Study on simulation code for transverse instabilities for the J-PARC MR

Yoshimura, Nobuyuki*; Toyama, Takeshi*; Shobuda, Yoshihiro; Nakamura, Takeshi*; Omi, Kazuhito*; Kobayashi, Aine*; Okada, Masashi*; Sato, Yoichi*; Nakaya, Tsuyoshi*

Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.260 - 264, 2023/11

https://www.pasj.jp/web_publish/pasj2023/proceedings/PDF/TUP0/TUP03.pdf

The J-PARC main ring (MR) will be increased to 1.3 MW. To cope with the increase in beam intensity, the intra-bunch feedback system (IBFB) needs to be upgraded to handle higher frequencies up to about 200 MHz. To evaluate the performance and understand the optimal parameters after this upgrade, we are developing a particle tracking simulation that includes the necessary components. The recoherence period induced by chromaticity between tracking simulations and experiments are compared and it cannot be discribed by the simple simulations, and we investigate what mechanisms explain this result. The shift of synchrotron tune caused by longitudinal wakes using tracking simulations are calculated and it find that introducing the effect of longitudinal wakes only does not explain the recoherence period in the experimental results.

A Study on transmutation of LLFPs using various types of HTGRs

Kora, Kazuki*; Nakaya, Hiroyuki*; Matsuura, Hideaki*; Goto, Minoru; Nakagawa, Shigeaki; Shimakawa, Satoshi*

Nuclear Engineering and Design, 300, p.330 - 338, 2016/04

https://doi.org/10.1016/j.nucengdes.2016.01.030

In order to investigate the potential of high temperature gas-cooled reactors (HTGRs) for transmutation of long-lived fission products (LLFPs), numerical simulation of four types of HTGRs were carried out. In addition to the gas-turbine high temperature reactor system "GTHTR300", a small modular HTGR plant "HTR50S" and two types of plutonium burner HTGRs "Clean Burn with MA" and "Clean Burn without MA" were considered. The simulation results show that an early realization of LLFP transmutation using a compact HTGR may be possible since the HTR50S can transmute fair amount of LLFPs for its thermal output. The Clean Burn with MA can transmute a limited amount of LLFPs. However, an efficient LLFP transmutation using the Clean Burn without MA seems to be convincing as it is able to achieve very high burn-ups and produce LLFP transmutation more than GTHTR300. Based on these results, we propose utilization of variety of HTGRs for LLFP transmutation and storage.

A Numerical study of the effects of aerosol hygroscopic properties to dry deposition on a broad-leaved forest

Katata, Genki; Kajino, Mizuo*; Matsuda, Kazuhide*; Takahashi, Akira*; Nakaya, Ko*

Atmospheric Environment, 97, p.501 - 510, 2014/11

https://doi.org/10.1016/j.atmosenv.2013.11.028

To investigate the impact of hygroscopic growth on dry deposition onto forest canopies, numerical simulations of PM2.5 sulfate deposition using a multi-layer atmosphere-SOiL-VEGetation model (SOLVEG) ware performed. The scheme of particle dry deposition in SOLVEG was extended for application to a broad-leaved forest. An aerosol hygroscopic model based on the widely used -Khler theory was incorporated into the model to calculate water uptake by the aerosols. The model accurately reproduced essential turbulent exchange fluxes (momentum, heat, and water vapor) over the canopies and the soil temperature and moisture for a deciduous broad-leaved forest in central Japan. Temporal variations in the measured PM2.5 sulfate deposition velocity were generally reproduced by the model. By considering an increase in particle diameter due to hygroscopic growth, the prediction accuracy of the modeled deposition velocity under humid conditions was improved. Numerical experiments for varying aerosol size distributions and hygroscopic properties showed that the geometric mean diameter and hygroscopicity of particles have a large influence on hygroscopic growth levels. The results also suggested that the deposition velocity of wet particles increased due to hygroscopic growth when the relative humidity (RH) was approximately 50%, and that the velocity reached five times greater than that under dry conditions when RH exceeded 95%.

A Study on the technology for reducing cement-type materials used for tunnel supports at high-level radioactive waste disposal sites (Joint research)

Hayashi, Katsuhiko; Noguchi, Akira; Kishi, Hirokazu; Kabayashi, Yasushi*; Nakama, Shigeo; Fujita, Tomoo; Naito, Morimasa; Tada, Hiroyuki*; Kumasaka, Hiroo*; Goke, Mitsuo*; et al.

JAEA-Research 2010-057, 101 Pages, 2011/03

JAEA-Research-2010-057.pdf:7.47MB

Cement-type materials that are used for supports or grouting at high-level radioactive waste disposal facilities leach into the groundwater and create a highly alkaline environment. Of concern in highly alkaline environments are the alteration of bentonite used as buffers or backfill materials, and of surrounding rock mass, and the increased uncertainty regarding the provision of performance of the disposal system over a long period of time. In this study, to reduce the quantity of cement-type materials that cause highly alkaline environments, technical feasibility of the support structure including the materials which considered the long-term performance of the HLW disposal system are discussed by using knowledge and technology accumulated in JAEA and Shimizu Construction. Moreover, based on the results, the problems remained in the application to the future HLW disposal institution are summarized.

