The Report on the Meeting of the Young Researchers' association of JHPS "Issues following the revision of radiation dose limits for the lens of the eye"

Kataoka, Noriaki*; Nakajima, Junya; Otsu, Saori; Takahashi, Akina; Takamiya, Kei; Umeda, Masayuki; Nishiono, Kanoko*

Hoken Butsuri (Internet), 56(1), p.28 - 31, 2021/03

https://doi.org/10.5453/jhps.56.28

no abstracts in English

Emergent spin-1 Haldane gap and ferroelectricity in a frustrated spin- ladder

Ueda, Hiroshi*; Onoda, Shigeki*; Yamaguchi, Yasuhiro*; Kimura, Tsuyoshi*; Yoshizawa, Daichi*; Morioka, Toshiaki*; Hagiwara, Masayuki*; Hagihara, Masato*; Soda, Minoru*; Masuda, Takatsugu*; et al.

Physical Review B, 101(14), p.140408_1 - 140408_6, 2020/04

https://doi.org/10.1103/PhysRevB.101.140408

Intercomparison of numerical atmospheric dispersion prediction models for emergency response to emissions of radionuclides with limited source information in the Fukushima Dai-ichi Nuclear Power Plant accident

Iwasaki, Toshiki*; Sekiyama, Tsuyoshi*; Nakajima, Teruyuki*; Watanabe, Akira*; Suzuki, Yasushi*; Kondo, Hiroaki*; Morino, Yu*; Terada, Hiroaki; Nagai, Haruyasu; Takigawa, Masayuki*; et al.

Atmospheric Environment, 214, p.116830_1 - 116830_11, 2019/10

https://doi.org/10.1016/j.atmosenv.2019.116830

The utilization of numerical atmospheric dispersion prediction (NDP) models for accidental discharge of radioactive substances was recommended by a working group of the Meteorological Society of Japan. This paper is to validate the recommendation through NDP model intercomparison in the accidental release from the Fukushima Dai-ichi Nuclear Power Plant in 2011. Emission intensity is assumed to be constant during the whole forecast period for the worst-case scenario unless time sequence of emission is available. We expect to utilize forecasts of surface air contaminations for preventions of inhalations of radioactive substances, and column-integrated amounts for mitigation of radiation exposure associated with wet deposition. Although NDP forecasts have ensemble spread, they commonly figure out relative risk in space and time. They are of great benefit to disseminating effective warnings to public without failure. The multi-model ensemble technique may be effective to improve the reliability.

Investigation of the electronic structure and lattice dynamics of the thermoelectric material Na-doped SnSe

Wu, P.*; Zhang, B.*; Peng, K. L.*; Hagiwara, Masayuki*; Ishikawa, Yoshihisa*; Kofu, Maiko; Lee, S. H.*; Kumigashira, Hiroshi*; Hu, C. S.*; Qi, Z. M.*; et al.

Physical Review B, 98(9), p.094305_1 - 094305_7, 2018/09

https://doi.org/10.1103/PhysRevB.98.094305

Using angle-resolved photoemission spectroscopy and inelastic neutron scattering, we have studied how electronic structures and lattice dynamics evolve with temperature in Na-doped SnSe.

Discrete fracture network modeling based on in-situ data at underground gallery, 2

Nakajima, Makoto*; Seno, Shoji*; Onoe, Hironori; Ishibashi, Masayuki; Saegusa, Hiromitsu; Sawada, Atsushi

Dai-42-Kai Gamban Rikigaku Ni Kansuru Shimpojiumu Koenshu (CD-ROM), p.107 - 112, 2014/01

Japan Atomic Energy Agency is proceeding with the Mizunami Underground Research Laboratory Project in order to establish comprehensive techniques for the investigation, analysis and assessment of the deep geological environment in fractured crystalline rock for geological disposal of high level radioactive wastes. We have carried out discrete fracture network modeling, groundwater flow and particle tracking simulation in order to understand the important factors for the solute transport characterizations. In this paper, a method for estimating hydraulic parameter of discrete fracture network model based on in-situ data at underground gallery are described.

Examination of NbSn conductors for ITER central solenoids

Nabara, Yoshihiro; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; Takahashi, Yoshikazu; Matsui, Kunihiro; Koizumi, Norikiyo; et al.

IEEE Transactions on Applied Superconductivity, 23(3), p.4801604_1 - 4801604_4, 2013/06

https://doi.org/10.1109/TASC.2013.2244159

no abstracts in English

Corrosion study of titanium-5% tantalum alloy in hot nitric acid condensate

Takeuchi, Masayuki; Sano, Yuichi; Nakajima, Yasuo; Uchiyama, Gunzo; Nojima, Yasuo*; Fujine, Sachio*

Proceedings of 20th International Conference on Nuclear Engineering and the ASME 2012 Power Conference (ICONE-20 & POWER 2012) (DVD-ROM), 6 Pages, 2012/07

