Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kawasaki, Kohei; Ono, Takanori; Shibanuma, Kimikazu; Goto, Kenta; Aita, Takahiro; Okamoto, Naritoshi; Shinada, Kenta; Ichige, Hidekazu; Takase, Tatsuya; Osaka, Yuki; et al.
JAEA-Technology 2022-031, 91 Pages, 2023/02
JAEA-Technology-2022-031.pdf:6.57MB
The document for back-end policy opened to the public in 2018 by Japan Atomic Energy Agency (hereafter, JAEA) states the decommissioning of facilities of Nuclear Fuel Cycle Engineering Laboratories and JAEA have started gathering up nuclear fuel material of the facilities into Plutonium Fuel Production Facilities (hereafter, PFPF) in order to put it long-term, stable and safe storage. Because we planned to manufacture scrap assemblies almost same with Monju fuel assembly using unsealed plutonium-uranium mixed-oxide (hereafter, MOX) powder held in PFPF and transfer them to storage facilities as part of this "concentration" task of nuclear fuel material, we obtained permission to change the use of nuclear fuel material in response to the new regulatory Requirements in Japan for that. The amount of plutonium (which is neither sintered pellets nor in a lidded powder-transport container) that could be handled in the pellet-manufacturing process was limited to 50 kg Pu or less in order to decrease the facility risk in this manufacture. Therefore, we developed and installed the "MOX weighing and blending equipment" corresponding with small batch sizes that functioned in a starting process and the equipment would decrease handling amounts of plutonium on its downstream processes. The failure data based on our operation and maintenance experiences of MOX fuel production facilities was reflected in the design of the equipment to further improve reliability and maintainability in this development. The completed equipment started its operation using MOX powder in February 2022 and the design has been validated through this half-a-year operation. This report organizes the knowledge obtained through the development of the equipment, the evaluation of the design based on the half-a-year operation results and the issues in future equipment development.
Watanabe, Seiya*; Kawahara, Jun*; Aoki, Takayuki*; Sugihara, Kenta; Takase, Shinsuke*; Moriguchi, Shuji*; Hashimoto, Hirotada*
Engineering Applications of Computational Fluid Mechanics, 17(1), p.2211143_1 - 2211143_23, 2023/00
Times Cited Count：1 Percentile：56.82(Engineering, Multidisciplinary)In tsunami inundations or slope disasters of heavy rain, a lot of floating debris or driftwood logs are included in the flows. The damage to structures from solid body impacts is more severe than the damage from the water pressure. In order to study free-surface flows that include floating debris, developing a high-accurate simulation code of free-surface flows with high performance for large-scale computations is desired. We propose the single-phase free-surface flow model based on the cumulant lattice Boltzmann method coupled with a particle-based rigid body simulation. The discrete element method calculates the contact interaction between solids. An octree-based AMR (Adaptive Mesh Refinement) method is introduced to improve computational accuracy and time-to-solution. High-resolution grids are assigned near the free surfaces and solid boundaries. We conducted two kinds of tsunami flow experiments in the 15 and 70 m water tanks at Hachinohe Institute of Technology and Kobe University to validate the accuracy of the proposed model. The simulation results have shown good agreement with the experiments for the drifting speed, the number of trapped wood pieces, and the stacked angles.
Oda, Chie; Kawama, Daisuke*; Shimizu, Hiroyuki*; Benbow, S. J.*; Hirano, Fumio; Takayama, Yusuke; Takase, Hiroyasu*; Mihara, Morihiro; Honda, Akira
Journal of Advanced Concrete Technology, 19(10), p.1075 - 1087, 2021/10
Times Cited Count：0 Percentile：0(Construction & Building Technology)Concrete in a transuranic (TRU) waste repository is considered a suitable material to ensure safety, provide structural integrity and retard radionuclide migration after the waste containers fail. In the current study, coupling between chemical, mass-transport and mechanical, so-called non-linear processes that control concrete degradation and crack development were investigated by coupled numerical models. Application of such coupled numerical models allows identification of the dominant non-linear processes that will control long-term concrete degradation and crack development in a TRU waste repository.
Benbow, S. J.*; Kawama, Daisuke*; Takase, Hiroyasu*; Shimizu, Hiroyuki*; Oda, Chie; Hirano, Fumio; Takayama, Yusuke; Mihara, Morihiro; Honda, Akira
Crystals (Internet), 10(9), p.767_1 - 767_33, 2020/09
Times Cited Count：2 Percentile：26.13(Crystallography)Details are presented of the development of a coupled modeling simulator for assessing the evolution in the near-field of a geological repository for radioactive waste disposal where concrete is used as a backfill. The simulator uses OpenMI, a standard for exchanging data between simulation software programs at run-time, to form a coupled chemical-mechanical-hydrogeological model of the system. The approach combines a tunnel scale stress analysis finite element model, a discrete element model for accurately modeling the patterns of emerging cracks in the concrete, and a finite element and finite volume model of the chemical processes and alteration in the porous matrix and cracks in the concrete, to produce a fully coupled model of the system. Combining existing detailed simulation software in this way with OpenMI has the benefit of not relying on simplifications that might be necessary to combine all of the modeled processes in a single piece of software.
Ono, Hitomi*; Takenaka, Keisuke*; Kita, Tomoaki*; Taniguchi, Masashi*; Matsumura, Daiju; Nishihata, Yasuo; Hino, Ryutaro; Reinecke, E.-A.*; Takase, Kazuyuki*; Tanaka, Hirohisa*
E-Journal of Advanced Maintenance (Internet), 11(1), p.40 - 45, 2019/05
Suzuki, Eriko; Takase, Gaku; Nakajima, Kunihisa; Nishioka, Shunichiro; Hashimoto, Naoyuki*; Isobe, Shigehito*; Osaka, Masahiko
Proceedings of International Topical Workshop on Fukushima Decommissioning Research (FDR 2019) (Internet), 4 Pages, 2019/05
In order to acquire the knowledge of the Cs chemisorption behaviour in the lower temperature region, the Cs chemisorbed compounds and the surface reaction rates were investigated by conducting the Cs chemisorption tests onto stainless steel at 873 and 973 K. As a result, The cesium ferrate compounds were revealed to be formed at this temperatures. It was seen that the dependences of surface reaction rate constant on this temperature were different from that at the higher temperature region. This behaviour leads to the conclusion that the Cs chemisorption model in the low temperature region should be newly constructed.
McKinley, I. G.*; Masuda, Sumio*; Hardie, S. M. L.*; Umeki, Hiroyuki*; Naito, Morimasa; Takase, Hiroyasu*
Journal of Energy, 2018, p.7546158_1 - 7546158_8, 2018/07
The Japanese geological disposal programme for radioactive waste is based on a volunteering approach to siting, which places particular emphasis on the need for public acceptance. This emphasises the development of a repository project as a partnership with local communities and involves stakeholders in important decisions associated with key milestones in the selection of repository sites and subsequent construction, operation and closure. To date, however, repository concept development has proceeded in a more traditional manner, focusing particularly on ease of developing a post-closure safety case. In the current project, we have attempted to go further by assessing what requirements stakeholders would place on a repository and assessing how these could be used to re-think repository designs so that they meet the desires of the public without compromising critical operational or long-term safety.
Nakayama, Shinichi; Okumura, Masahiko*; Nagasaki, Shinya*; Enokida, Yoichi*; Umeki, Hiroyuki*; Takase, Hiroyasu*; Kawasaki, Daisuke*; Hasegawa, Shuichi*; Furuta, Kazuo*
Genshiryoku Bakkuendo Kenkyu (CD-ROM), 23(2), p.131 - 148, 2016/12
A symposium "Science of nuclear fuel cycle and backend - Research and education -" was held at the Univer-sity of Tokyo in June 25, 2016. This aimed at developing the research on nuclear fuel cycle and backend. The time and the number of participants of the symposium were limited, but the active discussion was conducted, and the common perception for the future was shared among the experienced participants in those fields. This paper provides the discussions made in the symposium, and also, as a memory to Professor Ahn, the University of California, Berkeley, his prominent achievements in academic research and education.
