Precise determination of C level structure by -ray spectroscopy

Hosomi, Kenji; Ma, Y.*; Ajimura, Shuhei*; Aoki, Kanae*; Dairaku, Seishi*; Fu, Y.*; Fujioka, Hiroyuki*; Futatsukawa, Kenta*; Imoto, Wataru*; Kakiguchi, Yutaka*; et al.

Progress of Theoretical and Experimental Physics (Internet), 2015(8), p.081D01_1 - 081D01_8, 2015/08

https://doi.org/10.1093/ptep/ptv113

Level structure of the C hypernucleus was precisely determined by means of -ray spectroscopy. We identified four -ray transitions via the C reaction using a germanium detector array, Hyperball2. The spacing of the ground-state doublet was measured to be (stat) (syst)keV from the direct transition. Excitation energies of the and states were measured to be , keV and , keV, respectively. The obtained level energies provide definitive references for the reaction spectroscopy of hypernuclei.

Disassembly of JT-60 tokamak device and ancillary facilities for JT-60 tokamak

Okano, Fuminori; Ichige, Hisashi; Miyo, Yasuhiko; Kaminaga, Atsushi; Sasajima, Tadayuki; Nishiyama, Tomokazu; Yagyu, Junichi; Ishige, Yoichi; Suzuki, Hiroaki; Komuro, Kenichi; et al.

JAEA-Technology 2014-003, 125 Pages, 2014/03

JAEA-Technology-2014-003.pdf:13.32MB

The disassembly of JT-60 tokamak device and its peripheral equipments, where the total weight was about 5400 tons, started in 2009 and accomplished in October 2012. This disassembly was required process for JT-60SA project, which is the Satellite Tokamak project under Japan-EU international corroboration to modify the JT-60 to the superconducting tokamak. This work was the first experience of disassembling a large radioactive fusion device based on Radiation Hazard Prevention Act in Japan. The cutting was one of the main problems in this disassembly, such as to cut the wielded parts together with toroidal field coils, and to cut the vacuum vessel into two. After solving these problems, the disassembly completed without disaster and accident. This report presents the outline of the JT-60 disassembly, especially tokamak device and ancillary facilities for tokamak device.

Assembly work and transport of JT-60SA cryostat base

Okano, Fuminori; Masaki, Kei; Yagyu, Junichi; Shibama, Yusuke; Sakasai, Akira; Miyo, Yasuhiko; Kaminaga, Atsushi; Nishiyama, Tomokazu; Suzuki, Sadaaki; Nakamura, Shigetoshi; et al.

JAEA-Technology 2013-032, 32 Pages, 2013/11

JAEA-Technology-2013-032.pdf:8.86MB

Japan Atomic Energy Agency started to construct a fully superconducting tokamak experiment device, JT-60SA, to support the ITER since January, 2013 at the Fusion Research and Development Directorate in Naka, Japan. The JT-60SA will be constructed with enhancing the previous JT-60 infrastructures, in the JT-60 torus hall, where the ex-JT-60 machine was disassembled. The JT-60SA Cryostat Base, for base of the entire tokamak structure, were assembly as first step of this construction. The Cryostat Base (CB, 250 tons) is consists of 7 main made of stainless steel, 12m diameter and 3m height. It was built in the Spain and transported to the Naka site with the seven major parts split, via Hitachi port. The assembly work of these steps, preliminary measurements, sole plate adjustments of its height and flatness, and assembly of the CB. Introduces the concrete result of assembly work and transport of JT-60SA cryostat base.

Electrooxidation of hydrazine hydrate using Ni-La catalyst for anion exchange membrane fuel cells

Sakamoto, Tomokazu*; Asazawa, Koichiro*; Martinez, U.*; Halevi, B.*; Suzuki, Toshiyuki*; Arai, Shigeo*; Matsumura, Daiju; Nishihata, Yasuo; Atanassov, P.*; Tanaka, Hirohisa*

Journal of Power Sources, 234, p.252 - 259, 2013/07

https://doi.org/10.1016/j.jpowsour.2013.01.181

Preparation and evaluation of reference materials (LSD spikes), 2; Evaluation

Sumi, Mika; Takamatsu, Mai*; Ebisawa, Noriyuki; Abe, Katsuo; Kageyama, Tomio; Chiba, Masahiko; Nakazawa, Hiroaki; Suzuki, Toru; Katchi, Tomokazu*; Kushigeta, Yoshiyuki*; et al.

no journal, , 

Standard material which called Large Size Dried (LSD) spikes is required for Plutonium and Uranium measurement by Isotope Dilution Mass Spectrometry (IDMS). Collaboration work between JAEA and JNFL is performed to validate efficient use of standard material (primary) and to evaluate the effectivity of the Pu which separated and purified from MOX stored at JAEA. According to the presentation "Preparation and evaluation of reference materials (LSD spikes) (1) Preparation and testing", uncertainty of the actual sample measurements at Rokkasho Reprocessing plant are evaluated with GUM. Also, the effectivity of the half sized LSD spikes from generally used at JAEA and LSD spikes which prepared from Pu purified from MOX at JAEA are statistically evaluated and validated.

Development of volume reduction equipment for radioactive waste

Ichise, Kenichi; Sakuraba, Naotoshi; Suzuki, Kazuhiro; Miyata, Seiichi; Komiya, Tomokazu; Nishi, Masahiro; Kitagawa, Isamu; Numata, Masami

no journal, , 

As a part of measures to reduce radioactive wastes, which are generated during operation and maintenance of Waste Safety Testing Facility (WASTEF), we developed volume reduction equipment for and wastes. In this presentation, we report manufacture of an experimental model, its operativeness & verification of reduction effect in a mock-up test, improvements, and application to actual radioactive wastes.

Study of assembly metrology for JT-60SA

Yagyu, Junichi; Masaki, Kei; Suzuki, Sadaaki; Nishiyama, Tomokazu; Nakamura, Shigetoshi; Saeki, Hisashi; Hoshi, Ryo; Sawai, Hiroaki; Hasegawa, Koichi; Arai, Takashi; et al.

no journal, , 

no abstracts in English