Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

Measurement of density and viscosity for molten salts

Sato, Rika*; Nishi, Tsuyoshi*; Ota, Hiromichi*; Hayashi, Hirokazu; Sugawara, Takanori; Nishihara, Kenji

Dai-43-Kai Nihon Netsu Bussei Shimpojiumu Koen Rombunshu (CD-ROM), 3 Pages, 2022/10

no abstracts in English

Variation in formation and migration of self-interstitial atom clusters in electron irradiated copper with material purity and specimen preparation method

Sato, Yuki*; Abe, Yosuke; Okubo, Kenji*; Tanioka, Takashi*

Philosophical Magazine, 102(12), p.1152 - 1172, 2022/00

https://doi.org/10.1080/14786435.2022.2042610

Using in situ observation with high-voltage electron microscope, one-dimensional (1D) migration of self-interstitial atom (SIA) clusters under electron irradiation at 300 K was surveyed for copper materials of five nominal purities and TEM specimens prepared with three methods. In standard (STD) specimens that were prepared through cold rolling and annealing in the vacuum, formation and 1D migration of SIA clusters did not depend much on the nominal purity. In non-annealed (NA) specimens, prepared from high purity materials through mechanical processing and electropolishing, defect structure was coarser than in STD specimens. Results of bulk annealing (BA) specimens showed that annealing of as-received block material had minor effects. Above results were discussed based on the hypothesis that impurity atoms existing in as-received materials and those induced by annealing act as traps for SIA clusters.

Synthesis of a Si-Al gel as a starting material of aluminosilicate solids

Sato, Junya; Shiota, Kenji*; Takaoka, Masaki*

Zairyo, 70(5), p.406 - 411, 2021/05

https://doi.org/10.2472/jsms.70.406

An aluminosilicate solid is an inorganic material that has the property of immobilizing heavy metals or radionuclides in the matrix. In this study, aluminosilicates with a Si/Al molar ratio of 0.5 was synthesized from a chemical reagent in order to produce aluminosilicate solids with a low Si/Al molar ratio, which were expected to improve the immobilization of heavy metals and radionuclides contained in the matrix. The synthesized Si-Al gel with a Si/Al molar ratio of 0.5 had little impurity content and was in an amorphous phase. In addition, the compressive strength of the aluminosilicate solid produced by the synthesized Si-Al gel showed a 5 MPa or more, confirming that it can be used as a raw material for aluminosilicate solids. The aluminosilicate solid with a Si/Al molar ratio of 1.25 had a dense surface structure from the result of BSE images and had the highest compressive strength among all samples.

J-PARC E07; Systematic study of double strangeness system with hybrid emulsion method

Yoshida, Junya; Akaishi, Takaya; Fujita, Manami; Hasegawa, Shoichi; Hashimoto, Tadashi; Hosomi, Kenji; Ichikawa, Masaya; Ichikawa, Yudai; Imai, Kenichi*; Kim, S.; et al.

JPS Conference Proceedings (Internet), 33, p.011112_1 - 011112_8, 2021/03

https://doi.org/10.7566/JPSCP.33.011112

Annual report on the environmental radiation monitoring around the Tokai Reprocessing Plant FY2019

Nakano, Masanao; Fujii, Tomoko; Nemoto, Masashi; Tobita, Keiji; Seya, Natsumi; Nishimura, Shusaku; Hosomi, Kenji; Nagaoka, Mika; Yokoyama, Hiroya; Matsubara, Natsumi; et al.

JAEA-Review 2020-069, 163 Pages, 2021/02

JAEA-Review-2020-069.pdf:4.78MB

Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2019 to March 2020. In this report, some data include the influence of the accidental release from the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. (the trade name was changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016) in March 2011. Appendices present comprehensive information, such as monitoring programs, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes. In addition, the data which were influenced by the accidental release and exceeded the normal range of fluctuation in the monitoring, were evaluated.

Study on the baryon interaction by hypernuclear spectroscopy with the reaction

Gogami, Toshiyuki*; Fujita, Manami; Hasegawa, Shoichi; Hosomi, Kenji; Imai, Kenichi*; Ichikawa, Yudai; Nanamura, Takuya; Naruki, Megumi; Sako, Hiroyuki; Sato, Susumu; et al.

Journal of Physics; Conference Series, 1643, p.012133_1 - 012133_6, 2020/12

https://doi.org/10.1088/1742-6596/1643/1/012133

Bound spinon excitations in the spin- anisotropic triangular antiferromagnet CaReOCl

Nawa, Kazuhiro*; Hirai, Daigoro*; Kofu, Maiko; Nakajima, Kenji; Murasaki, Ryo*; Kogane, Satoshi*; Kimata, Motoi*; Nojiri, Hiroyuki*; Hiroi, Zenji*; Sato, Taku*

Physical Review Research (Internet), 2(4), p.043121_1 - 043121_11, 2020/12

https://doi.org/10.1103/PhysRevResearch.2.043121

The spin excitations of the = anisotropic triangular antiferromagnet CaReOCl were investigated by inelastic neutron-scattering experiments. The spin excitation spectrum exhibits sharp dispersive modes in addition to a spinonlike continuum. The consistency with the simulated spectrum based on the random-phase approximation is better for CaReOCl than for CsCuCl, indicating that the spin system in the former remains closer to a Tomonaga-Luttinger liquidlike disordered state.

Annual report on the environmental radiation monitoring around the Tokai Reprocessing Plant FY2018

Nakano, Masanao; Fujii, Tomoko; Nemoto, Masashi; Tobita, Keiji; Kono, Takahiko; Hosomi, Kenji; Nishimura, Shusaku; Matsubara, Natsumi; Maehara, Yushi; Narita, Ryosuke; et al.

JAEA-Review 2019-048, 165 Pages, 2020/03

JAEA-Review-2019-048.pdf:2.69MB

Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2018 to March 2019. In this report, some data include the influence of the accidental release from the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. (the trade name was changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016) in March 2011. Appendices present comprehensive information, such as monitoring programs, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes. In addition, the data which were influenced by the accidental release and exceeded the normal range of fluctuation in the monitoring, were evaluated.

Stabilization of lead with amorphous solids synthesized from aluminosilicate gel

Sato, Junya; Shiota, Kenji*; Takaoka, Masaki*

Journal of Hazardous Materials, 385, p.121109_1 - 121109_9, 2020/03

https://doi.org/10.1016/j.jhazmat.2019.121109

Lead is a hazardous heavy metal that can be stabilized by incorporation into the matrix of aluminosilicate bearing phases as they solidify. The actual mechanism by which lead is stabilized, however, continues to be unclear because the individual mechanisms of Pb incorporation into crystalline and amorphous aluminosilicate phases have not yet been studied separately. A detailed investigation of the incorporation of Pb into the amorphous phase of aluminosilicate solids was therefore performed. Amorphous aluminosilicate solids were synthesized with 0.7, 1.5, and 3.7 wt% of Pb from aluminosilicate gel produced from chemical reagents. Based on Raman spectroscopy, the Si-O stretching vibration bond shifted to lower wavenumbers with increasing Pb concentration. This shift suggested that covalent bonding between Pb and O in the matrix of the aluminosilicate solids increased. In addition, sequential extraction revealed that most of the Pb (75-90%) in the aluminosilicate solids was in a poorly soluble form (i.e. reducible, oxidizable, and residual fractions). These findings indicate that most of Pb is bonded covalently to the amorphous phase in aluminosilicate solids.