage.
Barucci, M. A.*; Reess, J.-M.*; Bernardi, P.*; Doressoundiram, A.*; Fornasier, S.*; Le Du, M.*; Iwata, Takahiro*; Nakagawa, Hiromu*; Nakamura, Tomoki*; Andr
, Y.*; et al.
Earth, Planets and Space (Internet), 73(1), p.211_1 - 211_28, 2021/12
Times Cited Count：13 Percentile：80.63(Geosciences, Multidisciplinary)The MMX InfraRed Spectrometer (MIRS) is an imaging spectrometer on board of MMX JAXA mission. MIRS is built at LESIA-Paris Observatory in collaboration with four other French laboratories, collaboration and financial support of CNES and close collaboration with JAXA and MELCO. The instrument is designed to fully accomplish MMX's scientific and measurement objectives. MIRS will remotely provide near-infrared spectral maps of Phobos and Deimos containing compositional diagnostic spectral features that will be used to analyze the surface composition and to support the sampling site selection. MIRS will also study Mars atmosphere, in particular to spatial and temporal changes such as clouds, dust and water vapor.
Nakagawa, Akinori; Oyokawa, Atsushi; Murakami, Masashi; Yoshida, Yukihiko; Sasaki, Toshiki; Okada, Shota; Nakata, Hisakazu; Sugaya, Toshikatsu; Sakai, Akihiro; Sakamoto, Yoshiaki
JAEA-Technology 2021-006, 186 Pages, 2021/06
JAEA-Technology-2021-006.pdf:54.45MB
Radioactive wastes generated from R&D activities have been stored in Japan Atomic Energy Agency. In order to reduce the risk of taking long time to process legacy wastes, countermeasures for acceleration of waste processing and disposal were studied. Work analysis of waste processing showed bottleneck processes, such as evaluation of radioactivity concentration, segregation of hazardous and combustibles materials. Concerning evaluation of radioactivity concentration, a radiological characterization method using a scaling factor and a nondestructive gamma-ray measurement should be developed. The number of radionuclides that are to be selected for the safety assessment of the trench type disposal facility can decrease using artificial barriers. Hazardous materials, will be identified using records and nondestructive inspection. The waste identified as hazardous will be unpacked and segregated. Preliminary calculations of waste acceptance criteria of hazardous material concentrations were conducted based on environmental standards in groundwater. The total volume of the combustibles will be evaluated using nondestructive inspection. The waste that does not comply with the waste acceptance criteria should be mixed with low combustible material waste such as dismantling concrete waste in order to satisfy the waste acceptance criteria on a disposal facility average. It was estimated that segregation throughput of compressed waste should be increased about 5 times more than conventional method by applying the countermeasures. Further study and technology development will be conducted to realize the plan.
Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.
High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02
As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950
C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.
hypernucleus in the J-PARC E13 experimentNakagawa, Manami*; Hasegawa, Shoichi; Hayakawa, Shuhei; Hosomi, Kenji; Ichikawa, Yudai; Imai, Kenichi; Sako, Hiroyuki; Sato, Susumu; Tamura, Hirokazu; Tanida, Kiyoshi; et al.
JPS Conference Proceedings (Internet), 26, p.023005_1 - 023005_3, 2019/11
Takada, Shoji; Honda, Yuki*; Inaba, Yoshitomo; Sekita, Kenji; Nemoto, Takahiro; Tochio, Daisuke; Ishii, Toshiaki; Sato, Hiroyuki; Nakagawa, Shigeaki; Sawa, Kazuhiro*
Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10
Nuclear heat utilization systems connected to HTGRs will be designed on the basis of non-nuclear grade standards for easy entry of chemical plant companies, requiring reactor operations to continue even if abnormal events occur in the systems. The inventory control is considered as one of candidate methods to control reactor power for load following operation for siting close to demand area, in which the primary gas pressure is varied while keeping the reactor inlet and outlet coolant temperatures constant. Numerical investigation was carried out based on the results of nuclear heat supply fluctuation tests using HTTR by non-nuclear heating operation to focus on the temperature transient of the reactor core bottom structure by imposing stepwise fluctuation on the reactor inlet temperature under different primary gas pressures below 120C. As a result, it was emerged that the fluctuation absorption characteristics are not deteriorated by lowering pressure. It was also emerged that the reactor outlet temperature did not reach the scram level by increasing the reactor inlet temperature 10 C stepwise at 80% of the rated power as same with the full power case.
