Estimation of temporal variation of tritium inventory discharged from the port of Fukushima Dai-ichi Nuclear Power Plant; Analysis of the temporal variation and comparison with released tritium inventories from Japan and world major nuclear facilities

Machida, Masahiko; Iwata, Ayako; Yamada, Susumu; Otosaka, Shigeyoshi*; Kobayashi, Takuya; Funasaka, Hideyuki*; Morita, Takami*

Journal of Nuclear Science and Technology, 60(3), p.258 - 276, 2023/03

https://doi.org/10.1080/00223131.2022.2093800

We estimate monthly discharge inventory of tritium from the port of Fukushima Dai-ichi Nuclear Power Plant (1F) from Jun. 2013 to Mar. 2020 using the Voronoi tessellation scheme, following the tritium monitoring results inside the port started in Jun. 2013. As for the missing period from the first month of 1F accident, Apr. 2011 to May 2013, we calculate the tritium discharge inventory by utilizing the concentration ratio of tritium to Cs in stagnant contaminant water during the initial direct run-off period until Jun. 2011 and the discharge inventory correlation between tritium and Cs for the next-unknown continuous-discharge period from Jul. 2011 to May 2013. From all the estimated results over 9 years, we find that the monthly discharge inventory sharply dropped immediately after closing the seaside impermeable wall in Oct. 2015 and consequently coincided well with the sum of input inventories of drainage water and subdrain etc. purified water into the port. By comparing the above estimated results with those in the normal operation period before the accident, we point out that the discharge inventory from 1F port after the accident is not so large. Even the estimation value for the accident year 2011 is found to be comparable to the maximum of operating pressurized water reactors releasing relatively large inventories in the order. At the national level, the total domestic release inventory in Japan significantly decreased after the accident owing to the operational shutdown of most plants. Furthermore, the total Japanese discharge inventory including 1F are found to be minor compared with those of nuclear reprocessing plants and heavy-water reactors on a worldwide level. From the above results, we suggest that various scenarios can be openly discussed regarding the management of tritium stored inside 1F with the help of the present estimated data and its comparison with the past discharge inventory as well as those of other nuclear facilities.

Development of "MOX weighing and Ball-mill blending" based on experience in operation and maintenance of MOX fuel manufacturing equipment

Kawasaki, Kohei; Ono, Takanori; Shibanuma, Kimikazu; Goto, Kenta; Aita, Takahiro; Okamoto, Naritoshi; Shinada, Kenta; Ichige, Hidekazu; Takase, Tatsuya; Osaka, Yuki; et al.

JAEA-Technology 2022-031, 91 Pages, 2023/02

JAEA-Technology-2022-031.pdf:6.57MB

The document for back-end policy opened to the public in 2018 by Japan Atomic Energy Agency (hereafter, JAEA) states the decommissioning of facilities of Nuclear Fuel Cycle Engineering Laboratories and JAEA have started gathering up nuclear fuel material of the facilities into Plutonium Fuel Production Facilities (hereafter, PFPF) in order to put it long-term, stable and safe storage. Because we planned to manufacture scrap assemblies almost same with Monju fuel assembly using unsealed plutonium-uranium mixed-oxide (hereafter, MOX) powder held in PFPF and transfer them to storage facilities as part of this "concentration" task of nuclear fuel material, we obtained permission to change the use of nuclear fuel material in response to the new regulatory Requirements in Japan for that. The amount of plutonium (which is neither sintered pellets nor in a lidded powder-transport container) that could be handled in the pellet-manufacturing process was limited to 50 kg Pu or less in order to decrease the facility risk in this manufacture. Therefore, we developed and installed the "MOX weighing and blending equipment" corresponding with small batch sizes that functioned in a starting process and the equipment would decrease handling amounts of plutonium on its downstream processes. The failure data based on our operation and maintenance experiences of MOX fuel production facilities was reflected in the design of the equipment to further improve reliability and maintainability in this development. The completed equipment started its operation using MOX powder in February 2022 and the design has been validated through this half-a-year operation. This report organizes the knowledge obtained through the development of the equipment, the evaluation of the design based on the half-a-year operation results and the issues in future equipment development.

