Investigation of the electronic structure of the MgZnY alloy using X-ray photoelectron spectroscopy

Miyazaki, Hidetoshi*; Akatsuka, Tatsuyoshi*; Kimura, Koji*; Egusa, Daisuke*; Sato, Yohei*; Itakura, Mitsuhiro; Takagi, Yasumasa*; Yasui, Akira*; Ozawa, Kenichi*; Mase, Kazuhiko*; et al.

Materials Transactions, 64(6), p.1194 - 1198, 2023/06

https://doi.org/10.2320/matertrans.MT-MD2022019

We investigated the electronic structure of the MgZnY alloy using hard and soft X-ray photoemission spectroscopy and electronic band structure calculations to understand the mechanism of the phase stability of this material. Electronic structure of the MgZnY alloy showed a semi-metallic electronic structure with a pseudo-gap at the Fermi level. The observed electronic structure of the MgZnY alloy suggests that the presence of a pseudogap structure is responsible for phase stability.

Development of technologies for enhanced analysis accuracy of fuel debris; Summary results of the 2020 fiscal year (Subsidy program for the project of decommissioning and contaminated water management)

Ikeuchi, Hirotomo; Koyama, Shinichi; Osaka, Masahiko; Takano, Masahide; Nakamura, Satoshi; Onozawa, Atsushi; Sasaki, Shinji; Onishi, Takashi; Maeda, Koji; Kirishima, Akira*; et al.

JAEA-Technology 2022-021, 224 Pages, 2022/10

JAEA-Technology-2022-021.pdf:12.32MB

A set of technology, including acid dissolving, has to be established for the analysis of content of elements/nuclides in the fuel debris samples. In this project, a blind test was performed for the purpose of clarifying the current level of analytical accuracy and establishing the alternative methods in case that the insoluble residue remains. Overall composition of the simulated fuel debris (homogenized powder having a specific composition) were quantitatively determined in the four analytical institutions in Japan by using their own dissolving and analytical techniques. The merit and drawback for each technique were then evaluated, based on which a tentative flow of the analyses of fuel debris was constructed.

Development and operation of an electrostatic time-of-flight detector for the Rare RI storage Ring

Nagae, Daisuke*; Abe, Yasushi*; Okada, Shunsuke*; Omika, Shuichiro*; Wakayama, Kiyoshi*; Hosoi, Shun*; Suzuki, Shinji*; Moriguchi, Tetsuro*; Amano, Masamichi*; Kamioka, Daiki*; et al.

Nuclear Instruments and Methods in Physics Research A, 986, p.164713_1 - 164713_7, 2021/01

https://doi.org/10.1016/j.nima.2020.164713

Pretreatment works for disposal of radioactive wastes produced by research activities, 1

Ishihara, Keisuke; Yokota, Akira; Kanazawa, Shingo; Iketani, Shotaro; Sudo, Tomoyuki; Myodo, Masato; Irie, Hirobumi; Kato, Mitsugu; Iseda, Hirokatsu; Kishimoto, Katsumi; et al.

JAEA-Technology 2016-024, 108 Pages, 2016/12

JAEA-Technology-2016-024.pdf:29.74MB

Radioactive isotope, nuclear fuel material and radiation generators are utilized in research institutes, universities, hospitals, private enterprises, etc. As a result, various low-level radioactive wastes (hereinafter referred to as non-nuclear radioactive wastes) are produced. Disposal site for non-nuclear radioactive wastes have not been settled yet and those wastes are stored in storage facilities of each operator for a long period. The Advanced Volume Reduction Facilities (AVRF) are built to produce waste packages so that they satisfy requirements for shallow underground disposal. In the AVRF, low-level beta-gamma solid radioactive wastes produced in the Nuclear Science Research Institute are mainly treated. To produce waste packages meeting requirements for disposal safely and efficiently, it is necessary to cut large radioactive wastes into pieces of suitable size and segregate those depending on their types of material. This report summarizes activities of pretreatment to dispose of non-nuclear radioactive wastes in the AVRF.

Evaluation of damage accumulation behavior and strength anisotropy of NITE SiC/SiC composites by acoustic emission, digital image correlation and electrical resistivity monitoring

Nozawa, Takashi; Ozawa, Kazumi; Asakura, Yuki*; Koyama, Akira*; Tanigawa, Hiroyasu

Journal of Nuclear Materials, 455(1-3), p.549 - 553, 2014/12

https://doi.org/10.1016/j.jnucmat.2014.08.043

SiC/SiC composite is a promising candidate material of fusion DEMO reactor. This paper aims to identify its damage tolerance and strength anisotropy by various characterization techniques such as acoustic emission (AE) monitoring, electrical resistivity (ER) measurement, and digital image correlation (DIC). The AE results identified that damage accumulation initiated prior to the proportional limit stress (PLS) by both tensile and compressive loadings for 2D composites. The preliminary AE waveform analysis implied that this AE detect strength corresponds to initiation of micro-cracking but the stress-strain curve shows further linearity due to the strong interfacial friction. Then fiber sliding occurred near the PLS, followed by the non-linearlity of the curve. The preliminary tensile test results using a notched specimen also suggest notch insensitivity of the composites in any loading directions. The detailed failure mechanism will eventually be discussed with ER and DIC results.

