Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Meigo, Shinichiro; Nishikawa, Masaaki; Iwamoto, Hiroki; Matsuda, Hiroki
EPJ Web of Conferences, 146, p.11039_1 - 11039_4, 2017/09
Times Cited Count：2 Percentile：78.04(Nuclear Science & Technology)no abstracts in English
Oi, Motoki; Meigo, Shinichiro; Akutsu, Atsushi*; Kawasaki, Tomoyuki; Nishikawa, Masaaki*; Fukuda, Shimpei
Proceedings of 12th International Topical Meeting on Nuclear Applications of Accelerators (AccApp '15), p.89 - 96, 2016/00
At J-PARC, 3 GeV proton beam with power of 1MW is delivered to the spallation neutron source (JSNS) through beam transport line called 3NBT. At the high power accelerator facilities even a small abnormal event has a possibility to be critical so that the beam control system is crucial. In order to find tiny anomaly, rapid data analysis system is required. We developed control and data analysis system based on the Experimental Physics and Industrial Control System (EPICS) and Control System Studio (CSS). To carry out beam tuning efficiently, the beam control system based on the Strategic Accelerator Design (SAD) code has been developed. With the several shots of beam and by the one click of operational panel of the screen, required magnet field can be calculated and set automatically. Also we developed automated e-mail system to announce the abnormal event to the experts persons. With these systems, we can reduce both beam tuning time and down time.
Meigo, Shinichiro; Oi, Motoki; Ikezaki, Kiyomi*; Kawasaki, Tomoyuki; Kinoshita, Hidetaka; Akutsu, Atsushi*; Nishikawa, Masaaki*; Fukuda, Shimpei
Proceedings of 12th International Topical Meeting on Nuclear Applications of Accelerators (AccApp '15), p.255 - 260, 2016/00
Ogiwara, Norio; Yanagibashi, Toru; Hikichi, Yusuke; Nishikawa, Masaaki; Kamiya, Junichiro; Wada, Kaoru*
Vacuum, 98, p.18 - 21, 2013/12
Times Cited Count：7 Percentile：30.71(Materials Science, Multidisciplinary)Kamiya, Junichiro; Ogiwara, Norio; Nishikawa, Masaaki; Hikichi, Yusuke; Yanagibashi, Toru; Kinsho, Michikazu
Vacuum, 98, p.12 - 17, 2013/12
Times Cited Count：9 Percentile：37.98(Materials Science, Multidisciplinary)One of the reasons of a beam loss in a high power accelerator is leakage magnetic field from a magnet at a close beam line, which distorts the beam orbit and makes the beam hit the wall of the beam pipe. The most effective way to shield such leakage field is to cover the beam by the magnetic materials at the nearest space. This means that vacuum chambers should be made of the magnetic materials. We selected the permalloy, which has very high magnetic permeability for such a magnetic material. However, there is not proven evidence of the vacuum chambers, which are made of magnetic materials. We have developed a vacuum chamber of such new material with the object of vacuum and magnetic characteristics.
Ogiwara, Norio; Suganuma, Kazuaki; Hikichi, Yusuke; Nishikawa, Masaaki; Yanagibashi, Toru; Kamiya, Junichiro; Kinsho, Michikazu
Journal of the Vacuum Society of Japan, 56(5), p.159 - 162, 2013/05
Omichi, Masaaki*; Takano, Katsuyoshi*; Sato, Takahiro; Kamiya, Tomihiro; Ishii, Yasuyuki; Okubo, Takeru; Koka, Masashi; Kada, Wataru; Sugimoto, Masaki; Nishikawa, Hiroyuki*; et al.
Journal of Nanoscience and Nanotechnology, 12, p.7401 - 7404, 2012/09
Times Cited Count：2 Percentile：11.57(Chemistry, Multidisciplinary)Takano, Katsuyoshi*; Asano, Atsushi*; Maeyoshi, Yuta*; Marui, Hiromi*; Omichi, Masaaki*; Saeki, Akinori*; Seki, Shu*; Sato, Takahiro; Ishii, Yasuyuki; Kamiya, Tomihiro; et al.
Journal of Photopolymer Science and Technology, 25(1), p.43 - 46, 2012/07
Times Cited Count：2 Percentile：6.57(Polymer Science)Takano, Katsuyoshi*; Sugimoto, Masaki; Asano, Atsushi*; Maeyoshi, Yuta*; Marui, Hiromi*; Omichi, Masaaki*; Saeki, Akinori*; Seki, Shu*; Sato, Takahiro; Ishii, Yasuyuki; et al.
