Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Uchibori, Akihiro; Doda, Norihiro; Aoyagi, Mitsuhiro; Sonehara, Masateru; Sogabe, Joji; Okano, Yasushi; Takata, Takashi*; Tanaka, Masaaki; Enuma, Yasuhiro; Wakai, Takashi; et al.
Nuclear Engineering and Design, 413, p.112492_1 - 112492_10, 2023/11
Times Cited Count:1 Percentile:72.91(Nuclear Science & Technology)The ARKAIDA has been developed to realize automatic optimization of plant design from safety evaluation for the advanced reactors represented by a sodium-cooled fast reactor. ARKADIA-Design offers functions to support design optimization both in normal operating conditions and design basis events. The multi-level simulation approach by the coupled analysis such as neutronics, core deformation, core thermal hydraulics was developed as one of the main technologies. On the other hand, ARKAIDA-Safety aims for safety evaluation considering severe accidents. As a key technology, the numerical methods for in- and ex-vessel coupled phenomena during severe accidents in sodium-cooled fast reactors were tested through a hypothetical severe accident event. Improvement of the ex-vessel model and development of the AI technology to find best design solution have been started.
Tanaka, Masaaki; Uchibori, Akihiro; Okano, Yasushi; Yokoyama, Kenji; Uwaba, Tomoyuki; Enuma, Yasuhiro; Wakai, Takashi; Asayama, Tai
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
The book, JSME Series in Thermal and Nuclear Power Generation Vol.3 Sodium-cooled Fast Reactor, was published as a 30th anniversary memorial project of Power & Energy Systems Division. This paper describes an introduction of the book on a part of key technologies regarding safety assessment, thermal-hydraulics, neutronics, and fuel and material development. This introductory paper also provides an overview of an integrated evaluation system named ARKADIA to offer the best possible solutions for challenges arising during the design process, safety assessment, and operation of a nuclear plant over its life cycle, in active use of the R&D efforts and knowledges on thermal-hydraulics and safety assessment with state-of-the-art numerical analysis technologies.
Taira, Yoshitaka*; Endo, Shunsuke; Kawamura, Shiori*; Nambu, Taro*; Okuizumi, Mao*; Shizuma, Toshiyuki*; Omer, M.; Zen, H.*; Okano, Yasuaki*; Kitaguchi, Masaaki*
Physical Review A, 107(6), p.063503_1 - 063503_10, 2023/06
Times Cited Count:0 Percentile:0.01(Optics)no abstracts in English
Tanaka, Masaaki; Enuma, Yasuhiro; Okano, Yasushi; Uchibori, Akihiro; Yokoyama, Kenji; Seki, Akiyuki; Wakai, Takashi; Asayama, Tai
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 11 Pages, 2023/05
Uchibori, Akihiro; Sogabe, Joji; Okano, Yasushi; Takata, Takashi*; Doda, Norihiro; Tanaka, Masaaki; Enuma, Yasuhiro; Wakai, Takashi; Asayama, Tai; Ohshima, Hiroyuki
Proceedings of Technical Meeting on State-of-the-art Thermal Hydraulics of Fast Reactors (Internet), 10 Pages, 2022/09
The ARKAIDA has been developed to realize automatic optimization of plant design from safety evaluation for the advanced reactors represented by a sodium-cooled fast reactor. ARKADIA-Design offers functions to support design optimization both in normal operating conditions and design basis events. The multi-level simulation approach by the coupled analysis such as neutronics, core deformation, core thermal hydraulics was developed as one of the main technologies of the ARKADIA-Design. On the other hand, ARKAIDA-Safety aims for safety evaluation considering severe accidents. As a key technology, the numerical methods for in- and ex-vessel coupled phenomena during severe accidents in sodium-cooled fast reactors were tested through a hypothetical severe accident event.
Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Takamura, Shuichi*; Kado, Shinichiro*; Fujii, Takashi*; Fujiyama, Hiroshi*; Takabe, Hideaki*; Adachi, Kazuo*; Morimiya, Osamu*; Fujimori, Naoji*; Watanabe, Takayuki*; Hayashi, Yasuaki*; et al.
Kara Zukai, Purazuma Enerugi No Subete, P. 164, 2007/03
no abstracts in English
Ninomiya, Hiromasa; Akiba, Masato; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hayashi, Nobuhiko; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Inoue, Nobuyuki; et al.
Journal of the Korean Physical Society, 49, p.S428 - S432, 2006/12
To contribute DEMO and ITER, the design to modify the present JT-60U into superconducting coil machine, named National Centralized Tokamak (NCT), is being progressed under nationwide collaborations in Japan. Mission, design and strategy of this NCT program is summarized.
Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.
Nuclear Fusion, 46(3), p.S29 - S38, 2006/03
Times Cited Count:13 Percentile:41.76(Physics, Fluids & Plasmas)The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.
Tsuchiya, Katsuhiko; Akiba, Masato; Azechi, Hiroshi*; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; et al.
Fusion Engineering and Design, 81(8-14), p.1599 - 1605, 2006/02
Times Cited Count:1 Percentile:9.98(Nuclear Science & Technology)no abstracts in English
Tamai, Hiroshi; Akiba, Masato; Azechi, Hiroshi*; Fujita, Takaaki; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; Hosogane, Nobuyuki; Ichimura, Makoto*; et al.
Nuclear Fusion, 45(12), p.1676 - 1683, 2005/12
Times Cited Count:15 Percentile:45.53(Physics, Fluids & Plasmas)Design studies are shown on the National Centralized Tokamak facility. The machine design is carried out to investigate the capability for the flexibility in aspect ratio and shape controllability for the demonstration of the high-beta steady state operation with nation-wide collaboration, in parallel with ITER towards DEMO. Two designs are proposed and assessed with respect to the physics requirements such as confinement, stability, current drive, divertor, and energetic particle confinement. The operation range in the aspect ratio and the plasma shape is widely enhanced in consistent with the sufficient divertor pumping. Evaluations of the plasma performance towards the determination of machine design are presented.
Tamai, Hiroshi; Matsukawa, Makoto; Kurita, Genichi; Hayashi, Nobuhiko; Urata, Kazuhiro*; Miura, Yushi; Kizu, Kaname; Tsuchiya, Katsuhiko; Morioka, Atsuhiko; Kudo, Yusuke; et al.
Plasma Science and Technology, 6(1), p.2141 - 2150, 2004/02
Times Cited Count:2 Percentile:6.49(Physics, Fluids & Plasmas)The dominant issue for the the modification program of JT-60 (JT-60SC) is to demonstrate the steady state reactor relevant plasma operation. Physics design on plasma parameters, operation scenarios, and the plasma control method are investigated for the achievement of high-. Engineering design and the R&D on the superconducting magnet coils, radiation shield, and vacuum vessel are performed. Recent progress in such physics and technology developments is presented.
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Chujo, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
no abstracts in English
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Cho, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
Times Cited Count:33 Percentile:69.14(Physics, Fluids & Plasmas)no abstracts in English
Omori, Yoshikazu; Matsukawa, Makoto; Omori, Shunzo; Terakado, Tsunehisa; Okano, Jun; Noda, Masaaki*
NIFS-MEMO-36, p.358 - 361, 2002/06
no abstracts in English
Nishio, Satoshi; Ushigusa, Kenkichi; Ueda, Shuzo; Polevoi, A.*; Kurita, Genichi; Tobita, Kenji; Kurihara, Ryoichi; Hu, G.; Okada, Hidetoshi*; Murakami, Yoshiki*; et al.
JAERI-Research 2000-029, 105 Pages, 2000/10
no abstracts in English
Yoshida, Hiroyuki; Ono, Ayako; Okano, Masaaki*; Makino, Yasushi*
no journal, ,
no abstracts in English