A Multi-reflection time-of-flight mass spectrograph for short-lived and super-heavy nuclei

Schury, P. H.*; Wada, Michiharu*; Ito, Yuta*; Naimi, S.*; Sonoda, Tetsu*; Mita, Koki*; Takamine, Aiko*; Okada, Kunihiro*; Wollnik, H.*; Chon, S.*; et al.

Nuclear Instruments and Methods in Physics Research B, 317(Part B), p.537 - 543, 2013/12

https://doi.org/10.1016/j.nimb.2013.06.025

A multi-reflection time-of-flight (MRTOF) mass spectrograph has been implemented at RIKEN to provide high-precision mass measurements of very short-lived nuclei. Of particular interest are mass measurements of r-process nuclei and trans-uranium nuclei. In such nuclei, the MRTOF can perform on par with or better than traditional Penning trap systems. We demonstrate that the MRTOF-MS is capable of accurately attaining relative mass precision of m/m 10 and describe it's utility with heavy, short-lived nuclei.

New result in the production and decay of an isotope, 113 of the 113th element

Morita, Kosuke*; Morimoto, Koji*; Kaji, Daiya*; Haba, Hiromitsu*; Ozeki, Kazutaka*; Kudo, Yuki*; Sumita, Takayuki*; Wakabayashi, Yasuo*; Yoneda, Akira*; Tanaka, Kengo*; et al.

Journal of the Physical Society of Japan, 81(10), p.103201_1 - 103201_4, 2012/10

https://doi.org/10.1143/JPSJ.81.103201

An isotope of the 113th element, 113, was produced in a nuclear reaction with a Zn beam on a Bi target. We observed six consecutive decays following the implantation of a heavy particle in nearly the same position in the semiconductor detector, in extremely low background condition. The fifth and sixth decays are fully consistent with the sequential decays of Db and Lr both in decay energies and decay times. This indicates that the present decay chain consisted of 113, Rg (Z = 111), Mt (Z = 109), Bh (Z = 107), Db (Z = 105), and Lr (Z = 103) with firm connections. This result, together with previously reported results from 2004 and 2007, conclusively leads the unambiguous production and identification of the isotope 113, of the 113th element.

Development of ion beam breeding technology in plants and creation of useful plant resources

Hase, Yoshihiro; Nozawa, Shigeki; Okada, Tomoyuki*; Asami, Itsuo*; Nagatani, Takeshi*; Matsuo, Yoichi*; Kanazawa, Akira*; Honda, Kazushige*; Narumi, Issei

JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 100, 2012/01

https://jopss.jaea.go.jp/pdfdata/JAEA-Review-2011-043.pdf

Recent progress in blanket materials development in the Broader Approach Activities

Nishitani, Takeo; Tanigawa, Hiroyasu; Nozawa, Takashi; Jitsukawa, Shiro; Nakamichi, Masaru; Hoshino, Tsuyoshi; Yamanishi, Toshihiko; Baluc, N.*; Mslang, A.*; Lindou, R.*; et al.

Journal of Nuclear Materials, 417(1-3), p.1331 - 1335, 2011/10

https://doi.org/10.1016/j.jnucmat.2010.12.304

As a part of the Broader Approach (BA) activities, the research and development on blanket related materials and tritium technology have been initiated toward DEMO by Japan and EU. Recently, those five R&D items have progressed substantially in Japan and EU. As a preparatory work aiming at the RAFM steel muss-production development, a 5-ton heat of RAFM steel (F82H) was procured with the Electro Slag Re-melting as a secondary melting. The result of the double notch tensile test method for the NITE-SiC/SiC specimen indicated notch insensitivity and very minor size effect on proportional limit tensile stress and fracture strength. For the fabrication technology development of beryllide neutron multiplayer pebbles, Be- Ti inter-metallic pebbles have been sintered directly from the mixed powder of Be and Ti in Japan.

Production and decay properties of Hs and Hs

Sato, Nozomi; Haba, Hiromitsu*; Ichikawa, Takatoshi*; Kaji, Daiya*; Kudo, Yuki*; Morimoto, Koji*; Morita, Kosuke*; Ozeki, Kazutaka*; Sumita, Takayuki*; Yoneda, Akira*; et al.

Journal of the Physical Society of Japan, 80(9), p.094201_1 - 094201_7, 2011/09

https://doi.org/10.1143/JPSJ.80.094201

Decay properties of Hs and Hs produced in the Pb(Fe, ) [=1, 2] reactions were studied using a gas-filled recoil ion separator at the linear accelerator facility of RIKEN. A total of 6 decay chains were assigned to Hs. Cross sections for the Hs production in the Pb(Fe,) and Pb(Fe,) reactions were measured to be pb and pb, respectively. The isotope Hs decayed with a half-life of ms by -particle emission and spontaneous fission. The -particle energy of Hs was observed at 10.610.04 and 10.800.08 MeV. The spontaneous fission branch of Hs was found to be .