Sodium-cooled Fast Reactors

Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.

Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07

https://shop.elsevier.com/books/sodium-cooled-fast-reactors/morishita/978-0-12-824076-2

This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.

Initial oxidation kinetics of Si(113)-(32) investigated using supersonic seeded molecular beams

Ono, Shinya*; Tanaka, Kazuma*; Kodama, Hiraku*; Tanaka, Masatoshi*; Yoshigoe, Akitaka; Teraoka, Yuden*

Surface Science, 697, p.121600_1 - 121600_6, 2020/07

https://doi.org/10.1016/j.susc.2020.121600

The initial oxidation on silicon surfaces with (113) orientation has been investigated by high-resolution photoelectron spectroscopy with synchrotron radiation. In the present study, we investigated both the Si2p state and O1s state to evaluate the oxide thickness, composition, and to assess the strain at the SiO/Si interface. In the Si2p state, the oxidized components (Si, Si, Si, Si) were analyzed. In the O1s state, a low-binding-energy component (LBC) and a high-binding-energy component (HBC) were analyzed. To investigate the non-thermal oxidation process, we utilized the supersonic seeded molecular beam (SSMB) to enhance the translational kinetic energies () of oxygen molecules. We demonstrate that the oxide quality and oxidation kinetics are largely altered by changing .

Pulsed pressure induced cavitation erosion in mercury narrow channel under flowing conditions

Naoe, Takashi; Kogawa, Hiroyuki; Tanaka, Nobuatsu*; Futakawa, Masatoshi

Advanced Experimental Mechanics, 4, p.17 - 21, 2019/08

We have introduced the following two techniques to mitigate the pressure wave-induced cavitation damage in the mercury target. One is the gas microbubble injection into the flowing mercury, and the other is the double-walled structure with a narrow gap channel at the proton beam entrance portion of the mercury vessel. The latter is expected to mitigate the cavitation damage due to the high-speed liquid flow ( 4 m/s) and the narrow gap boundary (2 mm). To quantitatively investigate the effect of double-walled structure on cavitation damage, cavitation damage tests were conducted by parametrically changing mercury flow velocity and gap width of the channel wall. The results showed that the damage evaluated as a surface roughness was reduced by increasing the flow velocity. By contrast, the effect of gap width on cavitation damage was hardly observed under flowing conditions.

Development on laser cutting technique to suppress spatter particles aiming at disposal of radio-active waste

Naoe, Takashi; Teshigawara, Makoto; Futakawa, Masatoshi; Mizutani, Haruki; Muramatsu, Toshiharu; Yamada, Tomonori; Ushitsuka, Yuji*; Tanaka, Nobuatsu*; Yamasaki, Kazuhiko*

Proceedings of 8th International Congress on Laser Advanced Materials Processing (LAMP 2019) (Internet), 5 Pages, 2019/05

Laser cutting is one of the options in the disposal of radio-active waste, such as spallation neutron target vessel in J-PARC, etc. Due to unique characteristic of laser, such as non-contact system, it is more easily to provide remote-controlled system in comparison with conventional one, such as mechanical cutting machine, etc. However, a demerit of laser cutting is the sputter and fume caused by laser cutting, resulting in contamination with radio-active materials its surroundings. Recently it was developed that the spatter suppression technique by controlling laser beam profile in laser welding process. In order to apply this suppression technique to laser cutting, first of all, we attempted to observe the phenomenon at melting area during laser cutting using a high-speed video camera in order to make the physical model. The result showed that the appearance of fume and sputter were independently confirmed in the time evolution.

Temperature stability of PIN-PMN-PT ternary ceramics during pyroelectric power generation

Moro, Takuya*; Kim, J.*; Yamanaka, Satoru*; Murayama, Ichiro*; Kato, Takanori*; Nakayama, Tadachika*; Takeda, Masatoshi*; Yamada, Noboru*; Nishihata, Yasuo; Fukuda, Tatsuo; et al.