Distribution, dynamics, and fate of radiocesium derived from FDNPP accident in the ocean

Otosaka, Shigeyoshi*; Kamidaira, Yuki; Ikenoue, Tsubasa; Kawamura, Hideyuki

Journal of Nuclear Science and Technology, 59(4), p.409 - 423, 2022/04

https://doi.org/10.1080/00223131.2021.1994480

After the accident at Fukushima Daiichi Nuclear Power Plant (FDNPP), many oceanographic observations were carried out from various perspectives. Numerical simulations were also effectively applied to understand the distribution of radionunclides. By integrating these results, the dynamics of the accident-derived radionuclides in the ocean were highlighted. The transport processes of the accident-derived radionuclides to the ocean include (1) direct discharge to the ocean, (2) deposition in the ocean via the atmosphere, and (3) inflow from rivers after deposition to the land surface. In the case of Cs, one of major accident-derived radionuclides, most of the supply to the ocean immediately after the accident (8-21 PBq) was estimated to be due to processes (1) and (2). The amount of Cs accumulated on the seafloor is only about 1% (0.2PBq) of the amount carried to the ocean, but it remains in the sediments in the coastal area for a long period of time and gradually migrates to the seawater and ecosystems near the seafloor.

KeV-region analysis of the neutron capture cross-section of Np

Rovira Leveroni, G.; Katabuchi, Tatsuya*; Tosaka, Kenichi*; Matsuura, Shota*; Kodama, Yu*; Nakano, Hideto*; Iwamoto, Osamu; Kimura, Atsushi; Nakamura, Shoji; Iwamoto, Nobuyuki

Journal of Nuclear Science and Technology, 59(1), p.110 - 122, 2022/01

https://doi.org/10.1080/00223131.2021.1954104

Summary results of subsidy program for the "Project of Decommissioning and Contaminated Water Management (Development of Analysis and Estimation Technology for Characterization of Fuel Debris (Development of Technologies for Enhanced Analysis Accuracy and Thermal Behavior Estimation of Fuel Debris))"

Koyama, Shinichi; Nakagiri, Toshio; Osaka, Masahiko; Yoshida, Hiroyuki; Kurata, Masaki; Ikeuchi, Hirotomo; Maeda, Koji; Sasaki, Shinji; Onishi, Takashi; Takano, Masahide; et al.

Hairo, Osensui Taisaku jigyo jimukyoku Homu Peji (Internet), 144 Pages, 2021/08

https://dccc-program.jp/3797

JAEA performed the subsidy program for the "Project of Decommissioning and Contaminated Water Management (Development of Analysis and Estimation Technology for Characterization of Fuel Debris (Development of Technologies for Enhanced Analysis Accuracy and Thermal Behavior Estimation of Fuel Debris))" in 2020JFY. This presentation summarized briefly the results of the project, which will be available shortly on the website of Management Office for the Project of Decommissioning and Contaminated Water Management.

Seven-year temporal variation of caesium-137 discharge inventory from the port of Fukushima Daiichi Nuclear Power Plant; Continuous monthly estimation of caesium-137 discharge in the period from April 2011 to June 2018

Machida, Masahiko; Yamada, Susumu; Iwata, Ayako; Otosaka, Shigeyoshi; Kobayashi, Takuya; Watanabe, Masahisa; Funasaka, Hideyuki; Morita, Takami*

Journal of Nuclear Science and Technology, 57(8), p.939 - 950, 2020/08

https://doi.org/10.1080/00223131.2020.1740809

After direct discharges of highly contaminated water of the Fukushima Daiichi Nuclear Power Plant (1F) from April to May 2011, Kanda suggested that relatively small amounts of run-off of radionuclides from the 1F port into the Fukushima coastal region subsequently continued by his estimation method. However, the estimation period was limited to up to September 2012. Therefore, this paper estimates the discharge inventory up to June 2018. In the missing period, the Japanese government and Tokyo Electric Power Company Holdings have continued efforts to stop the discharge, and consequently, the radionuclide concentration in seawater inside the 1F port has gradually diminished. We show the monthly discharge inventory of Cs up to June 2018 by two methods, i.e., Kanda method partially improved by the authors and a more sophisticated method using Voronoi tessellation reflecting the increase in the number of monitoring points inside the 1 F port. The results show that the former always yields overestimated results compared with the latter, but the ratio of the former to the latter is less than one order of magnitude. Using these results, we evaluate the impact of the discharge inventory from the 1F port into the coastal area and radiation dose upon fish ingestion.