Nishihara, Tetsuo; Yan, X.; Tachibana, Yukio; Shibata, Taiju; Ohashi, Hirofumi; Kubo, Shinji; Inaba, Yoshitomo; Nakagawa, Shigeaki; Goto, Minoru; Ueta, Shohei; et al.
JAEA-Technology 2018-004, 182 Pages, 2018/07
JAEA-Technology-2018-004.pdf:18.14MB
Research and development on High Temperature Gas-cooled Reactor (HTGR) in Japan started since late 1960s. Japan Atomic Energy Agency (JAEA) in cooperation with Japanese industries has researched and developed system design, fuel, graphite, metallic material, reactor engineering, high temperature components, high temperature irradiation and post irradiation test of fuel and graphite, high temperature heat application and so on. Construction of the first Japanese HTGR, High Temperature engineering Test Reactor (HTTR), started in 1990. HTTR achieved first criticality in 1998. After that, various test operations have been carried out to establish the Japanese HTGR technologies and to verify the inherent safety features of HTGR. This report presents several system design of HTGR, the world-highest-level Japanese HTGR technologies, JAEA's knowledge obtained from construction, operation and management of HTTR and heat application technologies for HTGR.
hypernucleus in the J-PARC E13 experimentNakagawa, Manami*; Ekawa, Hiroyuki; Hasegawa, Shoichi; Hayakawa, Shuhei; Hosomi, Kenji; Hwang, S.; Ichikawa, Yudai; Imai, Kenichi; Sako, Hiroyuki; Sato, Susumu; et al.
JPS Conference Proceedings (Internet), 17, p.012009_1 - 012009_4, 2017/07
Honda, Yuki; Inaba, Yoshitomo; Nakagawa, Shigeaki; Yamazaki, Kazunori; Kobayashi, Shoichi; Aono, Tetsuya; Shibata, Taiju; Ishitsuka, Etsuo
JAEA-Technology 2017-013, 20 Pages, 2017/06
JAEA-Technology-2017-013.pdf:2.52MB
Decay heat is one of an important factor for a safety evaluation of depressurized loss-of-forced cooling accident, a representative high consequence accident, in high temperature gas-cooled reactor (HTGR). Traditionally, a conservative decay heat curve is used for safety analysis according to the regulatory standards. On the other hand, there is growing interest in obtaining test data related to decay heat for the use of uncertainty analysis. However, such data has not been obtained for prismatic-type HTGR. Therefore, we have launched a test program to obtain the decay heat data from the HTTR. As an initial step, an applicability confirmation test of decay heat evaluation method for HTGR was conducted in February 2017 without non-nuclear heating condition. This report introduces an estimation method for the decay heat based on test data using HTTR and shows the results of validation of the reactor residual heat evaluation method which will be used to obtain the decay heat data based on test data.
Kawasaki, Masatsugu; Nakajima, Junya; Yoshida, Keisuke; Kato, Saori; Nishino, Sho; Nozaki, Teo; Nakagawa, Masahiro; Tsunoda, Junichi; Sugaya, Yuki; Hasegawa, Rie; et al.
JAEA-Data/Code 2017-004, 57 Pages, 2017/03
JAEA-Data-Code-2017-004.pdf:2.34MB
In emergency situation of nuclear facilities, we need to estimate the radiation dose due to radiation and radioactivity to grasp the influence range of the accident in the early stage. Therefore, we prepare the case studies of dose assessment for public exposure dose and personal exposure dose and contribute them to emergency procedures. This document covers about accidents of nuclear facilities in Nuclear Science Research Institute and past accident of nuclear power plant, and it can be used for inheritance of techniques of emergency dose assessment.