Uesawa, Shinichiro; Liu, W.; Jiao, L.; Nagatake, Taku; Takase, Kazuyuki; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Nihon Genshiryoku Gakkai Wabun Rombunshi, 15(4), p.183 - 191, 2016/12
no abstracts in English
Jiao, L.; Liu, W.; Nagatake, Taku; Uesawa, Shinichiro; Shibata, Mitsuhiko; Yoshida, Hiroyuki; Takase, Kazuyuki*
Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 11 Pages, 2016/10
4 rod bundleLiu, W.; Jiao, L.; Nagatake, Taku; Shibata, Mitsuhiko; Komatsu, Masao*; Takase, Kazuyuki*; Yoshida, Hiroyuki
Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 10 Pages, 2016/10
To contribute the clarification of the Fukushima Daiichi Accident, Japan Atomic Energy Agency (JAEA) has been performed experiments to obtain void fraction distribution data, including detailed bubble information such as bubble velocity and size, in steam-water two-phase flow in rod bundle geometry under high pressure and high temperature condition, focusing on low flow rate at the core natural circulation flow condition after the reactor scram. In this research, experimental apparatus for measuring void fraction distribution in the 44 rod bundle was constructed. To measure the void fraction distribution under high pressure and high temperature condition (up to 2.8 MPa, 232 
C), two wire mesh sensors (WMSs) were installed. To confirm the applicability of the installed WMSs and the measuring system for two-phase flow in rod bundle, experiments in air-water two-phase flow under atmospheric pressure and room temperature were performed. As a result, it was confirmed that the installed WMSs can be applicable to the two-phase flow in rod bundle. Measured results, such as instantaneous and time-averaged void fraction distribution in the rod bundle, average void fraction across the cross section of the flow channel, bubble length and velocity, were also reported.
Nagatake, Taku; Takase, Kazuyuki*; Yoshida, Hiroyuki
Dai-21-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (USB Flash Drive), 2 Pages, 2016/06
no abstracts in English
Yamashita, Susumu; Tokushima, Kazuyuki; Kurata, Masaki; Takase, Kazuyuki; Yoshida, Hiroyuki
Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 5 Pages, 2016/06
In order to precisely investigate molten core relocation behavior in the Fukushima Daiichi Nuclear Power Station, we have developed the detailed and phenomenological numerical simulation code named JUPITER for predicting the molten core behavior including solidification and relocation based on the three-dimensional multiphase thermal-hydraulic simulation models. At the moment, multicomponent analysis method which can be treated any number of component as a fluid or solid body, Zr-water reaction model and simple radiation heat transfer model were implemented and showed that multicomponent melt flow and its solidification were confirmed in the simplified core structure system. However, the validation of the JUPITER using high temperature molten material has not been performed yet. In this paper, in order to evaluate the validity of the JUPITER, especially, for high temperature melt relocation experiment, we compared between numerical and experimental results for that system. As a result, qualitatively reasonable result was obtained. And also we performed melt relocation simulation on actual core structures designed by three dimensional CAD (Computer-Aided Design) and then we estimated phenomena which might be actually occurred in SAs.
4 bundle at 2 MPaLiu, W.; Nagatake, Taku; Shibata, Mitsuhiko; Takase, Kazuyuki; Yoshida, Hiroyuki
Transactions of the American Nuclear Society, 114, p.875 - 878, 2016/06
To contribute to the clarification of the Fukushima Daiichi Accident, JAEA is working on getting instantaneous void fraction distribution data in steam water two - phase flow in rod bundle geometry under high pressure, high temperature condition, with using Wire Mesh Sensor (WMS) developed at JAEA for high pressure, high temperature condition, focusing on the low flow rate condition after the reactor scram. This paper reports the experimental results for the measured void fraction distribution in steam vapor two-phase flow in a 4 4 bundle under 1.6 MPa (202 C), 2.1 MPa (215 C) and 2.6 MPa (226 C) conditions. The data is expected to be used in the validation of the detailed two-phase flow codes TPFIT and ACE3D developed at JAEA. The time and space averaged void fraction data is also expected being used in the validation of the drift flux models implemented in the two fluids codes, such as TRACE code.
