Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tobita, Minoru*; Goto, Katsunori*; Omori, Takeshi*; Osone, Osamu*; Haraga, Tomoko; Aono, Ryuji; Konda, Miki; Tsuchida, Daiki; Mitsukai, Akina; Ishimori, Kenichiro
JAEA-Data/Code 2023-011, 32 Pages, 2023/11
JAEA-Data-Code-2023-011.pdf:0.93MB
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field as trench and pit. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to the study of radioactivity concentration evaluation methods for radioactive wastes generated from nuclear research facilities, we collected and analyzed concrete samples generated from JRR-3, JRR-4 and JAERI Reprocessing Test Facility. In this report, we summarized the radioactivity concentrations of 23 radionuclides (
H, 
C, 
Cl, 
Ca, 
Co, 
Ni, 
Sr, 
Nb, 
Ag, 
Cs, 
Ba, 
Eu, 
Eu, 
Ho, 
U, 
U, 
U, Pu, 
Pu, 
Pu, 
Am, 
Am, 
Cm) which were obtained from radiochemical analysis of the samples in fiscal years 2021-2022.
Tobita, Minoru*; Konda, Miki; Omori, Takeshi*; Nabatame, Tsutomu*; Onizawa, Takashi*; Kurosawa, Katsuaki*; Haraga, Tomoko; Aono, Ryuji; Mitsukai, Akina; Tsuchida, Daiki; et al.
JAEA-Data/Code 2022-007, 40 Pages, 2022/11
JAEA-Data-Code-2022-007.pdf:1.99MB
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete, ash, ceramic and brick samples generated from JRR-3, JRR4 and JRTF facilities. In this report, we summarized the radioactivity concentrations of 24 radionuclides (H, C, Cl, Ca, Co, Ni, Sr, Nb, 
Tc, Ag, 
I, Cs, Ba, Eu, Eu, Ho, U, U, Pu, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples in fiscal years 2020-2021.
Ho, H. Q.; Ishii, Toshiaki; Nagasumi, Satoru; Ono, Masato; Shimazaki, Yosuke; Ishitsuka, Etsuo; Goto, Minoru; Simanullang, I. L.*; Fujimoto, Nozomu*; Iigaki, Kazuhiko
Nuclear Engineering and Design, 396, p.111913_1 - 111913_9, 2022/09
Times Cited Count：1 Percentile：31.61(Nuclear Science & Technology)Tobita, Minoru*; Haraga, Tomoko; Endo, Tsubasa*; Omori, Hiroyuki*; Mitsukai, Akina; Aono, Ryuji; Ueno, Takashi; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2021-013, 30 Pages, 2021/12
JAEA-Data-Code-2021-013.pdf:1.47MB
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete samples generated from JPDR facility. In this report, we summarized the radioactivity concentrations of 21 radionuclides (H, C, Cl, Ca, Co, Ni, Sr, Nb, Ag, Cs, Eu, Eu, Ho, U, U, Pu, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples in fiscal year 2018-2019.
Tsuchida, Daiki; Haraga, Tomoko; Tobita, Minoru*; Omori, Hiroyuki*; Omori, Takeshi*; Murakami, Hideaki*; Mitsukai, Akina; Aono, Ryuji; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2020-022, 34 Pages, 2021/03
JAEA-Data-Code-2020-022.pdf:1.74MB
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete samples generated from JRR-3 and JPDR. In this report, we summarized the radioactivity concentrations of 22 radionuclides(H, C, Cl, Ca, Co, Ni, Sr, Nb, Ag, Ba, Cs, Eu, Eu, Ho, U, U, Pu, 
Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples.
Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.
High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02
As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950
C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.
