Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

Neutron capture cross section measurement of minor actinides in fast neutron energy region for study on nuclear transmutation system

Katabuchi, Tatsuya*; Hori, Junichi*; Iwamoto, Nobuyuki; Iwamoto, Osamu; Kimura, Atsushi; Nakamura, Shoji; Shibahara, Yuji*; Terada, Kazushi*; Tosaka, Kenichi*; Endo, Shunsuke; et al.

JAEA-Conf 2020-001, p.5 - 9, 2020/12

https://doi.org/10.11484/jaea-conf-2020-001

The Periodic safety review report of Tokai Reprocessing Plant

Fukuda, Kazuhito; Tomioka, Kenichiro*; Omori, Satoru; Nakano, Takafumi; Nagasato, Yoshihiko

JAEA-Technology 2014-032, 566 Pages, 2014/11

JAEA-Technology-2014-032.pdf:32.45MB
JAEA-Technology-2014-032(errata).pdf:9.54MB

The Periodic Safety Review of TRP is assessment of the validity of safety activities in order to get assurance for continuous operation by adding effective items to extract and to execute for TRP safety. We performed 4 items; for (1) evaluation of safety activity at TRP, as we confirmed organization was ordered and managed. For (2) evaluation of status of safety activities reflecting the latest knowledge, we confirmed improvement of safety was continued adequately reflecting from the experience for safety. For (3) technical review on aging for the safety related structures, systems and components, we evaluated the guaranty of safety under assumption of continuous maintenance till the next Periodic Safety Review. For (4) establishment of long term maintenance program, we found no additional activities into maintenance programs, however, for several installations we established a plan and utilized them for reliability.

Development of advanced tritium breeding material with added lithium for ITER-TBM

Hoshino, Tsuyoshi; Kato, Kenichi*; Natori, Yuri*; Oikawa, Fumiaki; Nakano, Natsuko*; Nakamura, Mutsumi*; Sasaki, Kazuya*; Suzuki, Akihiro*; Terai, Takayuki*; Tatenuma, Katsuyoshi*

Journal of Nuclear Materials, 417(1-3), p.684 - 687, 2011/10

https://doi.org/10.1016/j.jnucmat.2010.12.128

Lithium titanate (LiTiO) is one of the most promising candidates among tritium breeding materials because of its good tritium release. Addition of H to inert sweep gas has been proposed for enhancing the tritium release from tritium breeding materials. However, the mass of LiTiO was decreased with time in the hydrogen atmosphere. It is assumed that the mass decrease indicates the loss of the oxygen contained in the sample caused by the change from Ti to Ti , and that the partial pressures of Li-containing species were increased in the hydrogen atmosphere. In order to decrease the mass-change at high temperature, advanced tritium breeding material with added Li should be developed to improve the physical and chemical stability in hydrogen atmosphere. In the case of the LiTiO samples used by the present study, LiOHHO and HTiO were proportionally mixed with the molar ratio Li/Ti of either 2.0 and 2.2. These samples are designated as L20 (Li/Ti = 2.0) and L22 (Li/Ti = 2.2), respectively. The results of XRD measurement showed that the phases in advanced tritium breeding material were as follows. L22 existed as non-stoichiometric compound LiTiO.

Stress corrosion cracking behavior of type 304 stainless steel irradiated under different neutron dose rates at JMTR

Kaji, Yoshiyuki; Kondo, Keietsu; Aoyagi, Yoshiteru; Kato, Yoshiaki; Taguchi, Taketoshi; Takada, Fumiki; Nakano, Junichi; Ugachi, Hirokazu; Tsukada, Takashi; Takakura, Kenichi*; et al.

Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors (CD-ROM), p.1203 - 1216, 2011/08

In order to investigate the effect of neutron dose rate on tensile property and irradiation assisted stress corrosion cracking (IASCC) growth behavior, the crack growth rate (CGR) test, tensile test and microstructure observation have been conducted with type 304 stainless steel specimens. The specimens were irradiated in high temperature water simulating the temperature of boiling water reactor (BWR) up to about 1dpa with two different dose rates at the Japan Materials Testing Reactor (JMTR). The radiation hardening increased with the dose rate, but there was little effect on CGR. Increase of the yield strength of specimens irradiated with the low dose rate condition was caused by the increase of number density of frank loops. Little difference of radiation-induced segregation at grain boundaries was observed in specimens irradiated by different dose rates. Furthermore, there was little effect on local plastic deformation behavior near crack tip in the crystal plasticity simulation.