Uto, Hiroyasu; Takase, Haruhiko; Sakamoto, Yoshiteru; Tobita, Kenji; Mori, Kazuo; Kudo, Tatsuya; Someya, Yoji; Asakura, Nobuyuki; Hoshino, Kazuo; Nakamura, Makoto; et al.
Fusion Engineering and Design, 103, p.93 - 97, 2016/02
Times Cited Count：8 Percentile：59.95(Nuclear Science & Technology)Conceptual design of in-vessel component including conducting shell has been investigated in Broader Approach (BA) DEMO design activities, in order to propose feasible DEMO reactor from plasma vertical stability and engineering viewpoint. The conducting shell for the plasma vertical stability will be incorporated behind blanket module, while the location must be close to the plasma surface as possible for the plasma stabilization. We evaluated dependence of the plasma vertical stability on the conducing shell parameters by using a 3-dimensional eddy current analysis code (EDDYCAL). The calculation results showed that the conducting shell requires more than 0.01 m thickness of Cu-alloy on DEMO. On the other hand, the electromagnetic force at the plasma disruption is a few times larger than no conducting shell case because of larger eddy current on conducting shell. The engineering design issues of in-vessel components for plasma vertical stability are presented.
Takase, Kazuyuki
Nihon Genshiryoku Gakkai-Shi ATOMO
, 57(11), P. 747, 2015/11
no abstracts in English
Uesawa, Shinichiro; Nagatake, Taku; Jiao, L.; Liu, W.; Takase, Kazuyuki; Yoshida, Hiroyuki
Proceedings of International Conference on Power Engineering 2015 (ICOPE 2015) (CD-ROM), 11 Pages, 2015/11
Yoshida, Hiroyuki; Uesawa, Shinichiro; Nagatake, Taku; Jiao, L.; Liu, W.; Takase, Kazuyuki
Proceedings of International Conference on Power Engineering 2015 (ICOPE 2015) (CD-ROM), 9 Pages, 2015/11
Yamashita, Susumu; Tokushima, Kazuyuki; Kurata, Masaki; Takase, Kazuyuki; Yoshida, Hiroyuki
Nihon Kikai Gakkai Dai-28-Kai Keisan Rikigaku Koenkai Rombunshu (CD-ROM), 3 Pages, 2015/10
no abstracts in English
Ozu, Akira; Takase, Misao*; Haruyama, Mitsuo; Kurata, Noritaka*; Kobayashi, Nozomi*; Kureta, Masatoshi; Nakamura, Tatsuya; To, Kentaro; Sakasai, Kaoru; Suzuki, Hiroyuki; et al.
Nuclear Instruments and Methods in Physics Research A, 798, p.62 - 69, 2015/10
Times Cited Count：2 Percentile：17.52(Instruments & Instrumentation)The light transport properties of scintillator light inside alternative He-3 neutron detector modules using scintillator sheets have been investigated by a ray-tracing simulation code. The detector module consists of a light-reflecting tube, a thin rectangular ceramic scintillator sheet laminated on a glass plate, and two photo-multiplier tubes (PMTs) mounted at both ends of the detector tube. The light induced on the surface of the scintillator sheet via nuclear interaction between the scintillator and neutrons are detected by the two PMTs. The light output of various detector modules in which the scintillator sheets are installed with several different arrangements were examined and evaluated in comparison with experimental results. The results derived from the simulation reveal that the light transport property is strongly dependent on the arrangement of the scintillator sheet inside the tube and the shape of the tube.
