Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kasahara, Naoto*; Yamano, Hidemasa; Nakamura, Izumi*; Demachi, Kazuyuki*; Sato, Takuya*; Ichimiya, Masakazu*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
In this study, we propose failure mitigation methods by application of passive safety structures. The idea of the passive safety structures was applied to next generation fast reactors under high temperature conditions and excessive earthquake conditions.
Oikawa, Kenichi; Sato, Hirotaka*; Watanabe, Kenichi*; Su, Y. H.; Shinohara, Takenao; Kai, Tetsuya; Kiyanagi, Yoshiaki*; Hasemi, Hiroyuki
Journal of Physics; Conference Series, 2605, p.012013_1 - 012013_6, 2023/10
Tsuchikawa, Yusuke; Kai, Tetsuya; Abe, Yuta; Oikawa, Kenichi; Parker, J. D.*; Shinohara, Takenao; Sato, Ikken
Journal of Physics; Conference Series, 2605, p.012022_1 - 012022_6, 2023/10
We developed a method to obtain the areal density distribution of boron, which has a large neutron cross section, by means of an energy resolved neutron imaging. Commonly in a measurement of elements with very high neutron sensitivity, the quantitative measurement becomes more difficult with the amount of element due to the neutron self-shielding effect. To avoid this effect, an energy-resolved method using known cross section data was attempted, and a quantitative imaging of such elements was demonstrated at the MLF of J-PARC. This presentation introduces a measurement of melted simulated-fuel assemblies obtained in the research of the Fukushima Daiichi Nuclear Power Plant after the severe accident. Energy-dependent neutron transmission rates of the samples were measured by a neutron imaging detector, and were analyzed to obtained the areal density of boron at each position.
Miyakawa, Kazuya; Hayano, Akira; Sato, Naomi; Nakata, Kotaro*; Hasegawa, Takuma*
JAEA-Data/Code 2023-009, 103 Pages, 2023/09
This borehole investigation was carried out to confirm the validity of the distribution of low flow areas deep underground estimated based on the geophysical survey in FY 2020, as a part of an R&D supporting program titled "Research and development on Groundwater Flow Evaluation Technology in Bedrock" under contract to the Ministry of Economy, Trade and Industry (2021, 2022 FY, Grant Number: JPJ007597). The borehole name is Horonobe Fossil seawater Boring-1 and is referred to as HFB-1 borehole. HFB-1 is a vertical borehole drilled adjacent to the Horonobe Underground Research Laboratory (URL), which was drilled from the surface to a depth of 200 m in FY2021 and from a depth of 200 m to 500 m in FY2022. This report summarizes information related to the drilling of HFB-1 and various data (rock core description, geophysical logging, chemical analysis, etc.) obtained from the borehole investigation.
Ishii, Katsunori; Morita, Keisuke; Noguchi, Hiroki; Aoki, Takeshi; Mizuta, Naoki; Hasegawa, Takeshi; Nagatsuka, Kentaro; Nomoto, Yasunobu; Shimizu, Atsushi; Iigaki, Kazuhiko; et al.
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2023/09
Konno, Chikara; Ota, Masayuki*; Kwon, Saerom*; Onishi, Seiki*; Yamano, Naoki*; Sato, Satoshi*
Journal of Nuclear Science and Technology, 60(9), p.1046 - 1069, 2023/09
Times Cited Count:4 Percentile:98.08(Nuclear Science & Technology)JENDL-5 was validated from a viewpoint of shielding applications under the Shielding Integral Test Working Group of the JENDL Committee. The following benchmark experiments were selected: JAEA/FNS in-situ experiments, Osaka Univ./OKTAVIAN TOF experiments, ORNL/JASPER sodium experiments, NIST iron experiment and QST/TIARA experiments. These experiments were analyzed with MCNP and nuclear data libraries (JENDL-5, JENDL-4.0 or JENDL-4.0/HE, ENDF/B-VIII.0 and JEFF-3.3). The analysis results demonstrate that JENDL-5 is comparable to or better than JENDL-4.0 or JENDL-4.0/HE, ENDF/B-VIII.0 and JEFF-3.3.
Machida, Masahiko; Yamada, Susumu; Kim, M.; Okumura, Masahiko; Miyamura, Hiroko; Shikaze, Yoshiaki; Sato, Tomoki*; Numata, Yoshiaki*; Tobita, Yasuhiro*; Yamaguchi, Takashi; et al.
