First observation of O

Kondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.

Nature, 620(7976), p.965 - 970, 2023/08

https://doi.org/10.1038/s41586-023-06352-6

no abstracts in English

Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

High temperature mechanical properties and microstructure in 9Cr or 12Cr oxide dispersion strengthened steels

Mitsuhara, Masatoshi*; Kurino, Koichi*; Yano, Yasuhide; Otsuka, Satoshi; Toyama, Takeshi*; Onuma, Masato*; Nakashima, Hideharu*

Tetsu To Hagane, 109(3), p.189 - 200, 2023/03

https://doi.org/10.2355/tetsutohagane.TETSU-2022-080

Oxide Dispersion Strengthened (ODS) ferritic steel, a candidate material for fast reactor fuel cladding, has low thermal expansion, good thermal conductivity, and excellent resistance to irradiation damage and high temperature strength. The origin of the excellent high-temperature strength lies in the dispersion of fine oxides. In this study, creep tests at 700 or 750C, which are close to the operating temperatures of fast reactors, and high-temperature tensile tests at 900 to 1350 C, which simulate accident conditions, were conducted on 9Cr ODS ferritic steels, M11 and MP23, and 12Cr ODS ferritic steel, F14, to confirm the growth behavior of oxides. In the M11 and F14 creep test samples, there was little oxide growth or decrease in number density from the initial state, indicating that dispersion strengthening by oxides was effective during deformation. After creep deformation of F14, the development of dislocation substructures such as dislocation walls and subgrain boundaries was hardly observed, and mobile dislocations were homogeneously distributed in the grains. The dislocation density increased with increasing stress during the creep test. In the high-temperature ring tensile tests of MP23 and F14, the strength of both steels decreased at higher temperatures. In MP23, elongation decreased with increasing test temperature from 900 to 1100 C, but increased at 1200 C, decreased drastically at 1250 C, and increased again at 1300 C. In F14, elongation decreased with increasing temperature. It was inferred that the formation of the -ferrite phase was responsible for this complex change in mechanical properties of MP23 from 1200 to 1300 C.

Tensile properties of modified 316 stainless steel (PNC316) after neutron irradiation over 100 dpa

Yano, Yasuhide; Uwaba, Tomoyuki; Tanno, Takashi; Yoshitake, Tsunemitsu; Otsuka, Satoshi; Kaito, Takeji

Journal of Nuclear Science and Technology, 9 Pages, 2023/00

https://doi.org/10.1080/00223131.2023.2243943

The effects of fast neutron irradiation on tensile properties of modified 316 stainless steel (PNC316) claddings and wrappers for fast reactors were investigated. PNC316 claddings and wrappers were irradiated in the experimental fast reactor Joyo at irradiation temperatures between 400 and 735 C to fast neutron doses ranging from 21 to 125 dpa. The post-irradiation tensile tests were carried out at room and irradiation temperatures. Elongations of PNC316 measured by the tensile tests were maintained at an engineering level, although the material incurred significant irradiation hardening and softening. The maximum swelling of PNC316 wrappers was about 2.5 vol.% at irradiation temperature between 400 and 500C up to 110 dpa. Japanese 20% cold-worked austenitic steels, PNC316 and 15Cr-20Ni, had sufficient ductility and work-hardenability even after above 10 vol.% swelling, while they had very weak plastic instabilities.

Evaluation of tensile and creep properties on 9Cr-ODS steel claddings

Yano, Yasuhide; Hashidate, Ryuta; Tanno, Takashi; Imagawa, Yuya; Kato, Shoichi; Onizawa, Takashi; Ito, Chikara; Uwaba, Tomoyuki; Otsuka, Satoshi; Kaito, Takeji

JAEA-Data/Code 2021-015, 64 Pages, 2022/01

JAEA-Data-Code-2021-015.pdf:2.6MB

From a view point of practical application of fast breeder reactor cycles, which takes advantage of safety and economic efficiency and makes a contribution of volume reduction and mitigation of degree of harmfulness of high-level radioactive waste, it is necessary to develop fuel cladding materials for fast reactors (FRs) in order to achieve high-burnup. Oxide dispersion strengthened (ODS) steel have been studied for use as potential fuel cladding materials in FRs owing to their excellent resistance to swelling and their high-temperature strength in Japan Atomic Energy Agency. It is very important to establish the materials strength standard in order to apply ODS steels as a fuel cladding. Therefore, it is necessary to acquire the mechanical properties such as tensile, creep rupture strength tests and so on. In this study, tensile and creep rupture strengths of 9Cr-ODS steel claddings were evaluated using by acquired these data. Because of the phase transformation temperature of 9Cr-ODS steel, temperature range for the evaluation was divided into two ones at AC1 transformation temperature of 850C.