Journal of Alloys and Compounds, 768, p.22 - 27, 2018/11

https://doi.org/10.1016/j.jallcom.2018.07.182

Pyroelectric power generation with ferroelectrics (1-x)PMN-xPT

Kim, J.*; Yamanaka, Satoru*; Nakajima, Akira*; Kato, Takanori*; Kim, Y.*; Fukuda, Tatsuo; Yoshii, Kenji; Nishihata, Yasuo; Baba, Masaaki*; Takeda, Masatoshi*; et al.

Ferroelectrics, 512(1), p.92 - 99, 2017/08

https://doi.org/10.1080/00150193.2017.1349991

Recent progress in the chopper spectrometer 4SEASONS at J-PARC

Kajimoto, Ryoichi; Nakamura, Mitsutaka; Inamura, Yasuhiro; Kamazawa, Kazuya*; Ikeuchi, Kazuhiko*; Iida, Kazuki*; Ishikado, Motoyuki*; Nakajima, Kenji; Kawamura, Seiko; Nakatani, Takeshi; et al.

JAEA-Conf 2015-002, p.319 - 329, 2016/02

https://doi.org/10.11484/jaea-conf-2015-002

Silicon avalanche photodiode linear-array detector with multichannel scaling system for pulsed synchrotron X-ray experiments

Kishimoto, Shunji*; Mitsui, Takaya; Haruki, Rie*; Yoda, Yoshitaka*; Taniguchi, Takashi*; Shimazaki, Shoichi*; Ikeno, Masahiro*; Saito, Masatoshi*; Tanaka, Manobu*

Journal of Instrumentation (Internet), 10(5), p.C05030_1 - C05030_6, 2015/05

https://doi.org/10.1088/1748-0221/10/05/C05030

High power laser developments with femtosecond to nanosecond pulse durations for laser shock science and engineering

Kiriyama, Hiromitsu; Mori, Michiaki; Suzuki, Masayuki*; Daito, Izuru*; Okada, Hajime; Ochi, Yoshihiro; Tanaka, Momoko; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; et al.

Reza Kenkyu, 42(6), p.441 - 447, 2014/06

http://ci.nii.ac.jp/naid/40020137371

We describe three specific high power laser systems that are being developed in our laboratory for many applications in high field science, nonlinear optics and material processing. We report on a femtosecond petawatt-class Ti:sapphire chirped-pulse amplification laser system that can produce a pulse energy of 20 J of 40 fs pulse duration, a picosecond high intensity Yb:YAG chirped-pulse amplification laser system that can generate a pulse energy of 100 mJ of 0.5 ps pulse duration, and a nanosecond high repetition rate Nd:YAG laser system that can provide an average power of 360 W with a pulse duration of 30 ns delivered at a 1 kHz repetition rate. We discuss the basic design aspects and present the results from our experimental investigations of these laser systems.

Review to give the public clear information on near surface disposal project of low-level radioactive wastes generated from research, industrial and medical facilities

Shobu, Nobuhiro; Kato, Masatoshi*; Takao, Tomoe*; Terashima, Daisuke*; Tanaka, Yoshie*; Shirasu, Hisanori*; Amazawa, Hiroya; Koibuchi, Hiroto; Nakata, Hisakazu

JAEA-Review 2013-028, 175 Pages, 2013/12

JAEA-Review-2013-028.pdf:10.13MB

JAEA has promoted near surface disposal project for low-level radioactive wastes generated from research, industrial and medical facilities. JAEA has carried out public information about the project. When some town meetings are held toward mutual understanding with the public more detailed and clear explanations for safety management of the project are needed especially. Therefore, the information provision method to make the public understand should be reviewed. Moreover, a survey should be carried out in order to get a sense of what the public knows, what it values and where it stands on nuclear energy and radiation issues, because the social environment surrounding nuclear energy and radiation issues has changed as a result of the accident at the Fukushima on March 11, 2011. This review clarified the points to keep in mind about public information on the project, and that public recognition or understanding toward nuclear energy and radiation was changed before and after the accident.