Kuwata, Haruka*; Misono, Toshiharu; Fujiwara, Kenso; Takeishi, Minoru; Manabe, Sachi*; Kitamura, Akihiro
Radiation Environment and Medicine, 9(1), p.28 - 34, 2020/02
The analysis of tritium in aquatic biota is one of the most important research areas in Fukushima. The conventional method for measuring the concentration of tritium consists of complicated pretreatment procedures and requires skillful techniques as well as a significant amount of time. Consequently, there are only a few reports on tritium monitoring data in marine products from the coast of Fukushima. In this study, we measured the Tissue Free Water Tritium (TFWT) and Organically Bound Tritium (OBT) in flounders collected from the coast of Fukushima to examine the impacts of the nuclear accident on aquatic biota. The study was done for a period of 4 years; from 2015 to 2018. The conventional method of analysis was firstly used, after which the method was modified by improving the freeze-drying and combustion water recovery processes. Results from both methods show that the most of the concentrations of the TFWT and OBT in the flounder were below the detection or quantitative limit. The effect of the nuclear accident on humans, through internal exposure, was also examined and found to be negligible. Although some uncertainties exist due to the short cut of the processes, the modified version could be considered an effective and practical approximate method.
Ito, Shinichi*; Yokoo, Tetsuya*; Masuda, Takatsugu*; Yoshizawa, Hideki*; Soda, Minoru*; Ikeda, Yoichi*; Ibuka, Soshi*; Kawana, Daichi*; Sato, Taku*; Nambu, Yusuke*; et al.
JPS Conference Proceedings (Internet), 8, p.034001_1 - 034001_6, 2015/09
Takada, Shoji; Iigaki, Kazuhiko; Shinohara, Masanori; Tochio, Daisuke; Shimazaki, Yosuke; Ono, Masato; Yanagi, Shunki; Nishihara, Tetsuo; Fukaya, Yuji; Goto, Minoru; et al.
Nuclear Engineering and Design, 271, p.472 - 478, 2014/05
Times Cited Count：8 Percentile：53.31(Nuclear Science & Technology)JAEA has carried out research and development to establish the technical basis of HTGRs using HTTR. To connect hydrogen production system to HTTR, it is necessary to ensure the reactor dynamics when thermal-load of the system is lost. Thermal-load fluctuation test is planned to demonstrate the reactor dynamics stability and to validate plant dynamics codes. It will be confirmed that the reactor become stable state during losing a part of removed heat at heat-sink. A temperature coefficient of reactivity is one of the important parameters for core dynamics calculations, and changes with burnup because of variance of fuel compositions. Measurement of temperature coefficient of reactivity has been conducted to confirm the validity of calculated temperature coefficient of reactivity. A LOFC test using HTTR has been carried out to verify the inherent safety under the condition of LOFC while the reactor shut-down system disabled.
Hasegawa, Noboru; Ochi, Yoshihiro; Kawachi, Tetsuya; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Kaihori, Takeshi; Morita, Toshimasa; Sasaki, Akira; Terakawa, Kota*; et al.
X-Ray Lasers 2012; Springer Proceedings in Physics, Vol.147, p.117 - 120, 2014/00
Times Cited Count：0 Percentile：0(Engineering, Electrical & Electronic)We have developed the femto-second laser pump and soft X-ray laser probe system in order to observe the dynamical processes of the femto-second laser ablation. By using this system, we succeed to obtain the temporal evolution of the soft X-ray reflectivity from the laser induced Pt surface. The results lead that the rate of decrease in the reflectivity of the probe beam has a non-linear relation with the pump laser fluence.
Ono, Masato; Goto, Minoru; Shinohara, Masanori; Nojiri, Naoki; Tochio, Daisuke; Shimazaki, Yosuke; Yanagi, Shunki
JAEA-Technology 2013-001, 35 Pages, 2013/03
JAEA-Technology-2013-001.pdf:6.04MB
The temperature coefficient measurements of the HTTR have been carried out. In the beginning of the operation, temperature coefficients at the reactor power of 30 kW and 9 MW were obtained through 1999 to 2000. The operation days of the HTTR fuel reached 375 Effective Full Power Days (EFPD), which is over a half of design operation days (660 EFPD). The temperature coefficient measurements were conducted at the same power levels of 30 kW and 9 MW to evaluate burnup effect. Also, to measure temperature coefficient in high accuracy, technique of core temperature control and technique of core temperature homogenization were established.
Takada, Shoji; Iigaki, Kazuhiko; Shinohara, Masanori; Tochio, Daisuke; Shimazaki, Yosuke; Ono, Masato; Nishihara, Tetsuo; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; et al.
