Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Luce, T. C.*; Challis, C. D.*; Ide, Shunsuke; Joffrin, E.*; Kamada, Yutaka; Politzer, P. A.*; Schweinzer, J.*; Sips, A. C. C.*; Stober, J.*; Giruzzi, G.*; et al.
Nuclear Fusion, 54(1), p.013015_1 - 013015_15, 2013/12
Times Cited Count：33 Percentile：83.58(Physics, Fluids & Plasmas)Wiesen, S.*; Brezinsek, S.*; J
rvinen, A.*; Eich, T.*; Fundamenski, W.*; Huber, A.*; Parail, V.*; Corrigan, G.*; Hayashi, Nobuhiko; JET-EFDA Contributors*
Plasma Physics and Controlled Fusion, 53(12), p.124039_1 - 124039_12, 2011/12
Times Cited Count：22 Percentile：67.34(Physics, Fluids & Plasmas)Urano, Hajime; Saibene, G.*; Oyama, Naoyuki; Parail, V.*; de Vries, P.*; Sartori, R.*; Kamada, Yutaka; Kamiya, Kensaku; Loarte, A.*; L
nnroth, J.*; et al.
Nuclear Fusion, 51(11), p.113004_1 - 113004_10, 2011/11
Times Cited Count：10 Percentile：41.01(Physics, Fluids & Plasmas)The effect of TF ripple on the edge pedestal characteristics are examined in JET and JT-60U. By the installation of ferritic inserts, TF ripple was reduced from 
to 
in JT-60U. In JET, TF ripple was varied from 
to by feeding different currents to TF coils. The pedestal pressure was similar with reduced ripple in JT-60U. In JET, no clear difference of the pedestal characteristics was also observed. The edge toroidal rotation clearly decreased in counter direction by increased TF ripple. However, in JT-60U, the ELM frequency decreased by 
and the increased ELM loss power by 
with reduced ripple. In JET, ELM frequency increases only slightly with increased TF ripple. From this inter-machine experiment, TF ripple less than does not strongly affect the pedestal pressure. The effect of TF ripple on pedestal characteristics at lower collisionality close to ITER should be investigated as a next step study.
Hayashi, Nobuhiko; Parail, V.*; Koechl, F.*; Aiba, Nobuyuki; Takizuka, Tomonori; Wiesen, S.*; Lang, P. T.*; Oyama, Naoyuki; Ozeki, Takahisa
Nuclear Fusion, 51(10), p.103030_1 - 103030_8, 2011/10
Times Cited Count：6 Percentile：27.22(Physics, Fluids & Plasmas)Imbeaux, F.*; Citrin, J.*; Hobirk, J.*; Hogeweij, G. M. D.*; Kchl, F.*; Leonov, V. M.*; Miyamoto, Seiji; Nakamura, Yukiharu*; Parail, V.*; Pereverzev, G. V.*; et al.
Nuclear Fusion, 51(8), p.083026_1 - 083026_11, 2011/08
Times Cited Count：35 Percentile：80.59(Physics, Fluids & Plasmas)Litaudon, X.*; Sakamoto, Yoshiteru; de Vries, P. C.*; Salmi, A.*; Tala, T.*; Angioni, C.*; Benkadda, S.*; Beurskens, M. N. A.*; Bourdelle, C.*; Brix, M.*; et al.
Nuclear Fusion, 51(7), p.073020_1 - 073020_13, 2011/07
Times Cited Count：8 Percentile：34.5(Physics, Fluids & Plasmas)A variety of triggering mechanisms and structures of internal transport barrier (ITB) has been observed in various devices or depending on operation scenarios. Thus identity experiments on ITB in JT-60U and JET have been performed to shed light on the physics behind ITBs. Because of their similar size, the dimensionless parameters between both devices are the same. These experiments were performed with near identical magnetic configurations, heating waveforms and normalized quantities such as safety factor, magnetic shear, normalized Larmor radius, normalized collision frequency, beta, temperatures ratio. Similarities of the ITB triggering mechanism and the ITB strength have been observed when a proper match is achieved of the most relevant profiles of the normalized quantities. This paper will report on the detail comparison of transport properties of ITBs obtained in these JET/JT-60U identity experiments.
Hayashi, Nobuhiko; Parail, V.*; Koechl, F.*; Aiba, Nobuyuki; Takizuka, Tomonori; Wiesen, S.*; Lang, P.*; Oyama, Naoyuki; Ozeki, Takahisa; JET-EFDA Contributors*
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03
Murakami, Masanori*; Park, J. M.*; Giruzzi, G.*; Garcia, J.*; Bonoli, P.*; Budny, R. V.*; Doyle, E. J.*; Fukuyama, Atsushi*; Hayashi, Nobuhiko; Honda, Mitsuru; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03
Imbeaux, F.*; Basiuk, V.*; Budny, R.*; Casper, T.*; Citrin, J.*; Fereira, J.*; Fukuyama, Atsushi*; Garcia, J.*; Gribov, Y. V.*; Hayashi, Nobuhiko; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03
Imbeaux, F.*; Basiuk, V.*; Budny, R.*; Casper, T.*; Citrin, J.*; Fereira, J.*; Fukuyama, Atsushi*; Garcia, J.*; Gribov, Y. V.*; Hayashi, Nobuhiko; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2010/10
In order to prepare adequate current ramp-up and ramp-down scenarios for ITER, present experiments from several tokamaks have been analyzed by means of integrated modeling in view of determining relevant heat transport models for these operation phases. The results of these studies are presented and projections to ITER current ramp-up and ramp-down scenarios are done, focusing on the baseline inductive scenario (main heating plateau current of 15 MA). Various transport models have been tested by means of integrated modeling against experimental data from ASDEX Upgrade, C-Mod, DIII-D, JET and Tore Supra, including both Ohmic plasmas and discharges with additional heating/current drive. With using the most successful models, projections to the ITER current ramp-up and ramp-down phases are carried out. Though significant differences between models appear on the electron temperature prediction, the final q-profiles reached in the simulation are rather close.
Hayashi, Nobuhiko; Takizuka, Tomonori; Aiba, Nobuyuki; Oyama, Naoyuki; Ozeki, Takahisa; Wiesen, S.*; Parail, V.*
Nuclear Fusion, 49(9), p.095015_1 - 095015_8, 2009/09
Times Cited Count：15 Percentile：50.06(Physics, Fluids & Plasmas)Sips, A. C. C.*; Casper, T.*; Doyle, E. J.*; Giruzzi, G.*; Gribov, Y.*; Hobirk, J.*; Hogeweij, G. M. D.*; Horton, L. D.*; Hubbard, A. E.*; Hutchinson, I.*; et al.
Nuclear Fusion, 49(8), p.085015_1 - 085015_11, 2009/08
Times Cited Count：53 Percentile：87.31(Physics, Fluids & Plasmas)Key parts of the ITER scenarios are determined by the capability of the proposed poloidal field (PF) coil set. They include the plasma breakdown at low loop voltage, the current rise phase, the performance during the flat top (FT) phase and a ramp down of the plasma. The ITER discharge evolution has been verified in dedicated experiments. New data are obtained from C-Mod, ASDEX Upgrade, DIII-D, JT-60U and JET. Results show that breakdown for 
0.23-0.33 V m
is possible unassisted (ohmic) for large devices like JET and attainable in devices with a capability of using ECRH assist. For the current ramp up, good control of the plasma inductance is obtained using a full bore plasma shape with early X-point formation. This allows optimization of the flux usage from the PF set. Additional heating keeps 
(3) 0.85 during the ramp up to 
= 3. A rise phase with an H-mode transition is capable of achieving (3) 0.7 at the start of the FT. Operation of the H-mode reference scenario at 
3 and the hybrid scenario at = 4-4.5 during the FT phase is documented, providing data for the (3) evolution after the H-mode transition and the (3) evolution after a back-transition to L-mode. During the ITER ramp down it is important to remain diverted and to reduce the elongation. The inductance could be kept 
1.2 during the first half of the current decay, using a slow 
ramp down, but still consuming flux from the transformer. Alternatively, the discharges can be kept in H-mode during most of the ramp down, requiring significant amounts of additional heating.
Shinohara, Koji; Oikawa, Toshihiro; Urano, Hajime; Oyama, Naoyuki; Lnnroth, J.*; Saibene, G.*; Parail, V.*; Kamada, Yutaka
Fusion Engineering and Design, 84(1), p.24 - 32, 2009/01
Times Cited Count：25 Percentile：83.26(Nuclear Science & Technology)Roach, C. M.*; Walters, M.*; Budny, R. V.*; Imbeaux, F.*; Fredian, T. W.*; Greenwald, M.*; Stillerman, J. A.*; Alexander, D. A.*; Carlsson, J.*; Cary, J. R.*; et al.
Nuclear Fusion, 48(12), p.125001_1 - 125001_19, 2008/12
Times Cited Count：35 Percentile：28.57(Physics, Fluids & Plasmas)This paper documents the public release PR08 of the International Tokamak Physics Activity profile database, which should be of particular interest to the magnetic confinement fusion community. Data from a wide variety of interesting discharges from many of the world's leading tokamak experiments are now made available in PR08, which also includes predictive simulations of an initial set of operating scenarios for ITER. In this paper we describe the discharges that have been included and the tools that are available to the reader who is interested in accessing and working with the data.
Hayashi, Nobuhiko; Takizuka, Tomonori; Aiba, Nobuyuki; Oyama, Naoyuki; Ozeki, Takahisa; Wiesen, S.*; Parail, V.*
Proceedings of 22nd IAEA Fusion Energy Conference (FEC 2008) (CD-ROM), 8 Pages, 2008/10
Sips, A. C. C.*; Casper, T. A.*; Doyle, E. J.*; Giruzzi, G.*; Gribov, Y.*; Hobirk, J.*; Hogeweij, G. M. D.*; Horton, L. D.*; Hubbard, A. E.*; Hutchinson, I.*; et al.
Proceedings of 22nd IAEA Fusion Energy Conference (FEC 2008) (CD-ROM), 8 Pages, 2008/10
The ITER discharge evolution has been verified in dedicated experiments. Results show that breakdown at E 0.23-0.32 V/m is possible un-assisted (ohmic) for large devices like JET and attainable in all devices with ECRH assist. For the current ramp up, good control of the plasma inductance is obtained using a full bore plasma shape with early X-point formation. Operation of the H-mode reference scenario at q = 3 and the hybrid scenario at q95=4-4.5 during the flat top phase was documented. Specific studies during the flat top phase provide data for the li evolution after the H-mode transition and the li evolution after a back-transition to L-mode. During the ITER ramp down it is important to remain diverted and to reduce the elongation.
de Vries, P. C.*; Salmi, A.*; Parail, V.*; Giroud, C.*; Andrew, Y.*; Biewer, T. M.*; Cromb
, K.*; Jenkins, I.*; Johnson, T.*; Kiptily, V.*; et al.
Nuclear Fusion, 48(3), p.035007_1 - 035007_6, 2008/03
Times Cited Count：48 Percentile：85.94(Physics, Fluids & Plasmas)Dedicated experiments on TF ripple effects on the performance of tokamak plasmas have been carried out at JET. The TF ripple was found to have a profound effect on the plasma rotation. The central Mach number, M, defined as the ratio of the rotation velocity and the thermal velocity, was found to drop as a function of TF ripple amplitude from an average value of M = 0.40-0.55 for operations at the standard JET ripple of 0.08% to M = 0.25-0.40 for 0.5% ripple and M = 0.1-0.3 for 1% ripple. With standard co-current injection of neutral beam injection (NBI), plasmas were found to rotate in the co-current direction. However, for higher TF ripple amplitudes (
) an area of counter rotation developed at the edge of the plasma, while the core kept its co-rotation.
Oyama, Naoyuki; Saibene, G.*; Kamada, Yutaka; Kamiya, Kensaku; Loarte, A.*; Lnnroth, J.*; Parail, V.*; Sakamoto, Yoshiteru; Salmi, A.*; Sartori, R.*; et al.
Journal of Physics; Conference Series, 123, p.012015_1 - 012015_13, 2008/00
Times Cited Count：8 Percentile：90.42(Physics, Fluids & Plasmas)The effect of the toroidal field ripple and the edge toroidal rotation on H-mode and pedestal performance as well as ELM characteristics are investigated both in JET and JT-60U. In JT-60U, the amplitude of TF ripple was reduced from 1.2 % to 0.5 % after the installation of ferritic steel tiles. In JET, the ripple amplitude can actively be varied. In both devices, edge rotation in the same direction to the plasma current was reduced with increasing the ripple amplitude. Even at the same amplitude of 0.5 %, the achievable edge rotation in JT-60U was still lower than that in JET. A series of power and density scans performed at several ripple amplitude indicated that plasmas with smaller ripple amplitude and/or larger co-rotation are favorable to achieve higher pedestal pressure and plasma confinement in both devices. As for ELM characteristics, larger co-rotation seems to increase the ELM energy loss together with the reduction of the ELM frequency.
Saibene, G.*; Oyama, Naoyuki; Lnnroth, J.*; Andrew, Y.*; la Luna, E. de.*; Giroud, C.*; Huysmans, G. T. A.*; Kamada, Yutaka; Kempenaars, M. A. H.*; Loarte, A.*; et al.
Nuclear Fusion, 47(8), p.969 - 983, 2007/08
Times Cited Count：36 Percentile：74.52(Physics, Fluids & Plasmas)This paper summarizes results of dimensionless identity experiments in JT-60U and JET, aimed at the comparison of the H-mode pedestal and ELM behaviour in the two devices. In general, pedestal pressure in JT-60U is lower than in JET. These results motivated a closer investigation of experimental conditions in the two devices, to identify possible "hidden" physics that prevents obtaining a good match of pedestal values over a large range of plasmas parameters. Ripple-induced ion losses of the medium bore plasma used in JT-60U for the similarity experiments are identified as the main difference with JET. The magnitude of the JT-60U ripple losses is sufficient to induce counter-toroidal rotation in co-injected plasma. The influence of ripple losses was demonstrated at high q plasma: reducing ripple losses by 2 by replacing positive with negative neutral beam injection resulted in an increased pedestal pressure in JT-60U, providing a good match to full power JET H-modes.
Doyle, E. J.*; Houlberg, W. A.*; Kamada, Yutaka; Mukhovatov, V.*; Osborne, T. H.*; Polevoi, A.*; Bateman, G.*; Connor, J. W.*; Cordey, J. G.*; Fujita, Takaaki; et al.
Nuclear Fusion, 47(6), p.S18 - S127, 2007/06
no abstracts in English