Tochio, Daisuke; Honda, Yuki; Sato, Hiroyuki; Sekita, Kenji; Homma, Fumitaka; Sawahata, Hiroaki; Takada, Shoji; Nakagawa, Shigeaki
Journal of Nuclear Science and Technology, 54(1), p.13 - 21, 2017/01
Times Cited Count：1 Percentile：10.62(Nuclear Science & Technology)GTHTR300C is designed and developed in JAEA. The reactor system is required to continue a stable and safety operation as well as a stable power supply in the case that thermal-load is fluctuated by the occurrence of abnormal event in the heat utilization system. Then, it is necessary to demonstrate that the thermal-load fluctuation should be absorbed by the reactor system so as to continue the stable and safety operation could be continued. The thermal-load fluctuation absorption tests without nuclear heating were planned and conducted in JAEA to clarify the absorption characteristic of thermal-load fluctuation mainly by the reactor and by the IHX. As the result it was revealed that the reactor has the larger absorption capacity of thermal-load fluctuation than expected one, and the IHX can be contributed to the absorption of the thermal-load fluctuation generated in the heat utilization system in the reactor system. It was confirmed from there result that the reactor and the IHX has effective absorption capacity of the thermal-load fluctuation generated in the heat utilization system. Moreover it was confirmed that the safety estimation code based on RELAP5/MOD3 can represents the thermal-load fluctuation absorption behavior conservatively.
Yamasaki, Atsushi*; Fujiwara, Hidenori*; Tachibana, Shoichi*; Iwasaki, Daisuke*; Higashino, Yuji*; Yoshimi, Chiaki*; Nakagawa, Koya*; Nakatani, Yasuhiro*; Yamagami, Kohei*; Aratani, Hidekazu*; et al.
Physical Review B, 94(11), p.115103_1 - 115103_10, 2016/11
Times Cited Count：17 Percentile：61.21(Materials Science, Multidisciplinary)In this study, we systematically investigate three-dimensional(3D) momentum-resolved electronic structures of Ruddlesden-Popper-type iridium oxides Sr
Ir
O
using soft-X-ray angle-resolved photoemission spectroscopy (SX-ARPES). Our results provide direct evidence of an insulator-to-metal transition that occurs upon increasing the dimensionality of the IrO
-plane structure. This transition occurs when the spin-orbit-coupled 
= 1/2 band changes its behavior in the dispersion relation and moves across the Fermi energy. By scanning the photon energy over 350 eV, we reveal the 3D Fermi surface in SrIrO
and 
-dependent oscillations of photoelectron intensity in SrIrO
. To corroborate the physics deduced using low-energy ARPES studies, we propose to utilize SX-ARPES as a powerful complementary technique, as this method surveys more than one whole Brillouin zone and provides a panoramic view of electronic structures.
Ono, Masato; Shimizu, Atsushi; Kondo, Makoto; Shimazaki, Yosuke; Shinohara, Masanori; Tochio, Daisuke; Iigaki, Kazuhiko; Nakagawa, Shigeaki; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 2(4), p.044502_1 - 044502_4, 2016/10
In the loss of forced core cooling test using High Temperature engineering Test Reactor (HTTR), the forced cooling of reactor core is stopped without inserting control rods into the core and cooling by Vessel Cooling System (VCS) to verify safety evaluation codes to investigate the inherent safety of HTGR be secured by natural phenomena to make it possible to design a severe accident free reactor. The VCS passively removes the retained residual heat and the decay heat from the core via the reactor pressure vessel by natural convection and thermal radiation. In the test, the local temperature was supposed to exceed the limit from the viewpoint of long-term use at the uncovered water cooling tube by thermal reflectors in the VCS, although the safety of reactor is kept. Through a cold test, which was carried out by non-nuclear heat input from gas circulators with stopping water flow in the VCS, the local higher temperature position was specified although the temperature was sufficiently lower than the maximum allowable working temperature, and natural circulation of water had insufficient cooling effect on the temperature of water cooling tube below 1C. Then, a new safe and secured procedure for the loss of forced core cooling test was established, which will be carried out soon after the restart of HTTR.
