Extraction of Se(iv) and Se(vi) from aqueous HCl solution by using a diamide-containing tertiary amine

Narita, Hirokazu*; Maeda, Motoki*; Tokoro, Chiharu*; Suzuki, Tomoya*; Tanaka, Mikiya*; Shiwaku, Hideaki; Yaita, Tsuyoshi

RSC Advances (Internet), 13(25), p.17001 - 17007, 2023/06

https://doi.org/10.1039/D3RA01341C

no abstracts in English

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

Unique anion-exchange properties of 3,3'-diaminobenzidine resulting in high selectivity for rhodium(III) over palladium(II) and platinum(IV) in a concentrated hydrochloric acid solution

Suzuki, Tomoya*; Ogata, Takeshi*; Tanaka, Mikiya*; Kobayashi, Toru; Shiwaku, Hideaki; Yaita, Tsuyoshi; Narita, Hirokazu*

Analytical Sciences, 35(12), p.1353 - 1360, 2019/12

https://doi.org/10.2116/analsci.19P204

no abstracts in English

Speciation of ruthenium(III) chloro complexes in hydrochloric acid solutions and their extraction characteristics with an amide-containing amine compound

Suzuki, Tomoya*; Ogata, Takeshi*; Tanaka, Mikiya*; Kobayashi, Toru; Shiwaku, Hideaki; Yaita, Tsuyoshi; Narita, Hirokazu*

Metals, 8(7), p.558_1 - 558_10, 2018/07

AA2018-0670.pdf:2.11MB

https://doi.org/10.3390/met8070558

The refining of platinum group metals is based mainly on solvent extraction methods, whereas Ru is selectively recovered by distillation as RuO. Replacement of distillation byextraction is expected to simplify the purification process. To develop an effective extraction system for Ru, we analyzed the Ru species in HCl with UV-Vis and EXAFS spectroscopies, and we examined the properties of Ru extracted with N-2-ethylhexyl-bis(N-di-2-ethylhexyl-ethylamide) amine (EHBAA). EXAFS and UV-Vis spectra of Ru in HCl solutions revealed that the predominant Ru species in 0.5-10 M HCl solutions changed from [RuCl(HO)] to [RuCl] with the HCl concentration. The extraction percentages of Ru in the EHBAA system increased with increasing HCl concentration, reached 80% at [HCl] = 5 M, and decreased athigher HCl concentrations. EXAFS analysis of the extracted complex indicated that the Ru had 5 Cl and 1 HO in its inner coordination sphere. The similarity of the dependence on HCl concentrations of the extraction in the EHBAA system and the distribution profile of [RuCl(HO)] on [RuCl(HO)] suggested that the EHBAA extracted the pentachlorido species.

Selective extraction of Pt(IV) over Fe(III) from HCl with an amide-containing tertiary amine compound

Maeda, Motoki*; Narita, Hirokazu*; Tokoro, Chiharu*; Tanaka, Mikiya*; Motokawa, Ryuhei; Shiwaku, Hideaki; Yaita, Tsuyoshi

Separation and Purification Technology, 177, p.176 - 181, 2017/04

https://doi.org/10.1016/j.seppur.2017.01.002

High-resolution Compton cameras based on Si/CdTe double-sided strip detectors

Odaka, Hirokazu*; Ichinohe, Yuto*; Takeda, Shinichiro*; Fukuyama, Taro*; Hagino, Koichi*; Saito, Shinya*; Sato, Tamotsu*; Sato, Goro*; Watanabe, Shin*; Kokubun, Motohide*; et al.

Nuclear Instruments and Methods in Physics Research A, 695, p.179 - 183, 2012/12

https://doi.org/10.1016/j.nima.2011.12.061

We have developed a new Si/CdTe semiconductor double-sided strip detector (DSD) Compton camera. The camera consists of a 500-m-thick Si-DSD and four layers of 750-m-thick CdTe-DSDs all of which have common electrode configuration segmented into 128 strips on each side with pitches of 250m. In order to realize high angular resolution and to reduce size of the detector system, a stack of DSDs with short stack pitches of 4 mm is utilized to make the camera. Taking advantage of the excellent energy and position resolutions of the semiconductor devices, the camera achieves high angular resolutions of 4.5 degrees at 356 keV and 3.5 degrees at 662 keV. To obtain such high resolutions together with an acceptable detection efficiency, we demonstrate data reduction methods including energy calibration using Compton scattering continuum and depth sensing in the CdTe-DSD. We also discuss imaging capability of the camera and show simultaneous multi-energy imaging.

