Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
superstructure of monolayer MoS
and MoSe on Au(111)Yasuda, Satoshi; Takahashi, Ryosuke*; Osaka, Ryo*; Kumagai, Ryota*; Miyata, Yasumitsu*; Okada, Susumu*; Hayamizu, Yuhei*; Murakoshi, Kei*
Small, 13(31), p.1700748_1 - 1700748_8, 2017/08
Times Cited Count：24 Percentile：70.23(Chemistry, Multidisciplinary)MoS and MoSe monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out-of-plane strain in both MoS and MoSe layers, whereas no strain generation is observed on polycrystalline Au or SiO/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S-Mo-S (Se-Mo-Se) structure and Au atoms via unique moir superstructure formation for MoS and MoSe layers on Au(111). This observation indicates that the specific adsorption sites give rise to out-of-plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS or MoSe layer.
collisions at 
= 200 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 84(1), p.012006_1 - 012006_18, 2011/07
Times Cited Count：29 Percentile：72.31(Astronomy & Astrophysics)We report on the event structure and double helicity asymmetry (
) of jet production in longitudinally polarized collisions at = 200 GeV. Photons and charged particles were measured by the PHENIX experiment. Event structure was compared with the results from PYTHIA event generator. The production rate of reconstructed jets is satisfactorily reproduced with the next-to-leading-order perturbative QCD calculation. We measured = -0.0014 
0.0037 at the lowest 
bin and -0.0181 0.0282 at the highest bin. The measured is compared with the predictions that assume various 
distributions.
collisions at = 200 and 62.4 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06
Times Cited Count：184 Percentile：99.44(Physics, Nuclear)Transverse momentum distributions and yields for 
, and 
in collisions at = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different collisions. We also present the scaling properties such as 
and 
scaling and discuss the mechanism of the particle production in collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.
and Au+Au collisions at 
= 200 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Aramaki, Y.*; et al.
Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04
Times Cited Count：8 Percentile：49.7(Physics, Nuclear)Measurements of electrons from the decay of open-heavy-flavor mesons have shown that the yields are suppressed in Au+Au collisions compared to expectations from binary-scaled collisions. Here we extend these studies to two particle correlations where one particle is an electron from the decay of a heavy flavor meson and the other is a charged hadron from either the decay of the heavy meson or from jet fragmentation. These measurements provide more detailed information about the interaction between heavy quarks and the quark-gluon matter. We find the away-side-jet shape and yield to be modified in Au+Au collisions compared to collisions.
+ collisions at = 200 GeV and scaling properties of hadron productionAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03
Times Cited Count：175 Percentile：98.48(Astronomy & Astrophysics)The PHENIX experiment at RHIC has measured the invariant differential cross section for production of 
, 
, 
and 
mesons in collisions at = 200 GeV. The spectral shapes of all hadron transverse momentum distributions are well described by a Tsallis distribution functional form with only two parameters, 
and 
, determining the high 
and characterizing the low regions for the spectra, respectively. The integrated invariant cross sections calculated from the fitted distributions are found to be consistent with existing measurements and with statistical model predictions.
Toyama, Takeshi*; Arakawa, Dai*; Hiramatsu, Shigenori*; Igarashi, Susumu*; Lee, S.*; Matsumoto, Hiroshi*; Odagiri, Junichi*; Tejima, Masaki*; Tobiyama, Makoto*; Hashimoto, Yoshinori*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.981 - 983, 2010/05
Experiences of operating BPM's during beam commissioning at the J-PARC MR are reported. The subjects are: (1) bug report, statistics and especially the effect of a beam duct step, (2) position resolution estimation (
30 micrometers with 1 sec averaging), (3) beam based alignment.
Matsuda, Makoto; Takeuchi, Suehiro; Tsukihashi, Yoshihiro; Hanashima, Susumu; Abe, Shinichi; Osa, Akihiko; Ishizaki, Nobuhiro; Tayama, Hidekazu; Nakanoya, Takamitsu; Kabumoto, Hiroshi; et al.