Inaba, Yoshitomo; Sekita, Kenji; Nemoto, Takahiro; Honda, Yuki; Tochio, Daisuke; Sato, Hiroyuki; Nakagawa, Shigeaki; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 2(4), p.041001_1 - 041001_7, 2016/10
The nuclear heat utilization systems connected to High Temperature Gas-cooled Reactors (HTGRs) will be designed on the basis of non-nuclear grade standards in terms of the easier entry of chemical plant companies and the construction economics of the systems. Therefore, it is necessary that the reactor operations can be continued even if abnormal events occur in the systems. The Japan Atomic Energy Agency has developed a calculation code to evaluate the absorption of thermal load fluctuations by the reactors when the reactor operations are continued after such events, and has improved the code based on the High Temperature engineering Test Reactor (HTTR) operating data. However, there were insufficient data on the transient temperature behavior of the metallic core side components and the graphite core support structures corresponding to the fluctuation of the reactor inlet coolant temperature for further improvement of the code. Thus, nuclear heat supply fluctuation tests with the HTTR were carried out in non-nuclear heating operation to focus on thermal effect. In the tests, the coolant helium gas temperature was heated up to 120C by the compression heat of the gas circulators in the HTTR, and a sufficiently high fluctuation of 17C by devising a new test procedure was imposed on the reactor inlet coolant under the ideal condition without the effect of the nuclear power. Then, the temperature responses of the metallic core side components and the graphite core support structures were investigated. The test results adequately showed as predicted that the temperature responses of the metallic components are faster than those of the graphite structures, and the mechanism of the thermal load fluctuation absorption by the metallic components was clarified.
Honda, Yuki; Tochio, Daisuke; Nakagawa, Shigeaki; Sekita, Kenji; Homma, Fumitaka; Sawahata, Hiroaki; Sato, Hiroyuki; Sakaba, Nariaki; Takada, Shoji
JAEA-Technology 2016-016, 16 Pages, 2016/08
JAEA-Technology-2016-016.pdf:2.84MB
A system analysis code is validated with the thermal-load fluctuation absorption test with nun-nuclear heating by using the High Temperature Engineering test Reactor (HTTR) to clarify the High Temperature Gas-cooled Reactor (HTGR) system response against temperature transient. The thermal-load fluctuation absorption test consists on the thermal load fluctuation tests (non-nuclear heating) and heat application system abnormal simulating test (non-nuclear heating). The HTGR reactor response against temperature transient is clarified in the thermal load fluctuation test (non-nuclear heating). The Intermediate Heat Exchanger (IHX) reactor response against temperature transient is clarified in the heat application system abnormal simulating test (non-nuclear heating). With the two HTTR non-nuclear heating test, HTGR system response against temperature transient is obtained.
Honda, Yuki; Tochio, Daisuke; Sato, Hiroyuki; Nakagawa, Shigeaki; Ono, Masato; Fujiwara, Yusuke; Hamamoto, Shimpei; Iigaki, Kazuhiko; Takada, Shoji
Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 5 Pages, 2016/06
The characteristic confirmation test has been demonstrating by using the High Temperature engineering Test Reactor (HTTR). The thermal load fluctuation test, which is one of marginal performance test is planned to be carried out after restarting of the HTTR. The preliminary analysis for the thermal load fluctuation test has been investigated. In the analysis, the reactor outlet temperature can continue to be stable against the reactor inlet temperature changing by thermal fluctuation. It means that HTGR have the capability of absorbing thermal fluctuation. This paper focuses on the investigation of mechanism of absorbing thermal fluctuation. With additional analysis, it is cleared that the large negative graphite moderator reactivity enhances the capability of absorbing thermal fluctuation. In addition, in the middle of the core, graphite moderator reactivity insertion trend are inverted. This trend is unique to HTGR because of large temperature difference between core inlet and outlet.