Identified charged hadron production in collisions at = 200 and 62.4 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06

https://doi.org/10.1103/PhysRevC.83.064903

Transverse momentum distributions and yields for , and in collisions at = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different collisions. We also present the scaling properties such as and scaling and discuss the mechanism of the particle production in collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.

Annual report on the environmental radiation monitoring around the Tokai Reprocessing Plant FY2009

Sumiya, Shuichi; Matsuura, Kenichi; Watanabe, Hitoshi; Nakano, Masanao; Takeyasu, Masanori; Fujita, Hiroki; Isozaki, Tokuju; Morisawa, Masato; Mizutani, Tomoko; Kokubun, Yuji; et al.

JAEA-Review 2011-004, 161 Pages, 2011/03

JAEA-Review-2011-004.pdf:4.09MB

Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2009 to March 2010. Appendices present comprehensive information, such as monitoring program, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes.

Site dependent hardening of the lanthanum metal lattice by hydrogen absorption

Machida, Akihiko; Watanuki, Tetsu; Omura, Ayako*; Ikeda, Tomohiro*; Aoki, Katsutoshi; Nakano, Satoshi*; Takemura, Kenichi*

Solid State Communications, 151(5), p.341 - 345, 2011/03

https://doi.org/10.1016/j.ssc.2010.12.030

The compressibility of lanthanum (La) metal and its hydrides were measured at room temperature by high pressure synchrotron X-ray diffraction. La metal pressurized in a hydrogen medium forms a hydride with an fcc metal lattice, which likely contains hydrogen at a concentration close to 3.0. Equations of state have been determined by helium compression experiments for LaH with tetrahedral interstitial sites fully occupied with hydrogen atoms and for LaH with octahedral interstitial sites partially occupied with hydrogen atoms and tetrahedral sites fully occupied. Both hydrides possess fcc metal lattices. These values are three times larger than that of La metal and are very close to each other despite the difference in hydrogen occupation states. The hardening of the metal lattice by hydrogenation is attributed predominantly to hydrogen-metal interactions at the tetrahedral sites and is most pronounced for La, which has the largest ionic radius among rare-earth metals.

Manual for environmental radiological surveillance

Sumiya, Shuichi; Matsuura, Kenichi; Nakano, Masanao; Takeyasu, Masanori; Morisawa, Masato; Onuma, Toshimitsu; Fujita, Hiroki; Mizutani, Tomoko; Watanabe, Hajime*; Sugai, Masamitsu*

JAEA-Review 2009-064, 166 Pages, 2010/03

JAEA-Review-2009-064.pdf:11.08MB

Environmental radiation monitoring around the Tokai Reprocessing Plant has been conducted by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of JAEA, Chapter IV; Environmental monitoring" and Environmental Radiation Monitoring Program decided by the Ibaraki prefectural government. The radiation monitoring installations and equipments were also prepared for emergency. This manual describes; (1) the installations of radiological measurement, (2) the installations of meteorological observation, and (3) environmental data processing system for executing the terrestrial environmental monitoring by Environmental Protection Section, Radiation Protection Department. The environmental monitoring has been operated through the manual published in 1993 (PNC TN8520 93-001). Then the whole articles were revised because the partially of installations and equipments having been updated in recent years.

Annual report on the environmental radiation monitoring around the Tokai Reprocessing Plant FY2008

Takeishi, Minoru; Sumiya, Shuichi; Matsuura, Kenichi; Watanabe, Hitoshi; Nakano, Masanao; Takeyasu, Masanori; Isozaki, Hisaaki*; Isozaki, Tokuju; Morisawa, Masato; Fujita, Hiroki; et al.

JAEA-Review 2009-048, 177 Pages, 2009/12

JAEA-Review-2009-048.pdf:19.3MB
JAEA-Review-2009-048(errata).pdf:0.12MB

Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV; Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2008 to March 2009. Appendices present comprehensive information, such as monitoring program, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes.