Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sips, A. C. C.*; Casper, T.*; Doyle, E. J.*; Giruzzi, G.*; Gribov, Y.*; Hobirk, J.*; Hogeweij, G. M. D.*; Horton, L. D.*; Hubbard, A. E.*; Hutchinson, I.*; et al.
Nuclear Fusion, 49(8), p.085015_1 - 085015_11, 2009/08
Times Cited Count：53 Percentile：87.31(Physics, Fluids & Plasmas)Key parts of the ITER scenarios are determined by the capability of the proposed poloidal field (PF) coil set. They include the plasma breakdown at low loop voltage, the current rise phase, the performance during the flat top (FT) phase and a ramp down of the plasma. The ITER discharge evolution has been verified in dedicated experiments. New data are obtained from C-Mod, ASDEX Upgrade, DIII-D, JT-60U and JET. Results show that breakdown for 
0.23-0.33 V m
is possible unassisted (ohmic) for large devices like JET and attainable in devices with a capability of using ECRH assist. For the current ramp up, good control of the plasma inductance is obtained using a full bore plasma shape with early X-point formation. This allows optimization of the flux usage from the PF set. Additional heating keeps 
(3) 0.85 during the ramp up to 
= 3. A rise phase with an H-mode transition is capable of achieving (3) 0.7 at the start of the FT. Operation of the H-mode reference scenario at 
3 and the hybrid scenario at = 4-4.5 during the FT phase is documented, providing data for the (3) evolution after the H-mode transition and the (3) evolution after a back-transition to L-mode. During the ITER ramp down it is important to remain diverted and to reduce the elongation. The inductance could be kept 
1.2 during the first half of the current decay, using a slow 
ramp down, but still consuming flux from the transformer. Alternatively, the discharges can be kept in H-mode during most of the ramp down, requiring significant amounts of additional heating.
Sips, A. C. C.*; Casper, T. A.*; Doyle, E. J.*; Giruzzi, G.*; Gribov, Y.*; Hobirk, J.*; Hogeweij, G. M. D.*; Horton, L. D.*; Hubbard, A. E.*; Hutchinson, I.*; et al.
Proceedings of 22nd IAEA Fusion Energy Conference (FEC 2008) (CD-ROM), 8 Pages, 2008/10
The ITER discharge evolution has been verified in dedicated experiments. Results show that breakdown at E 0.23-0.32 V/m is possible un-assisted (ohmic) for large devices like JET and attainable in all devices with ECRH assist. For the current ramp up, good control of the plasma inductance is obtained using a full bore plasma shape with early X-point formation. Operation of the H-mode reference scenario at q = 3 and the hybrid scenario at q95=4-4.5 during the flat top phase was documented. Specific studies during the flat top phase provide data for the li evolution after the H-mode transition and the li evolution after a back-transition to L-mode. During the ITER ramp down it is important to remain diverted and to reduce the elongation.
Gribov, Y.*; Humphreys, D. A.*; Kajiwara, Ken*; Lazarus, E. A.*; Lister, J. B.*; Ozeki, Takahisa; Portone, A.*; Shimada, Michiya*; Sips, A. C. C.*; Wesley, J. C.*
Nuclear Fusion, 47(6), p.S385 - S403, 2007/06
Times Cited Count：133 Percentile：97.45(Physics, Fluids & Plasmas)This chapter describes the progress achieved in these areas in the tokamak experiments since the ITER Physics Basis (1999 Nucl. Fusion 39 2577) was written and the results of assessment of ITER to provide the plasma initiation and basic control. This chapter considers only plasma initiation and plasma basic control. The experiments on plasma initiation performed in DIII-D and JT-60U, as well as the theoretical studies performed for ITER, have demonstrated that, ITER can produce plasma initiation in a low toroidal electric field of 0.3V/m, if it is assisted by about 2MW of ECRF heating. The plasma basic control is described, which includes control of the plasma current, position and shape - the plasma magnetic control, as well as control of other plasma global parameters or their profiles - the plasma performance control.