Applications and imaging techniques of a Si/CdTe Compton -ray camera

Takeda, Shinichiro*; Ichinohe, Yuto*; Hagino, Koichi*; Odaka, Hirokazu*; Yuasa, Takayuki*; Ishikawa, Shinnosuke*; Fukuyama, Taro*; Saito, Shinya*; Sato, Tamotsu*; Sato, Goro*; et al.

Physics Procedia, 37, p.859 - 866, 2012/10

https://doi.org/10.1016/j.phpro.2012.04.096

By using new Compton camera consisting of silicon double-sided strip detector (Si-DSD) and CdTe-DSD developed for the ASTRO-H mission, an experiment was conducted to study its feasibility for advanced hotspot monitoring. In addition to hotspot imaging already provided by commercial imaging systems, the identification of the variety of radioisotopes is realized thanks to the good energy resolution given by the semiconductor detectors. Three radioisotopes of Ba (356 keV), Na (511 keV) and Cs (662 keV) were individually imaged by applying event selection in the energy window and the -ray images was correctly overlapped by an optical picture. The detection efficiency of 1.6810 (effective area: 1.710 cm) and angular resolution of 3.8 were obtained by stacking five detector modules for 662 keV -ray. The higher detection efficiency required in a specific use can be achieved by stacking more detector modules.

The JAEA grouting test at the Grimsel test site; Numerical simulation of the grout injection process of silica sol in fractured rock mass

Koyama, Tomofumi*; Onishi, Yuzo*; Bruines, P.*; Tanaka, Tatsuya*; Hasui, Akinori*; Katayama, Tatsuo*; Kishi, Hirokazu; Kuzuha, Yuji

Proceedings of 2012 ISRM International Symposium; Rock Engineering and Technology for Sustainable Underground Construction (EUROCK 2012) (USB Flash Drive), 10 Pages, 2012/05

Grouting, which involves injection of grout material, is commonly used to decrease the hydraulic conductivity of the fractured rock masses and control the groundwater inflow. However, the mechanism of grout injection process has not been clarified sufficiently yet due to complicated chemical and physical processes of grout. In this study, to simulate the grout injection process, the three-dimensional numerical model based on equivalent continuum approach was developed.

Tolerance of anhydrobiotic eggs of the tardigrade to extreme environments

Horikawa, Daiki*; Yamaguchi, Ayami*; Sakashita, Tetsuya; Tanaka, Daisuke*; Hamada, Nobuyuki*; Yukuhiro, Fumiko*; Kuwahara, Hirokazu*; Kunieda, Takekazu*; Watanabe, Masahiko*; Nakahara, Yuichi*; et al.

Astrobiology, 12(4), p.283 - 289, 2012/04

https://doi.org/10.1089/ast.2011.0669

We examined the hatchability of hydrated and anhydrobiotic eggs of the tardigrade to hatch after ionizing irradiation (helium ions), extremely low and high temperatures, and high vacuum. Anhydrobiotic eggs (50% lethal dose; 1690 Gy) were substantially more radioresistant than hydrated ones (50% lethal dose; 509 Gy). Anhydrobiotic eggs also have a broader temperature resistance compared with hydrated ones. Over 70% of the anhydrobiotic eggs treated at high and low temperatures, but all of the hydrated eggs failed to hatch. After exposure to high vacuum conditions, the hatchability of the anhydrobiotic eggs was comparable to that of untreated control eggs.

Mix design of low pH cement shotcrete in high level radioactive waste repositories

Noguchi, Akira; Kishi, Hirokazu; Hatanaka, Koichiro; Naito, Morimasa

Proceedings of 19th International Conference on Nuclear Engineering (ICONE-19) (CD-ROM), 6 Pages, 2011/10

A standardized method for choosing a mix design of low pH shotcrete is proposed for their intended use in the construction of a High Level Radioactive Waste (HLW) repository in order to be applied to the various geological environment of the location of the HLW repositories. There are two improvement in this method. One is estimating binder composition to satisfy low pH. The other is estimating water bender ratio to satisfy the strength of sprayed concrete. The method uses a sequential development process with consideration given to a number of physicochemical requirements, incorporates current shotcrete technology. The method is demonstrated in its entirety through a series of experiments and tests using a low pH cement binder comprised of a mixture of ordinary Portland cement, fly ash (FA) and silica fume (SF), referred to here as high-volume FA SF cement (HFSC). Moreover, the method is referred from the demonstration of HFSC shotcrete in Horonobe underground research laboratory.