Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Matsui, Kunihiro; Koizumi, Norikiyo; Hemmi, Tsutomu; Takano, Katsutoshi; Nakajima, Hideo; Kimura, Satoshi*; Iijima, Ami*; Sakai, Masahiro*; Osemochi, Koichi*; Shimada, Mamoru*
IEEE Transactions on Applied Superconductivity, 22(3), p.4203005_1 - 4203005_5, 2012/06
Times Cited Count:6 Percentile:37.87(Engineering, Electrical & Electronic)JAEA is responsible for the procurement of 9 toroidal field (TF) coils as Japanese Domestic Agency. JAEA had started several trials to successfully develop technologies for the TF coil manufacture since March 2009, and performed one-third scale trials aiming at qualifying and optimizing the procedures of the TF coil fabrication. The fabricated double pancakes (DPs) were successfully put into the profile with tolerances from zero to 1.5 mm. These tolerances correspond to 0.06% accuracy in the conductor length. The geometry of the DP was changed after heat treatment. Heat treatment procedure to avoid such deformation should be developed or the change of winding geometry should be taken into account in the fabrication of the TF coils. The one-third scale DP was successfully impregnated. Although exothermal reaction is given to take place during curing in the blended resin, we successfully cured the one-third scale DP.
Koizumi, Norikiyo; Matsui, Kunihiro; Hemmi, Tsutomu; Takano, Katsutoshi; Chida, Yutaka; Iguchi, Masahide; Nakajima, Hideo; Shimada, Mamoru*; Osemochi, Koichi*; Makino, Yoshinobu*; et al.
IEEE Transactions on Applied Superconductivity, 22(3), p.4200404_1 - 4200404_4, 2012/06
Times Cited Count:9 Percentile:47.66(Engineering, Electrical & Electronic)JAEA started sub- and full-scale trials to qualify and optimize manufacturing procedure of ITER TF coil from March, 2009. As major outcome of these trials, automatic winding system with accuracy in conductor length measurement of 0.01% has been established and the elongation of the conductor length due to heat treatment was measured to be 0.06%. To confirm validity of these outcomes, the authors carried out winding of a one-third scale dummy double pancake (DP), followed by its insulation and impregnation trial, and, in addition, heat treatment of one-third scale DP with real a TF conductor. The details about these trials are described in the other paper. The authors also performed trial manufacture of full scale RP and CPs for dummy double pancake, which will be made in near future. The full scale RP is manufactured by machining 10 segments in parallel to shorten machining duration and joining each segment by welding. In our trial manufacture of the full scale RP, hot-rolled SS316LN plates are machined to a final dimension, namely without additional material, and these segments are laser-welded. From these trials, manufacturing procedure of a thick hot-roll SS316LN plate is qualified and machining procedure is established, while more optimization may be necessary to achieve the required schedule and cost.
Matsui, Kunihiro; Koizumi, Norikiyo; Hemmi, Tsutomu; Nakajima, Hideo; Kimura, Satoshi*; Shimada, Mamoru*
Teion Kogaku, 47(3), p.160 - 165, 2012/03
no abstracts in English
Nagamoto, Yoshifumi*; Osemochi, Koichi*; Shimada, Mamoru*; Senda, Ikuo*; Koizumi, Norikiyo; Chida, Yutaka; Iguchi, Masahide; Nakajima, Hideo
Teion Kogaku, 47(3), p.200 - 205, 2012/03
Based on the results of the sub- and full-scale trials, the TF coil and TF coil structure manufacturing procedures were considered. Radial plate (RP) will be manufactured by assembling 10 sets of segments with Laser Beam Welding. Cover plates (CPs) will be manufactured by 3 different methods, depending on their geometry. For Winding pack (WP), winding system to enable to measurement of the conductor length with the accuracy of 0.01% for serial production was designed. Assembling procedure and groove types of narrow gap TIG welding for coil structures were determined. Hereafter, technical improvements will be considered in order to aim for further optimization of manufacturing.
Ninomiya, Hiromasa; Akiba, Masato; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hayashi, Nobuhiko; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Inoue, Nobuyuki; et al.
Journal of the Korean Physical Society, 49, p.S428 - S432, 2006/12
To contribute DEMO and ITER, the design to modify the present JT-60U into superconducting coil machine, named National Centralized Tokamak (NCT), is being progressed under nationwide collaborations in Japan. Mission, design and strategy of this NCT program is summarized.
Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.
Nuclear Fusion, 46(3), p.S29 - S38, 2006/03
Times Cited Count:13 Percentile:41.84(Physics, Fluids & Plasmas)The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.
Tsuchiya, Katsuhiko; Akiba, Masato; Azechi, Hiroshi*; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; et al.
Fusion Engineering and Design, 81(8-14), p.1599 - 1605, 2006/02
Times Cited Count:1 Percentile:9.98(Nuclear Science & Technology)no abstracts in English
Tamai, Hiroshi; Akiba, Masato; Azechi, Hiroshi*; Fujita, Takaaki; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; Hosogane, Nobuyuki; Ichimura, Makoto*; et al.
Nuclear Fusion, 45(12), p.1676 - 1683, 2005/12
Times Cited Count:15 Percentile:45.55(Physics, Fluids & Plasmas)Design studies are shown on the National Centralized Tokamak facility. The machine design is carried out to investigate the capability for the flexibility in aspect ratio and shape controllability for the demonstration of the high-beta steady state operation with nation-wide collaboration, in parallel with ITER towards DEMO. Two designs are proposed and assessed with respect to the physics requirements such as confinement, stability, current drive, divertor, and energetic particle confinement. The operation range in the aspect ratio and the plasma shape is widely enhanced in consistent with the sufficient divertor pumping. Evaluations of the plasma performance towards the determination of machine design are presented.
Tamai, Hiroshi; Matsukawa, Makoto; Kurita, Genichi; Hayashi, Nobuhiko; Urata, Kazuhiro*; Miura, Yushi; Kizu, Kaname; Tsuchiya, Katsuhiko; Morioka, Atsuhiko; Kudo, Yusuke; et al.
Plasma Science and Technology, 6(1), p.2141 - 2150, 2004/02
Times Cited Count:2 Percentile:6.52(Physics, Fluids & Plasmas)The dominant issue for the the modification program of JT-60 (JT-60SC) is to demonstrate the steady state reactor relevant plasma operation. Physics design on plasma parameters, operation scenarios, and the plasma control method are investigated for the achievement of high-. Engineering design and the R&D on the superconducting magnet coils, radiation shield, and vacuum vessel are performed. Recent progress in such physics and technology developments is presented.
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Chujo, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
no abstracts in English
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Cho, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
Times Cited Count:33 Percentile:69.18(Physics, Fluids & Plasmas)no abstracts in English
Hamajima, Takataro*; Hanai, Satoshi*; Wachi, Yoshihiro*; Shimada, Mamoru*; Ono, Michitaka*; Martovetsky, N.*; Zbasnik, J.*; Moller, J.*; Takahashi, Yoshikazu; Matsui, Kunihiro; et al.
IEEE Transactions on Applied Superconductivity, 10(1), p.812 - 815, 2000/03
Times Cited Count:10 Percentile:53.58(Engineering, Electrical & Electronic)no abstracts in English
Hamajima, Takataro*; Shimada, Mamoru*; Ono, Michitaka*; Takigami, Hiroyuki*; Hanai, Satoshi*; Wachi, Yoshihiro*; Takahashi, Yoshikazu; Matsui, Kunihiro; Ito, Toshinobu*; Isono, Takaaki; et al.
Teion Kogaku, 33(7), p.492 - 499, 1998/00
no abstracts in English