Actual stress analysis of small-bore butt-welded pipe by complementary use of synchrotron X-rays and neutrons

Suzuki, Kenji*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Shobu, Takahisa; Morooka, Satoshi

Zairyo, 72(4), p.316 - 323, 2023/04

https://doi.org/10.2472/jsms.72.316

Abnormal grain growth; A Spontaneous activation of competing grain rotation

Liss, K.-D.*; Xu, P. G.; Shiro, Ayumi*; Zhang, S. Y.*; Yukutake, Eitaro*; Shobu, Takahisa; Akita, Koichi*

Advanced Engineering Materials, 9 Pages, 2023/00

https://onlinelibrary.wiley.com/doi/10.1002/adem.202300470

A Study on stress measurement of weld part using double exposure method

Suzuki, Kenji*; Kura, Komoe*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Kajiwara, Kentaro*; Shobu, Takahisa

Zairyo, 71(12), p.1005 - 1012, 2022/12

https://doi.org/10.2472/jsms.71.1005

This paper describes a stress measurement from a welded part of an austenitic stainless steel using synchrotron X-rays. Difficulty measuring the X-ray stress of the welded part is caused by the broadening of the diffraction spot in the radial and circumferential directions. The bending strains of the rectangular bar made of the welded part were measured using synchrotron white X-rays and the double exposure method. To improve the energy resolution, monochromatic synchrotron X-ray of 70 keV was used. The diffraction pattern showed the sharp arc like a pattern from texture material. The diffraction profile was obtained from the integral of the diffraction intensity in the direction of the circumference. The diffraction angle was determined using the double exposure method. As a result, the distribution of the residual stresses of the welded part could be measured.

Influence of pulse duration on mechanical properties and dislocation density of dry laser peened aluminum alloy using ultrashort pulsed laser-driven shock wave

Yoshida, Masayuki*; Nishihata, Itsuki*; Matsuda, Tomoki*; Ito, Yusuke*; Sugita, Naohiko*; Shiro, Ayumi*; Shobu, Takahisa; Arakawa, Kazuto*; Hirose, Akio*; Sano, Tomokazu*

Journal of Applied Physics, 132(7), p.075101_1 - 075101_9, 2022/08

https://doi.org/10.1063/5.0083511

Stress measurements of quasi-coarse grained material using double exposure method with high-energy monochromatic X-rays

Suzuki, Kenji*; Yamada, Minami*; Shiro, Ayumi*; Shobu, Takahisa; Toyokawa, Hidenori*; Saji, Choji*

Zairyo, 71(4), p.347 - 353, 2022/04

https://doi.org/10.2472/jsms.71.347

We have already succeeded in the residual stress of aluminum alloys using the double exposure method (DEM) with 30 keV synchrotron radiation X-rays. However, the DEM has not be applied in the range of high-energy synchrotron X-rays. In this study, the stress measurements of a shrink-fitted ring using the DEM with synchrotron monochromatic X-rays beyond about 70 keV were performed. A CdTe pixel detector and a CCD camera were used as a detector. The shrink-fitted specimen of SUS304 was quasi-coarse grains of 43 micro-meters, and the diffraction rings were spotty. Despite quasi-coarse grains, it was possible to measure the stresses of the shrink-fitted specimen using the DEM. As a result, the DEM is excellent method to measures the stress for coarse grained materials. In addition, it is better to make the length between the detection positions longer to improve precision of the DEM. On the other hand, it was ineffective to increase the positions of detection.

Fundamental study for decorporation of plutonium by chelating agents; Coordination analyses of simulated plutonium with chelating agents by X-ray absorption spectroscopy

Uehara, Akihiro*; Shuhui, X.*; Sato, Ryotaro*; Matsumura, Daiju; Tsuji, Takuya; Yakumaru, Haruko*; Shiro, Ayumi*; Saito, Hiroyuki*; Tanaka, Izumi*; Ishihara, Hiroshi*; et al.