Honda, Yuki; Sato, Hiroyuki; Nakagawa, Shigeaki; Takada, Shoji; Tochio, Daisuke; Sakaba, Nariaki; Sawa, Kazuhiro
JAEA-Technology 2015-012, 17 Pages, 2015/06
JAEA-Technology-2015-012.pdf:11.38MB
Japan Atomic Energy Agency (JAEA) proposed a draft safety requirement, which consists of the requirements for constructing a H plant under conventional chemical plant regulations as well as the requirements for collocation of a nuclear facility and a H plant. One of the key requirements is to maintain reactor normal operation condition during every possible condition in the H plant. In order to show that the requirement can be reasonably achieved, a system analysis code is validated with the HTTR experimental data obtained in January 2015. The validated code is applied for the evaluation of a postulated abnormal event in H plant to be connected to the HTTR. The results showed that the evaluation items such as reactor power and reactor outlet coolant temperature do not exceed evaluation criteria. As a conclusion, a feasibility of H plant construction under non-nuclear regulations is validated by showing that the stable reactor operation can be achieved against temperature transients induced by abnormal conditions in the H plant.
Takada, Shoji; Sekita, Kenji; Nemoto, Takahiro; Honda, Yuki; Tochio, Daisuke; Inaba, Yoshitomo; Sato, Hiroyuki; Nakagawa, Shigeaki; Sawa, Kazuhiro
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 7 Pages, 2015/05
To investigate the safety design criteria of heat utilization system for the HTGRs, it is necessary to evaluate the effect of fluctuation of thermal load on the reactor. The nuclear heat supply fluctuation test by non-nuclear heating was carried out to simulate the nuclear heat supply test which is carried out in the nuclear powered operation. The test data is used to verify the numerical code to calculate the temperature of core bottom structure to carry out the safety evaluation of abnormal events in the heat utilization system. In the test, the helium gas temperature was heated up to 120C. A sufficiently high temperature disturbance was imposed on the reactor inlet temperature. It was found that the response of temperatures of metallic components such as side shielding blocks was faster than those of graphite blocks in the core bottom structure, which was significantly affected by the heat capacities of components, the level of imposed disturbance and heat transfer performance.
Takada, Shoji; Shimizu, Atsushi; Kondo, Makoto; Shimazaki, Yosuke; Shinohara, Masanori; Seki, Tomokazu; Tochio, Daisuke; Iigaki, Kazuhiko; Nakagawa, Shigeaki; Sawa, Kazuhiro
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 5 Pages, 2015/05
In the loss of forced core cooling test using High Temperature engineering Test Reactor (HTTR), the forced cooling of reactor core is stopped without inserting control rods into the core and cooling by Vessel Cooling System (VCS) to demonstrate the inherent safety of HTGR be secured by natural phenomena to make it possible to design a severe accident free reactor. In the test, the local temperature was supposed to exceed the limit from the viewpoint of long-term use at the uncovered water cooling tube by thermal reflectors in the VCS, although the safety of reactor is kept. The local higher temperature position was specified although the temperature was sufficiently lower than the maximum allowable working temperature, and natural circulation of water had insufficient cooling effect on the temperature of water cooling tube below 1C. Then, a new safe and secured procedure for the loss of forced core cooling test was established, which will be carried out soon after the restart of HTTR.
Inaba, Yoshitomo; Tochio, Daisuke; Ueta, Shohei; Nakagawa, Shigeaki
Journal of Nuclear Science and Technology, 51(11-12), p.1336 - 1344, 2014/11
Times Cited Count：4 Percentile：30.92(Nuclear Science & Technology)In order to ensure the thermal integrity of fuel in the high temperature engineering test reactor (HTTR), it is necessary that the maximum fuel temperature in the normal operation is to be lower than a thermal design limit of 1495C. In the core thermal and hydraulic design of the HTTR, the maximum fuel temperature was estimated to be 1492C, which satisfied the thermal design limit. However, the estimated temperature was derived by using hot spot factors with a large safety margin for the consideration of uncertainties in the design stage without the HTTR practical operating data, and thus there is no doubt that the estimated temperature includes excessive conservativeness. In order to obtain the maximum fuel temperature with appropriate conservativeness, the maximum fuel temperature has been re-evaluated on the basis of the HTTR operating data. In this paper, the random factors of the hot spot factors are revised by using the HTTR first fuel fabrication data, and the new maximum fuel temperature is estimated. As a result, the estimated maximum fuel temperature can be reduced to 1424C. The reduction of the maximum fuel temperature leads to a larger thermal margin in nuclear and fuel designs.