RIST News, (69), p.2 - 18, 2023/09
The contamination of radioactive materials leaked from the reactor has resulted in numerous hot spots in the Fukushima Daiichi Nuclear Power Station (1F) building, posing obstacles to its decommissioning. In order to solve this problem, JAEA has conducted research and development of the digital technique for inverse estimation of radiation source distribution and countermeasures against the estimated source in virtual space for two years from 2021 based on the subsidy program "Project of Decommissioning and Contaminated Water Management" performed by the funds from the Ministry of Economy, Trade and Industry. In this article, we introduce the results of the project and the plan of the renewal project started in April 2023. For the former project, we report the derivative method for LASSO method considering the complex structure inside the building and the character of the source and show the result of the inverse estimation using the method in the real reactor building. Moreover, we explain the platform software "3D-ADRES-Indoor" which integrates these achievements. Finally, we introduce the plan of the latter project.
Kondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
Times Cited Count:5 Percentile:92.64(Multidisciplinary Sciences)no abstracts in English
Nomoto, Yasunobu; Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; Noguchi, Hiroki; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 6 Pages, 2023/05
Li, W.*; Yamada, Shinya*; Hashimoto, Tadashi; Okumura, Takuma*; Hayakawa, Ryota*; Nitta, Kiyofumi*; Sekizawa, Oki*; Suga, Hiroki*; Uruga, Tomoya*; Ichinohe, Yuto*; et al.
Analytica Chimica Acta, 1240, p.340755_1 - 340755_9, 2023/02
Times Cited Count:2 Percentile:31.9(Chemistry, Analytical)no abstracts in English
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Abe, Yutaka*; Tsubakihara, Kosuke*; Okumura, Shin*; Ishizuka, Chikako*; Yoshida, Tadashi*; et al.
Journal of Nuclear Science and Technology, 60(1), p.1 - 60, 2023/01
Times Cited Count:64 Percentile:99.99(Nuclear Science & Technology)Kobayashi, Aine*; Toyama, Takeshi*; Nakamura, Takeshi*; Shobuda, Yoshihiro; Ishii, Koji*; Tomizawa, Masahito*; Takeuchi, Yasunao*; Sato, Yoichi*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.19 - 23, 2023/01
In the J-PARC main ring, density modulation due to longitudinal beam instability occurs during the debunching process of coasting beams. This leads to the generation of an electron cloud, which in turn causes transverse beam instabilities. The transverse beam instability causes beam loss and the electron cloud is assumed to cause vacuum degradation, both of which hinder the beam intensity enhancement, so it is essential to clarify the causes and countermeasures. In particular, the longitudinal impedance of several hundred MHz has been investigated as relevant, and measures to reduce the impedance of individual devices are underway. The Eddy-current type septum magnet, newly installed this year, was found to have a large impedance by simulation. Therefore, we are investigating a method to reduce the impedance by a flange loaded with SiC radio wave absorber, which can be applied to locations where there is no spatial margin to install a taper. In this report, we will discuss the characterization of SiC to be used in actual devices, impedance simulation reflecting the results of SiC evaluation, and evaluation of the effect of impedance countermeasures by impedance measurement using the wire method, and progress in evaluating the effect on the beam by beam simulation and beam study.
Kuga, Naoya*; Shiiba, Takuro*; Sato, Tatsuhiko; Hashimoto, Shintaro; Kuroiwa, Yasuyoshi*
Journal of Nuclear Science and Technology, 10 Pages, 2023/00
Times Cited Count:1 Percentile:72.91(Nuclear Science & Technology)This study aims to verify the accuracy of PHITS in terms of photon and electron transport and provide essential data for its application in clinical dosimetry in high-energy photon beam therapy. Percentage depth dose (PDD), beam profiles, and output factor (OPF) in a water phantom with various field sizes created by a Clinac 21EX linear accelerator were measured using an ionization chamber. Experimental setups were precisely reproduced by PHITS version 3.24, and the percentage differences (%Diff) between the measured and calculated data were evaluated. The average %Diff of PDDs obtained from PHITS and measurement were within 10% and 2% in the build-up and fall-off regions, respectively. For beam profiles, the average %Diff in the plateau region was within 3%; the differences between the calculated and measured distances from the central axis to 50% dose level were within 2 mm. These differences were lower than their tolerance levels. The consistency between the PHITS and EGSnrc was better; their %Diff was within 1% in most cases. The concurrence between the PHITS and measurement shown in this study demonstrates the potential clinical application of PHITS in high-energy photon beam therapy, given its similar dose calculation accuracy compared with EGSnrc.
