Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ikeda, Yoshimasa*; Taketani, Atsushi*; Takamura, Masato*; Sunaga, Hideyuki*; Kumagai, Masayoshi*; Oba, Yojiro*; Otake, Yoshie*; Suzuki, Hiroshi
Nuclear Instruments and Methods in Physics Research A, 833, p.61 - 67, 2016/10
Times Cited Count：38 Percentile：96.62(Instruments & Instrumentation)A compact accelerator-based neutron source has been lately discussed on engineering applications such as transmission imaging and small angle scattering as well as reflectometry. However, nobody considers using it for neutron diffraction experiment because of its low neutron flux. In this study, therefore, the neutron diffraction experiments are carried out using Riken Accelerator-driven Compact Neutron Source (RANS), to clarify the capability of the compact neutron source for neutron engineering diffraction. The diffraction pattern from a ferritic steel was successfully measured by suitable arrangement of the optical system to reduce the background noise, and it was confirmed that the recognizable diffraction pattern can be measured by the large sampling volume with 10 mm in cubic for an acceptable measurement time, i.e. 10 minutes. The minimum resolution of the 110 reflection for RANS is approximately 2.5 % at 8 
s of the proton pulse width, which is insufficient to perform the strain measurement by neutron diffraction. The moderation time width at the wavelength corresponding to the 110 reflection is estimated to be approximately 30 s, which is the most dominant factor to determine the resolution. Therefore, refinements of the moderator system to decrease the moderation time are important to improve the resolution of the diffraction experiment using the compact neutron source. In contrast, the texture evolution due to plastic deformation was successfully observed by measuring a change in the diffraction peak intensity by RANS. Furthermore, the volume fraction of the austenite phase was also successfully evaluated by fitting the diffraction pattern using a Rietveld code. Consequently, RANS was proved to be capable for neutron engineering diffraction aiming for the easy access measurement of the texture and the amount of retained austenite.
Sunaga, Hideyuki*; Takamura, Masato*; Ikeda, Yoshimasa*; Otake, Yoshie*; Hama, Takayuki*; Kumagai, Masayoshi*; Suzuki, Hiroshi; Suzuki, Shinsuke*
Journal of Physics; Conference Series, 734(Part B), p.032027_1 - 032027_4, 2016/09
Times Cited Count：0 Percentile：0.03(Physics, Applied)A neutron diffraction measurement was performed to reveal microstructural aspects of the ductile fracture in ferritic steel. The diffraction patterns were continuously measured at the center of the reduced area while a tensile specimen was loaded under tension until the end of the fracture process. The measurement results showed that the volume fraction of (110)-oriented grains increased when the texture evolved as a result of plastic deformation. But the mechanism of texture evolution may be changed during necking, decreasing an increase rate of the volume fraction.
Takamura, Masato*; Ikeda, Yoshimasa*; Sunaga, Hideyuki*; Taketani, Atsushi*; Otake, Yoshie*; Suzuki, Hiroshi; Kumagai, Masayoshi*; Hama, Takayuki*; Oba, Yojiro*
Journal of Physics; Conference Series, 734(Part B), p.032047_1 - 032047_4, 2016/08
Times Cited Count：5 Percentile：86.44(Physics, Applied)Neutron diffraction is well known to be a useful technique for measuring a bulk texture of metallic materials taking advantage of a large penetration depth of the neutron beam. However, this technique has not been widely utilized for the texture measurement because large facilities like a reactor or a large accelerator are required in general. In contrast, RANS (Riken Accelerator-driven Compact Neutron Source) has been developed as a neutron source which can be used easily in laboratories. In this study, texture evolution in steel sheets with plastic deformation was successfully measured using RANS. The results show the capability of the compact neutron source for the analysis of the crystal structure of metallic materials, which leads us to a better understanding of plastic deformation behavior.
Kaira, Kyoichi*; Sunose, Yutaka*; Ohshima, Yasuhiro; Ishioka, Noriko; Arakawa, Kazuhisa*; Ogawa, Tetsushi*; Sunaga, Noriaki*; Shimizu, Kimihiro*; Tominaga, Hideyuki*; Oriuchi, Noboru*; et al.
BMC Cancer, 13, p.482_1 - 482_12, 2013/10
Times Cited Count：74 Percentile：88.89(Oncology)