Proceedings of 6th International Topical Meeting on High Temperature Reactor Technology (HTR 2012) (USB Flash Drive), 8 Pages, 2012/10
JAEA has carried out research and development to establish the technical basis of HTGRs using HTTR. LOFC test to verify the inherent safety of HTGR under the condition of loss of forced cooling while the reactor shut-down system disabled was initiated. A temperature coefficient of reactivity is one of the important parameters for core dynamics calculations for safety analysis, and changes with burnup because of variance of fuel compositions, which has been measured to confirm the validity of the calculated ones. In order to connect hydrogen production system to HTTR, it is necessary to ensure the reactor safety when thermal-load of the hydrogen production system is lost. Thermal load fluctuation test is planned to demonstrate the reactor safety and gain the test data for validation of the plant dynamics code. It will be confirmed that the reactor become stable state during a part of removed heat at HTTR heat-sink is lost.
Ochi, Yoshihiro; Terakawa, Kota*; Hasegawa, Noboru; Yamamoto, Minoru*; Tomita, Takuro*; Kawachi, Tetsuya; Minami, Yasuo*; Nishikino, Masaharu; Imazono, Takashi; Ishino, Masahiko; et al.
Japanese Journal of Applied Physics, 51(1), p.016601_1 - 016601_3, 2012/01
Times Cited Count：10 Percentile：40.61(Physics, Applied)We have developed a soft X-ray laser interferometer based on the double Lloyd's mirror and obtained a single shot interferogram by a 7-ps pulse at the wavelength of 13.9 nm. Micrometer grooves with 5-nm depth were successfully reconstructed from the interferogram. The lateral and depth resolutions were estimated to be 1.5 
m and better than 1 nm, respectively. This interferometer will be an attractive diagnostic device for observing transiently changing nano-scale deviations on solid surfaces.
Kawachi, Tetsuya; Hasegawa, Noboru; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Oba, Toshiyuki; Kaihori, Takeshi; Kishimoto, Maki; Ochi, Yoshihiro; Tanaka, Momoko; et al.
X-Ray Lasers 2010; Springer Proceedings in Physics, Vol.136, p.15 - 24, 2011/12
This paper reviews recent improvement in the source development of laser-driven X-ray lasers and the applications in the research fields of material science, laser processing, X-ray imaging, and radiation damage in biological cells. In the application for material science, we have firstly observed temporal correlation between the domain structures of ferro-electric substance under the Curie temperature. In the laser processing, new X-ray laser interferometer reveals us the nano-scale surface distortion of substance pumped by a femto-second optical pulse. In the X-ray diffraction image, we have taken several static images of micro-structure of samples: now we are trying to extend the objective to nano-scale dynamics using pump and probe method. In the radiation damage of biological cells, we observed double strand break in DNA using X-ray laser exposure; this results are compared with the case using incoherent several KeV X-ray exposure.
Hasegawa, Noboru; Ochi, Yoshihiro; Kawachi, Tetsuya; Terakawa, Kota*; Tomita, Takuro*; Yamamoto, Minoru; Nishikino, Masaharu; Oba, Toshiyuki; Kaihori, Takeshi; Imazono, Takashi; et al.
X-Ray Lasers 2010; Springer Proceedings in Physics, Vol.136, p.353 - 358, 2011/12
The understanding of the dynamics of the initial process is important for the micro processing and welding by the ultra-short laser pulse. The X-ray laser is suitable for probing this initial process because it has short wavelength (Ni-like Ag, 13.9 nm) and short duration (7 ps). For this investigation, the origin of time of the pumping pulse is quite important. In this study, we used the scintillation plate and the plasma gate technique to realize the spatial and temporal synchronization of the pump and probe pulses. For the spatial alignment, a CsI scintillation plate that was set at the sample position was illuminated by both the X-ray laser pulse, and the fluorescence light were detected by the CCD camera. For the temporal synchronization, we set a thin foil at the sample position. We measured the transmission of the X-ray laser while changing a temporal delay of the pumping laser with respect to the time of X-ray laser pulse to obtain the origin of the irradiation time.
Hasegawa, Noboru; Ochi, Yoshihiro; Kawachi, Tetsuya; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Kaihori, Takeshi; Sasaki, Akira; Terakawa, Kota*; Minami, Yasuo*; et al.