Development of construction method for a drift minimizing use of cementious material, 7; Experimental study on the rock mortar composite material based on low alkaline cement

Saito, Akira*; Nakaya, Atsushi*; Tada, Hiroyuki*; Kumasaka, Hiroo*; Kobayashi, Yasushi

no journal, , 

no abstracts in English

Development of construction methods of a drift to be reduction of amount of cement use, 9; Test of a deformation of macadam and stability of drift tunnel

Kumasaka, Hiroo*; Saito, Akira*; Nakaya, Atsushi*; Tada, Hiroyuki*; Hayashi, Katsuhiko; Noguchi, Akira; Kishi, Hirokazu; Nakama, Shigeo

no journal, , 

We are proposing to use the rock segment reducing the amount of the cementutious materials. In this report, we are getting young's modulus and poisson's ratio from the deformation experiment of the macadam mass, and performed a stability analysis of the gallery filled with macadam between the hostrock and the rock segment. We performed a alternating bearing test with high confirming pressure, and we estimated the Young's modulus and the poisson's ratio of the mass macadam from the result of the bearing test. After that, we performed the stability analysis of the galleries in the condition of the JAEA second report with the rock segment and the macadam. We found that the strain at the surface of the host rock is smaller than that of conventional one, and the stability of the host rock is remained, and the compressive stress in the rock segment is the half of the compressive strength of it. We considered that the rock segment support system is stable enough for the supporting system.

Development of construction methods of a drift to be reduction of amount of cement use, 10; Study on bending properties of the rock segment using low alkaline mortar

Tada, Hiroyuki*; Saito, Akira*; Nakaya, Atsushi*; Kumasaka, Hiroo*; Hayashi, Katsuhiko; Noguchi, Akira; Kishi, Hirokazu; Nakama, Shigeo

no journal, , 

Bending test of the segmental rings consist of staggered pieces of rocks bonded by low-pH mortar is conducted in order to identify the mechanical properties of rock segmental rings comparing with parallel arrangement. As a result, it was found that the maximum load was reached at 130 to 210 kN in the positive bending tests for staggered rock blocks, lower than 210 to 270 kN for rock blocks arranged in parallel. In the negative bending tests, on the other hand, the maximum load was reached at 30 to 40 kN, lower than a maximum load of 40 kN for the rock blocks arranged in parallel. The results thus varied. Cracks occurred along the interface between the rock block and mortar in the specimen for the blocks arranged in parallel. For the staggered rock blocks, cracks penetrated through the mortar and the rock block near the point of loading in the specimen. Thus, it was confirmed that cracking occurred in different manners.

Study to transmute long life fission products into short-lived nuclides

Kochi, Shohei*; Nakaya, Hiroyuki*; Shimakawa, Satoshi; Matsuura, Hideaki*; Yasumoto, Takashi*; Nakao, Yasuyuki*; Goto, Minoru; Nakagawa, Shigeaki

no journal, , 

no abstracts in English

Performance of high-temperature gas-cooled reactor as a tritium production device for fusion reactors

Matsuura, Hideaki*; Kochi, Shohei*; Nakaya, Hiroyuki*; Yasumoto, Takashi*; Nakao, Yasuyuki*; Shimakawa, Satoshi; Goto, Minoru; Nakagawa, Shigeaki; Nishikawa, Masabumi*

no journal, , 

The performance of a high-temperature gas-cooled reactor as a tritium production device for fusion reactors was examined by performing a core burn-up calculation with the continuous-energy Monte Carlo code MVP-BURN. It was shown that the high-temperature gas cooled reactor can contribute to the tritium production for fusion reactors.

Study on transmutation of long-lived fission products using high temperature gas cooled reactor; Effect of ma admixture on transmutation

Kubo, Kotaro*; Matsuura, Hideaki*; Nakaya, Hiroyuki*; Kawamoto, Yasuko*; Nakao, Yasuyuki*; Shimakawa, Satoshi; Goto, Minoru; Nakagawa, Shigeaki

no journal, , 

The transmutation performance for LLFP and Mainer Actinide (MA) was evaluated when 2t of Tc-99 and 50kg of MA was loaded into GTHTR300 core. The compositions of MA was defined as the same as the spent fuel of a PWR with 12 years cooling. The amounts of transmutation were analyzed by performing the burn-up calculation with MVP-BURN for a fuel block geometry. As a result, the transmutation performance of GTHTR300 was evaluated that 18 kg of Tc-99 and 10 kg of MA were transmutated by one year operation.