Transactions of the Materials Research Society of Japan, 37(2), p.237 - 240, 2012/06
Kamiya, Junichiro; Ogiwara, Norio; Nishikawa, Masaaki; Hikichi, Yusuke; Yanagibashi, Toru; Kinsho, Michikazu
Proceedings of 3rd International Particle Accelerator Conference (IPAC '12) (Internet), p.2522 - 2524, 2012/05
In the vacuum system of J-PARC Rapid cycling synchrotron (RCS), we use beam pipes and bellows whose materials are vacuum fired at 700
850 
C in order to eliminate atoms in their bulk who are origin of outgassing. Until now, beam power has been increased up to 300 kW. Pressure in synchrotron beam line increased when the high power beam was accelerated. However, increment of pressure has reduced during the continuous beam operation. It is because the molecules, which adsorb on surface of the wall of the vacuum chambers, desorb by an ion bombardment and a heat generation due to an eddy current. Because the atoms in the bulk is eliminated, desorption of the molecules, which adsorb on the surface, means the reduction of the outgassing from the wall. In this presentation, we will report the past situation of the vacuum system during the beam operation. In addition, we also show the status after the Great East Japan Earthquake.
Ogiwara, Norio; Suganuma, Kazuaki; Hikichi, Yusuke; Nishikawa, Masaaki; Yanagibashi, Toru; Kamiya, Junichiro; Kinsho, Michikazu
Proceedings of 3rd International Particle Accelerator Conference (IPAC '12) (Internet), p.487 - 489, 2012/05
Maeyoshi, Yuta*; Takano, Katsuyoshi*; Asano, Atsushi*; Marui, Hiromi*; Omichi, Masaaki*; Sato, Takahiro; Kamiya, Tomihiro; Ishii, Yasuyuki; Okubo, Takeru; Koka, Masashi; et al.
Japanese Journal of Applied Physics, 51(4R), p.045201_1 - 045201_4, 2012/04
Times Cited Count：1 Percentile：4.43(Physics, Applied)Kamiya, Junichiro; Ogiwara, Norio; Nishikawa, Masaaki; Hikichi, Yusuke; Yanagibashi, Toru; Suganuma, Kazuaki
Journal of the Vacuum Society of Japan, 55(4), p.156 - 159, 2012/04
It is usually difficult to reduce outgassing of a large structure inside a vacuum chamber by baking the whole chamber, which causes the large extension of the chamber and needs a lot of heater power. The solution is to rise the temperature of structure object without heating the vacuum chamber. This means to install heat source inside the chamber and increase the heat quantity to the object by inserting the heat shield between the object and the chamber. In the particle accelerator field, there are a lot of such requirements for reducing outgassing of structures inside vacuum chambers. One example is a kicker magnet, which is installed in a vacuum chamber and consists mainly of ferrite cores and aluminum electric plates. We applied the above method to the outgassing reduction of the kicker. In this article, we show outline of this in-situ bake-out method, the effects of the heat shield on the heat quantity and the result of the outgassing reduction.
Takano, Katsuyoshi*; Asano, Atsushi*; Maeyoshi, Yuta*; Marui, Hiromi*; Omichi, Masaaki*; Saeki, Akinori*; Seki, Shu*; Sato, Takahiro; Kamiya, Tomihiro; Ishii, Yasuyuki; et al.
no journal, ,
Takano, Katsuyoshi*; Asano, Atsushi*; Maeyoshi, Yuta*; Marui, Hiromi*; Omichi, Masaaki*; Saeki, Akinori*; Seki, Shuhei*; Sato, Takahiro; Ishii, Yasuyuki; Kamiya, Tomihiro; et al.
no journal, ,
Meigo, Shinichiro; Oi, Motoki; Fujimori, Hiroshi*; Kawasaki, Tomoyuki; Nishikawa, Masaaki; Fukuda, Shimpei
no journal, ,
no abstracts in English
Oi, Motoki; Hosokawa, Hidemitsu*; Nishikawa, Masaaki*; Fukuda, Shimpei; Teshigawara, Makoto; Meigo, Shinichiro; Takada, Hiroshi
no journal, ,
At J-PARC, a neutron production target is installed in the helium vessel, and 3-GeV proton beams are delivered from a 3-GeV synchrotron to the target through a beamline with high vacuum environment. A proton beam window (PBW) is installed to isolate the helium vessel from the proton beamline. Since the PBW is degraded by radiation damage, it is scheduled to be replaced every 2 or 3 years under the 1-MW operation. In the summer outage in 2017, the PBW #2 was replaced to #3. A shielding cask was used for transferring the activated PBW, while hands-on works were done to remove the cooling water pipes at the top of the shielding plug of PBW. Since the cooling water contains 5
10
Bq/cc of tritium, it was drained from the pipes and the pipes were dried before removing PBW. The hands-on work was carried out in a green-house with a local exhaust device to prevent scattering of radioactive materials. In this presentation, we report the replacement work of the PBW including safety measures.