Proceedings of SPIE, Vol.8140, p.81400G_1 - 81400G_8, 2011/10
Times Cited Count：3 Percentile：82.2(Engineering, Electrical & Electronic)We have developed a soft X-ray laser (SXRL) interferometer capable of the single-shot imaging of nano-scaled structure dynamics. The interferometer consisted of the reflection optics including double Lloyd's mirrors and focusing optics, and the interference fringes are produced on the detector surface. By using this interferometer, the initial stage (
50 ps) of the ablation process of the Pt surface pumped by a 70 fs Ti:Sapphire laser pulse was observed. The expansion speed of the surface estimated from the result (34 nm/50 ps) indicated that the nano-bubble structures were formed in the initial stage of the ablation. In order to observe the detailed dynamics, the temporal synchronization between the pump and probe pulses was improved to be 3 ps by adopting a portion of the SXRL and pump beams as the time fiducials, to which the pump and probe timing was adjusted by using the X-ray streak camera.
Yamamoto, Minoru; Hasegawa, Noboru; Terakawa, Kota*; Umeda, Yoshifumi*; Tomita, Takuro*; Ochi, Yoshihiro; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Kaihori, Takeshi; et al.
Proceedings of 12th International Symposium on Laser Precision Microfabrication (LPM 2011) (Internet), 4 Pages, 2011/06
Femtosecond lasers have been used for material processing. However, the physical processes responsible for femtosecond laser ablation have not been understood completely. These processes involve melting, vaporization, re-solidification or ablation, which occur in a very short time from pico- to nano-seconds. To understand the physical processes, it is essential to reveal the dynamics of ultrafast surface morphological change after laser irradiation. At JAEA, the laser-driven plasma soft X-ray laser (SXRL) that has extremely high spatial and spectral purity was constructed. It delivers soft X-ray photons at 89.2 eV (13.9 nm) with a photon number of exceeding 
, which is sufficient to obtain a single shot interferogram. By using this system, the soft X-ray laser interferometer with the lateral resolution of 1.8 m and a depth resolution of 1 nm was developed. We report on demonstration of time-resolved measurement of femtosecond-laser ablation dynamics by using the soft X-ray laser interferometer.
Sumiya, Shuichi; Matsuura, Kenichi; Watanabe, Hitoshi; Nakano, Masanao; Takeyasu, Masanori; Fujita, Hiroki; Isozaki, Tokuju; Morisawa, Masato; Mizutani, Tomoko; Kokubun, Yuji; et al.
JAEA-Review 2011-004, 161 Pages, 2011/03
JAEA-Review-2011-004.pdf:4.09MB
Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2009 to March 2010. Appendices present comprehensive information, such as monitoring program, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes.
Yanagie, Hironobu*; Kumada, Hiroaki*; Nakamura, Takemi; Higashi, Shushi*; Ikushima, Ichiro*; Morishita, Yasuyuki*; Shinohara, Atsuko*; Fujiwara, Mitsuteru*; Suzuki, Minoru*; Sakurai, Yoshinori*; et al.
Proceedings of 14th International Congress on Neutron Capture Therapy (ICNCT-14) (CD-ROM), p.157 - 160, 2010/10
Kobayashi, Takayuki; Isayama, Akihiko; Fasel, D.*; Yokokura, Kenji; Shimono, Mitsugu; Hasegawa, Koichi; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; et al.
Journal of Plasma and Fusion Research SERIES, Vol.9, p.363 - 368, 2010/08
Improvements are required for expanding the pulse length of the JT-60 ECRF system (5s) for JT-60SA (100s). Newly developed power supplies will be fabricated and installed by EU. The conditioning operation of an improved gyrotron equipping a newly designed mode convertor has been started. The mode convertor will reduce heat flux on the internal components and therefore expected to enable long pulse operation at 1 MW. Pre-programmed and/or feedback control of the heater current and anode voltage, which was successfully demonstrated in JT-60U, will be key techniques because the beam current decreases during a shot. The evacuated transmission lines have a capability of 1 MW per line. Since maintenance of the components in the vacuum vessel is difficult, a linear motion antenna concept was proposed to reduce risks of water leakage and fault of the driving mechanism in the vacuum vessel. The detailed design and the low power test of a mock-up antenna have been started.