Advances in X-Ray Chemical Analysis, Japan, 53, p.223 - 229, 2022/03

no abstracts in English

synchrotron radiation observation of deformation and annealing processes of aluminum single crystal

Shiro, Ayumi*; Okada, Tatsuya*; Shobu, Takahisa

Mechanical Engineering Journal (Internet), 8(6), p.21-00106_1 - 21-00106_8, 2021/12

https://doi.org/10.1299/mej.21-00106

The objective of the present study was to carry out observations of deformation and annealing processes of aluminum single crystals using a synchrotron radiation X-rays at SPring-8. Al single-crystalline samples having a 111 orientation parallel to the longitudinal direction were grown by a Bridgman method. The samples were deformed in tension to a nominal strain of 0.08 at room temperature using an in-line tensioning apparatus. Post-deformation annealing at 480 C was subsequently carried out in the same apparatus. A two-dimensional detector was used to detect multiple diffracted beams from the sample during the deformation and annealing processes. The volume irradiated by the X-ray beam was found to be composed of three regions having a small orientation difference, which was attributable to sub-grained microstructures of the sample. Detailed analyses of a diffraction spot intensity showed that the sub-grained microstructures were surpassed by dislocated microstructures with the increase in the tensile strain. During the post-deformation annealing, diffraction spots from a recrystallized grain first appeared at 180 s after the temperature reached 480 C. Coexistence of diffraction spots from the deformation matrix and recrystallized grain lasted only for about 22 s in the irradiated volume. The migration rate of the boundary between the deformation matrix and recrystallized grain was estimated to be of the order of several micrometers/s.

Evaluation of internal strain distribution of dissimilar laser welding using high energy X-rays

Shobu, Takahisa; Shiro, Ayumi*; Muramatsu, Toshiharu*

SPring-8/SACLA Riyo Kenkyu Seikashu (Internet), 9(5), p.318 - 323, 2021/08

https://doi.org/10.18957/rr.9.5.318

Laser welding has already been put into practical use for various metal materials because the irradiation area is very small and the control is easy. In this study, we evaluated strain, stress, deformation, etc. near the processing affected area by high-energy synchrotron radiation X-ray diffraction method, which is one of the problems of laser welding of different materials that are expected to be put into practical use. As a result of internal deformation measurement of the bonding of dissimilar materials of copper and iron, it was confirmed that the copper side with a high coefficient of linear expansion was hardly deformed, strong tensile strain on the iron side, and a plastic deformation region on the heat-affected zone. In addition, a retained austenite phase, which is thought to be caused by the mixture of copper, was observed in the plastic deformation region of iron, and further problems were clarified in the evaluation of material strength in the mixed metallic materials.

Effects of stress and plastic strain on hydrogen embrittlement fracture of a U-bent martensitic steel sheet

Shibayama, Yuki; Hojo, Tomohiko*; Koyama, Motomichi*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Matsuno, Takashi*; Akiyama, Eiji*

ISIJ International, 61(4), p.1322 - 1329, 2021/04

https://doi.org/10.2355/isijinternational.ISIJINT-2020-569

Effects of residual stress and plastic strain on hydrogen embrittlement of a stretch-formed TRIP-aided martensitic steel sheet

Hojo, Tomohiko*; Akiyama, Eiji*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Kinugasa, Junichiro*; Yuse, Fumio*

Corrosion Science, 177, p.108957_1 - 108957_9, 2020/12

https://doi.org/10.1016/j.corsci.2020.108957

Hydrogen assisted cracking on hemispherically-stretch-formed specimens of transformation induced plasticity-aided martensitic steel was investigated. Hydrogen charging induced cracking around the foot of the impression formed on the steel sheet, and the cracks propagated along the radial direction toward the hillside and the plains. Distributions of stress, plastic strain and volume fraction of retained austenite were analyzed employing the energy-dispersive X-ray diffraction method utilizing the synchrotron X-ray radiation at SPring-8. It was notable that the crack initiation took place in the region where the measured tensile stress was the highest. Influences of plastic strain and resulted martensitic transformation were also suggested.