Proceedings of 3rd Annual Meeting of Particle Accelerator Society of Japan and 31st Linear Accelerator Meeting in Japan, p.275 - 277, 2006/00
no abstracts in English
Asazuma, Shinichiro; Takeda, Shinso; Toshihiko, Ohnishi,; Soma, Susumu; Onose, Ken ; Shoichi, Tajima,; Okada, Takashi
JNC TN8420 2004-001, 122 Pages, 2004/11
JNC-TN8420-2004-001.pdf:167.0MB
In order to prevent spread of contamination, glovebox dismantling activity is usually performed in a confined enclosure with personal radioactive protective equipment. Since large potion of these materials is made of vinyl acetate, there exist potential risks of fire, damage and injury to the environment and workers during the dismantling (cutting or melting) operation. It is therefore important to establish standard for proper use of equipment and hazard controls in such a specific environment. Working Group composed of Tokai Works and O-arai Works has examined and developed the operational standard for cutting work in glovebox dismantlement. The result is reflected to the Tokai Works Safety Operational Standard.
Kusama, Yasuo; Okada, Sohei; Yagi, Toshiaki; Ito, Masayuki; ; Yoshikawa, Masahito; Tanaka, Susumu; Kawakami, Waichiro; Yoshida, Kenzo; Machi, Sueo; et al.
JAERI-M 88-178, 383 Pages, 1988/09
no abstracts in English
Okada, T.; Ishibashi, H.*; Kitani, Susumu
Journal of Colloid and Interface Science, 29(4), p.613 - 616, 1969/04
Times Cited Count：9no abstracts in English
Osa, Akihiko; Abe, Shinichi; Asozu, Takuhiro; Hanashima, Susumu; Ishii, Tetsuro; Ishizaki, Nobuhiro; Kabumoto, Hiroshi; Kutsukake, Kenichi; Matsuda, Makoto; Nakamura, Masahiko; et al.
no journal, ,
At JAEA-tandem accelerator facility, we can produce radioactive nuclei by means of proton induced uranium fission, heavy ion fusion or transfer reaction. Since TRIAC was opened for use in 2005, we have provided RNBs of fission products and 
Li. For the production of Li, we chose 
C (
Li, Li) neutron transfer reaction by Li primary beam and a 99% enriched C sintered disk target. The release time of Li ions from the C sintered target/ion source system was measured to be 3.2 s. We are developing the RNB of 
Li (T
=178 ms) but the long release time caused a significant loss of the beam intensity. A boron nitride target which has fast release of Li is developed for Li beam with intensity of 10
pps after separation by JAEA-ISOL.
Okazaki, Koki*; Naito, Susumu*; Nakayama, Kunihiko*; Makino, Shunichiro*; Shigeyama, Musashi*; Kuwako, Akira*; Izumi, Mikio*; Ito, Jun*; Okada, Hisashi*; Muto, Keitaro
no journal, ,
In fast breeder reactor (FBR), it is important to detect a small sodium leak surely for safety. As the coolant sodium used in FBR is low pressure, a small leak occurs from a crack before a pipe breaks, therefore it is possible to detect a sodium leak so as to shutdown a reactor before a pipe completely breaks. The sodium leaking from piping of cooling system reacts with oxygen etc. including with the ambient gas to form aerosols. In the second coolant system of the prototype liquid metal FBR Monju, the ambient air around piping is drawn into radiative ionization detector (RID). When sodium aerosols are detected by RID, chemical analysis of aerosols and the viewing of the leak point are carried out, then sodium leak is confirmed. As the signal of RID depends on temperature strongly and RID detects the aerosols which do not include sodium, the improvements of RID are demanded for reliability. Moving fluid ionization detector (MID) and laser leak detector (LLD) have been developed to improve these points. MID can reduce the dependence for temperature of the signal strength, and LLD can detect sodium atoms which are included in aerosols by means of laser-induced breakdown spectroscopy. An experiment was carried out for validating sodium leak detection system with MID and LLD under real environment installed in the second coolant system of Monju. In the experiments, sodium was not leaked, and ambient air around piping of the secondary coolant system was introduced through actual sampling line and measured by MID and LLD. In addition a sodium level in the ambient air was measured by means of ion chromatography. The experiment showed that the background signals of MID and LLD were stable and low and that the sodium level due to the background of salinity (NaCl) contained in the ambient air was lower than three orders of magnitude than the sodium level for small sodium leak. The plant applicability of MID and RID was validated by this experiment.