Expansion of high temperature creep test data for failure evaluation of BWR lower head in severe accident

Yamaguchi, Yoshihito; Katsuyama, Jinya; Kaji, Yoshiyuki; Osaka, Masahiko; Li, Y.

Mechanical Engineering Journal (Internet), 7(3), p.19-00560_1 - 19-00560_12, 2020/06

https://doi.org/10.1299/mej.19-00560

Since the Fukushima Daiichi Nuclear Power Plant accident, we have been developing a failure evaluation method that considers creep damage mechanisms using detailed three-dimensional finite element analysis model of lower head including penetration, stub tubes, and weld parts, etc., for the early completion of the decommissioning of the nuclear power plants in Fukushima Daiichi. For the finite element analysis, we have been obtaining material properties for which no data are provided in existing databases or in the literature. In particular, creep data corresponding to the high temperature region near the melting point of materials is important in evaluating creep deformation under severe accident conditions. In this study, we obtained the uniaxial tensile and creep properties for low-alloy steel, stainless steel, and Ni-based alloy. In particular, creep test data with long rupture times at high temperatures are expanded using a tensile test machine that can measure the elongation of test specimens in a noncontact measurement system. The parameters related to the failure evaluation were improved on the basis of the expanded creep database.

Neutron capture cross-section measurement and resolved resonance analysis of Np

Rovira, G.*; Katabuchi, Tatsuya*; Tosaka, Kenichi*; Matsuura, Shota*; Terada, Kazushi*; Iwamoto, Osamu; Kimura, Atsushi; Nakamura, Shoji; Iwamoto, Nobuyuki; Segawa, Mariko; et al.

Journal of Nuclear Science and Technology, 57(1), p.24 - 39, 2020/01

https://doi.org/10.1080/00223131.2019.1651231

Repeatability and reproducibility of measurements of low dissolved radiocesium concentrations in freshwater using different pre-concentration methods

Kurihara, Momo*; Yasutaka, Tetsuo*; Aono, Tatsuo*; Ashikawa, Nobuo*; Ebina, Hiroyuki*; Iijima, Takeshi*; Ishimaru, Kei*; Kanai, Ramon*; Karube, Jinichi*; Konnai, Yae*; et al.

Journal of Radioanalytical and Nuclear Chemistry, 322(2), p.477 - 485, 2019/11

https://doi.org/10.1007/s10967-019-06696-2

We assessed the repeatability and reproducibility of methods for determining low dissolved radiocesium concentrations in freshwater in Fukushima. Twenty-one laboratories pre-concentrated three of 10 L samples by five different pre-concentration methods (prussian-blue-impregnated filter cartridges, coprecipitation with ammonium phosphomolybdate, evaporation, solid-phase extraction disks, and ion-exchange resin columns), and activity of radiocesium was measured. The z-scores for all of the Cs results were within 2, indicating that the methods were accurate. The relative standard deviations (RSDs) indicating the variability in the results from different laboratories were larger than the RSDs indicating the variability in the results from each separate laboratory.

Development of evaluation method for variability of groundwater flow conditions associated with long-term topographic change and climate perturbations

Onoe, Hironori; Kosaka, Hiroshi*; Matsuoka, Toshiyuki; Komatsu, Tetsuya; Takeuchi, Ryuji; Iwatsuki, Teruki; Yasue, Kenichi

Genshiryoku Bakkuendo Kenkyu (CD-ROM), 26(1), p.3 - 14, 2019/06

https://doi.org/10.3327/jnuce.26.1_3

In this study, it is focused on topographic changes due to uplift and denudation, also climate perturbations, a method which is able to assess the long-term variability of groundwater flow conditions using the coefficient variation based on some steady-state groundwater flow simulation results was developed. Spatial distribution of long residence time area which is not much influenced due to long-term topographic change and recharge rate change during the past one million years was able to estimate through the case study of the Tono area, Central Japan. By applying this evaluation method, it is possible to identify the local area that has low variability of groundwater flow conditions due to topographic changes and climate perturbations from the regional area quantitatively and spatially.