A long-term corrosion tendency and metal salt effect in heating nitric acid solution on corrosion behavior of titanium-5% tantalum alloy (Ti-5Ta) in hot nitric acid condensate condition were mainly researched to discuss the aging behavior of reprocessing equipments such as evaporators made of titanium or its alloy. The hot pure nitric acid solution with continuous renewing such as the nitric acid condensate condition is severe corrosion environment for their materials because of the corrosion inhibition effect from titanium ions as corrosion products or oxidizing ions in nitric acid solution. From the results of the long-term corrosion test for total 11,000 hrs, the corrosion of Ti-5Ta in the nitric acid condensate was accelerated with increase of the nitric acid concentration in the condensate. The corrosion rate was nearly constant during the immersion time and the test coupons suffered a uniform corrosion. Thus, from the viewpoints of nitric acid corrosion, the life-time of the reprocessing equipments made of titanium or its alloy will be roughly estimated based on the results of average corrosion rate in operation. It was also found that the kind and concentration of metal salt in the heating nitric acid solution gave a remarkable effect on the concentration of nitric acid vapor and the corrosion of Ti-5Ta in the hot nitric acid condensate. Most of the evaporators for reprocessing plants include metal ions in the heating nitric acid solution, so the metal salt effect is one of the corrosion factors to control the corrosion behavior of titanium alloy in condensate. The nitric acid concentration in the condensate increases by adding the metal salts in the heating nitric acid solution, in addition, the larger valence of metal ions was contributed to the increase of nitric acid concentration in the condensate. Consequently, the metal salts effect in the heating nitric acid solution accelerates the corrosion of Ti-5Ta in the nitric acid condensate.

Preparation for the ITER central solenoid conductor manufacturing

Hamada, Kazuya; Nunoya, Yoshihiko; Isono, Takaaki; Takahashi, Yoshikazu; Kawano, Katsumi; Saito, Toru; Oshikiri, Masayuki; Uno, Yasuhiro; Koizumi, Norikiyo; Nakajima, Hideo; et al.

IEEE Transactions on Applied Superconductivity, 22(3), p.4203404_1 - 4203404_4, 2012/06

https://doi.org/10.1109/TASC.2011.2176708

Japan Atomic Energy Agency (JAEA) has the responsibility for procurement of all of the ITER central solenoid (CS) conductor lengths. The CS conductor is composed of 576 Nb Sn superconducting strands and 288 Cu strands assembled together into a multistage cable and protected by a circle-in-square sheath tube (jacket) with the outer dimension of 49 mm. In preparation for CS conductor production, the following R&D activities have been performed; (1) Mechanical tests at 4 K have been performed for jacket candidate materials such as 316LN and JK2LB, (2) Welding test for filler selection, (3) Measurement of coefficient of sliding friction using a 100-m long dummy cable, (4) Deformation characteristics of the conductor cross section after compaction and spooling. As a result of these R&D, the CS conductor jacket manufacturing technologies have been confirmed to start the procurement of the CS conductor.

Development of manufacturing technologies for ITER Toroidal Field coil conductors

Hamada, Kazuya; Takahashi, Yoshikazu; Nabara, Yoshihiro; Kawano, Katsumi; Ebisawa, Noboru; Oshikiri, Masayuki; Tsutsumi, Fumiaki; Saito, Toru*; Nakajima, Hideo; Matsuda, Hidemitsu*; et al.

Teion Kogaku, 47(3), p.153 - 159, 2012/03

https://doi.org/10.2221/jcsj.47.153

The Japan Atomic Energy Agency (JAEA) has the responsibility to procure 25% of the ITER Toroidal Field coil conductors as the Japanese Domestic Agency (JADA) in the ITER project. The TF conductor is a circular shaped, cable-in-conduit conductor, composed of a cable and a stainless steel conduit (jacket). The outer diameter and maximum length of the TF conductor are 43.7 mm and 760 m, respectively. JAEA has constructed newly conductor manufacturing facility. Prior to starting conductor, JAEA manufactured a 760-m long Cu dummy conductor as process qualification of dummy cable, the jacket sections and fabrication procedures, such as welding, cable insertion, compaction and spooling. Following qualification of all manufacturing processes, JAEA has started to fabricate superconducting conductors for the TF coils.

First qualification of ITER toroidal field coil conductor jacketing

Hamada, Kazuya; Takahashi, Yoshikazu; Isono, Takaaki; Nunoya, Yoshihiko; Matsui, Kunihiro; Kawano, Katsumi; Oshikiri, Masayuki; Tsutsumi, Fumiaki; Koizumi, Norikiyo; Nakajima, Hideo; et al.

Fusion Engineering and Design, 86(6-8), p.1506 - 1510, 2011/10

https://doi.org/10.1016/j.fusengdes.2010.12.054

Japan Atomic Energy Agency has a responsibility for procurement of the ITER toroidal field coil conductors as Japanese Domestic Agency (JADA) of the ITER project. The TF conductor is a circular shaped cable-in-conduit conductor, which is composed of cable and stainless steel conduit (jacket). The outer diameter and wall thickness of jacket are 43.7mm and 2mm, respectively. The cable consists of 900 NbSn superconducting strands and 522 Cu strands. The length of TF conductor is 780m in maximum. Preparation of conductor fabrication was completed in December 2009. And then, to demonstrate a conductor manufacturing procedure, JADA fabricated 780m-long Cu dummy conductor as a process qualification. Finally, the 780m-long Cu dummy conductor has been successfully completed, ahead of other domestic agencies that are in charge of TF conductor procurement. Since all of manufacturing processes have been qualified, JADA started to fabricate superconducting conductors for TF coils.