Tensile properties on dissimilar welds between 11Cr-ferritic/martensitic steel and 316 stainless steel after thermal aging

Yano, Yasuhide; Tanno, Takashi; Oka, Hiroshi; Otsuka, Satoshi; Kaito, Takeji

Journal of Nuclear Materials, 555, p.153105_1 - 153105_8, 2021/11

https://doi.org/10.1016/j.jnucmat.2021.153105

The aim of this study was to evaluate the tensile properties and microstructures of dissimilar welds between 11Cr-ferritic/martensitic steel and 316 stainless steel after thermal aging at temperatures between 400 and 600C up to 30,000 h. Characterization of microstructure was carried out by scanning electron microscopy and transmission electron microscopy. Microstructural analysis showed that the microstructure in the weld metals consisted of lath martensite containing a small amount of residual austenite. Thermal aging hardening of WMs occurred at 400 and 450C due to the effects of both a-a' phase separation and G-phase precipitation. However, there was no significant change in the total elongation, and fracture surfaces indicated that very fine dimpled rupture was predominant rather than the cleavage rupture. It was suggested that lath martensite phases enhanced the tensile strength due to phase separation, while residual austenite played a role in keeping elongation as a soft phase.

Effects of thermal aging on the mechanical properties of FeCrAl-ODS alloy claddings

Yano, Yasuhide; Tanno, Takashi; Otsuka, Satoshi; Kaito, Takeji; Ukai, Shigeharu*

Materials Transactions, 62(8), p.1239 - 1246, 2021/08

https://doi.org/10.2320/matertrans.MT-M2021057

The FeCrAl-ODS alloy claddings were manufactured and Vickers hardness, ring tensile tests and TEM observations of these claddings were performed to investigate the effects of thermal aging at 450 C for 5,000 and 15,000 h. The age-hardening of all FeCrAl-ODS alloy cladding was found. In addition, the significant increase in tensile strength was accompanied by much larger loss of ductility. It was suggested that this age-hardening behavior was attributed to the (Ti, Al)-enriched phase (' phase) and the ' phase precipitates (content of Al is 7 wt%). In comparison with FeCrAl-ODS alloys with almost same chemical compositions, there was significant age-hardening in both alloys. However, the extrusion bar with no-recrystallized structures was keeping good ductility. It was suggested that this different behavior of reduction ductility was attributed to the effects of grain boundaries, dislocation densities and specimen preparation direction.

Microstructural stability of ODS steel after very long-term creep test

Oka, Hiroshi; Tanno, Takashi; Yano, Yasuhide; Otsuka, Satoshi; Kaito, Takeji; Tachi, Yoshiaki

Journal of Nuclear Materials, 547, p.152833_1 - 152833_7, 2021/04

https://doi.org/10.1016/j.jnucmat.2021.152833

In order to evaluate the stability of nano-sized oxide particles and matrix structure of ODS cladding tube, which are the determinants of their high temperature strength, the microstructural observation was carried out after internal pressurized creep test at 700C for over 45,000 hours. The specimens were the as-received and crept specimens of 9Cr-ODS steel with tempered martensite and 12Cr-ODS steel with recrystallized ferrite. Small platelet was cut out from the crept pressurized tube, then thinned to foil. Microstructural observation was conducted with TEM JEOL 2010F. As a result of the observation, it was confirmed that the size and number density of the nano-sized particles were almost unchanged even after the creep test. In addition, the tempered martensite structure, which is one of the determinants of the creep strength of 9Cr-ODS steel, was not significantly different between the as-received and crept specimen, indicating the stability of their matrix structure.

Evaluation of breach characteristics of fast reactor fuel pins during steady state irradiation

Oka, Hiroshi*; Kaito, Takeji; Ikusawa, Yoshihisa; Otsuka, Satoshi

Nuclear Engineering and Design, 370, p.110894_1 - 110894_8, 2020/12

https://doi.org/10.1016/j.nucengdes.2020.110894

The objective of this study is to evaluate the reliability of a cumulative damage fraction (CDF) analysis for the prediction of fuel pin breach in fast rector using experimentally obtained fuel pin breach data for the first time. Six breached fuel pins were obtained from steady state irradiation in the EBR-II. Post irradiation examinations revealed that FP gas pressure was the main cause of creep damage in cladding, and that the stress contribution from FCMI was negligible. CDFs evaluated for these pins using in-reactor creep rupture equation, taking into account the irradiation history of cladding temperature and hoop stress due to FP gas pressure, were in the range of 0.7 to 1.4 at the occurrence of breach. This shows clearly that fuel pin breach occurs when the CDF approaches 1.0. The results indicate that CDF analysis would be a reliable method for the prediction of fuel pin breach when appropriate material strength and environmental effects are adopted.

Oxide dispersion strengthened steels

Ukai, Shigeharu*; Ono, Naoko*; Otsuka, Satoshi

Comprehensive Nuclear Materials, 2nd Edition, Vol.3, p.255 - 292, 2020/08

https://doi.org/10.1016/B978-0-12-803581-8.11718-7

Fe-Cr-based oxide dispersion strengthened (ODS) steels have a strong potential for high burnup (long-life) and high-temperature applications typical for SFR fuel cladding. Current progress in the development of Fe-Cr-based ODS steel claddings is reviewed, including their relevant mechanical properties, e.g. tensile and creep rupture strengths in the hoop directions. In addition, this paper reviewed the current research status on corrosion resistant Fe-Cr-Al-based ODS steel claddings, which are greatly paid attention recently as the accident tolerant fuel claddings for the light water reactor (LWR) and also as the claddings of the lead fast reactors (LFR) utilizing Pb-Bi eutectic (LBE) coolant.