Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nishimura, Arashi; Okada, Yuji; Sugaya, Naoto; Sonobe, Hiroshi; Kimura, Nobuaki; Kimura, Akihiro; Hanawa, Yoshio; Nemoto, Hiroyoshi
JAEA-Technology 2021-003, 51 Pages, 2021/05
JAEA-Technology-2021-003.pdf:5.55MB
In the Japan Materials Testing Reactor (JMTR), the leakage accidents of radioactive waste liquid were occurred from the tanks and pipes of the liquid waste disposal facility in the JMTR tank-yard building in JFY2014. In order to respond to the accident, obtain the approval of the JAEA to the design and construction method from JFY2016, the tanks and pipes were replaced from JFY2016 to 2019. In the replaced, the production of the tanks and pipes of the liquid waste disposal facility applied Japanese technical standards correspondingly. On the other hand, the valve did not fall under the category of Japanese technical standards. The manufacturing specifications when replacing the valve were decided based on the including the selecting the standards of production and inspection for valves, Fluid properties, experience in JMTR. The production proceeded while carrying out the decided inspection. The valves that passed all the inspections were installed together with the tanks and pipes of the liquid waste, and the finished inspection was performed as a systems. The construction was completed with those inspection passed. This report is summarized valve Design, production and installation.
Ono, Masato; Hanawa, Yoshio; Sonobe, Hiroshi; Nishimura, Arashi; Sugaya, Naoto; Iigaki, Kazuhiko
JAEA-Technology 2020-010, 14 Pages, 2020/09
JAEA-Technology-2020-010.pdf:1.74MB
In response to new standard for regulating research and test reactor which is enforced December 18, 2013, it was carried out assessment of the probability of aircraft crashing for HTTR. According to assessment method provided in the Assessment Criteria of the Probability of Aircraft Crashing on Commercial Power Reactor Facilities, assessment was conducted targeting reactor building, spent fuel storage building and cooling tower. As a result, it was confirmed that the probability was 5.98
10
, which is lower than the assessment criteria 10
.
Sugaya, Naoto; Okada, Yuji; Nishimura, Arashi; Sonobe, Hiroshi; Kimura, Nobuaki; Kimura, Akihiro; Hanawa, Yoshio; Nemoto, Hiroyoshi
JAEA-Testing 2020-004, 67 Pages, 2020/08
JAEA-Testing-2020-004.pdf:8.17MB
In the Japan Materials Testing Reactor (JMTR), the leakage accidents of radioactive waste liquid were occurred from the tanks and pipes of the liquid waste disposal facility in the JMTR tank-yard building in JFY2014. In order to respond to the accident, the tanks and pipes were replaced from JFY2016 to 2019. On the other hand, a lot of cracks were occurred on the concreate wall of the tank-yard building when the frame structure supports were fixed to the concrete wall in the replacement work. Thus, it is necessary to repair the concreate wall of the tank-yard building. Especially, some cracks with swelling (cone-shaped fracture) were raised around some anchor bolts (the post-installed chemical anchor bolts) fixed the frame structure supports. The repairing method for the cone-shaped fracture of the concrete wall is standardized, but there was no reference value of tensile strength for the validation of the post-installed chemical anchor bolts after the repairing method. In this report, the repairing method was selected for the cone-shaped fracture on the concreate wall and the reference value of tensile strength for the validation of the post-installed chemical anchor bolts by this repairing method. The mock-ups for repairing cone-shaped fracture were fabricated by the selected repairing method and the tensile tests of the post-installed chemical anchor bolts were performed. From the results, the validation of the repairing method was obtained in this test and it was obvious the repairing of cone-shaped fracture is preferable method for the concreate wall of the JMTR tank-yard building.
Yamada, Fumitaka; Sonobe, Hitoshi; Igarashi, Hiroshi
JAEA-Review 2007-061, 67 Pages, 2008/02
JAEA-Review-2007-061.pdf:8.39MB
In JAEA, various systems associated with the collaboration with industries and universities are enacted. These systems have been operated considering the needs of JAEA's program, industry and academia, resultantly contributed, for example, to basic research and the project development. Activities under these systems contain personal exchanges, the publication of the accomplishments and utilization of those, in R&D concerning geological disposal technology of HLW. These activities have progressed in PNC and JNC, through JAEA. The accomplishments from these systems have contributed to the advancement of the national program on the geological disposal of HLW. In this report, the progress of the R&D under these systems was investigated from the beginning of their operation. The contribution to the R&D on geological disposal technology of HLW was also studied. On the basis of these studies, the future utilization of the systems of the collaboration was also discussed.