Watabe, Hiroshi*; Sato, Tatsuhiko; Yu, K. N.*; Zivkovic, M.*; Krstic, D.*; Nikezic, D.*; Kim, K. M.*; Yamaya, Taiga*; Kawachi, Naoki*; Tanaka, Hiroki*; et al.
Radiation Protection Dosimetry, 13 Pages, 2023/00
Times Cited Count:0 Percentile:0.01(Environmental Sciences)Previously, we have developed DynamicMC for modelling relative movement of ORNL phantom in a radiation field for MCNP. Using this software, 3-dimensional dose distributions in a phantom irradiated by a certain mono-energetic source can be deduced through its graphical user interface (GUI). In this study, we extended DynamicMC to be used in combination with the PHITS by providing it with a higher flexibility for dynamic movement for a less sophisticated anthropomorphic phantom. We anticipate that the present work and the developed open-source tools will be in the interest of nuclear radiation physics community for research and teaching purposes.
Ito, Daisuke*; Sato, Hirotaka*; Odaira, Naoya*; Saito, Yasushi*; Parker, J. D.*; Shinohara, Takenao; Kai, Tetsuya; Oikawa, Kenichi
Journal of Nuclear Materials, 569, p.153921_1 - 153921_6, 2022/10
Times Cited Count:1 Percentile:31.61(Materials Science, Multidisciplinary)Ishii, Yui*; Yamamoto, Arisa*; Sato, Naoki*; Nambu, Yusuke*; Kawamura, Seiko; Murai, Naoki; Ohara, Koji*; Kawaguchi, Shogo*; Mori, Takao*; Mori, Shigeo*
Physical Review B, 106(13), p.134111_1 - 134111_7, 2022/10
Times Cited Count:0 Percentile:0(Materials Science, Multidisciplinary)Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count:6 Percentile:84.97(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Review 2022-016, 193 Pages, 2022/08
Aiming to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR), Japan Atomic Energy Agency (JAEA) is planning a HTTR heat application test producing hydrogen with High Temperature Engineering Test Reactor (HTTR) achieved 950C of the highest reactor outlet coolant temperature in the world. In the HTTR heat application test, it is required to establish its safety design realizing highly safe connection of a HTGR and a hydrogen production plant by the Nuclear Regulation Authority to obtain the permission of changes to reactor installation. However, installation of a system connecting the hydrogen production plant and a nuclear reactor, and its safety design has not been conducted so far in conventional nuclear power plant including HTTR in the world. A special committee on the HTTR heat application test, established under the HTGR Research and Development Center, considered a safety design philosophy for the HTTR heat application test based on an authorized safety design of HTTR in terms of conformity to the New Regulatory Requirements taking into account new considerable events as a result of the plant modification and connection of the hydrogen production plant. This report provides materials of the special committee such as technical reports, comments provided from committee members, response from JAEA for the comments and minutes of the committee.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Technology 2022-011, 60 Pages, 2022/07
Japan Atomic Energy Agency is planning a High Temperature Engineering Test Reactor (HTTR) heat application test producing hydrogen with the HTTR which achieved the highest reactor outlet coolant temperature of 950C in the world to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR). In the HTTR heat application test, it is required to establish its safety design for coupling a hydrogen production plant to HTGR through the licensing by the Nuclear Regulation Authority (NRA). A draft of a safety design philosophy for the HTTR heat application test facility was considered taking into account postulated events due to the plant modification and coupling of the hydrogen production plant based on the HTTR safety design which was authorized through the safety review of the NRA against New Regulatory Requirements. The safety design philosophy was examined to apply proven conventional chemical plant standards to the hydrogen production plant for ensuring public safety against disasters caused by high pressure gases. This report presents a result of a consideration on safety design philosophies regarding the reasonability and condition to apply the High Pressure Gas Safety Act for the hydrogen production plant, safety classifications, seismic design classification, identification of important safety system.