Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sano, Naruto; Yamashita, Naoki; Watanabe, Masaya; Tsukada, Manabu*; Hoshino, Kazutoyo*; Hirai, Koki; Ikegami, Yuta*; Tashiro, Shinsuke; Yoshida, Ryoichiro; Hatakeyama, Yuichi; et al.
JAEA-Technology 2023-029, 36 Pages, 2024/03
JAEA-Technology-2023-029.pdf:2.47MB
At the Waste Safety Testing Facility (WASTEF), the gamma ray irradiation device "Gamma Cell 220" was relocated from the 4th research building of the Nuclear Science Research Institute in FY2019, and the use of gamma ray irradiation has begun. Initially, Fuel Cycle Safety Research Group, Fuel Cycle Safety Research Division, Nuclear Safety Research Center, Sector of Nuclear Safety Research and Emergency Preparedness, the owner of this device, conducted the tests as the main user, but since 2022, other users, including those outside the organization, have started using it. The gamma ray irradiation device "Gamma Cell 220" is manufactured by Nordion International Inc. in Canada. Since it was purchased in 1989, the built-in 60Co radiation source has been updated once, and safety research related to nuclear fuel cycles, etc. It is still used for this purpose to this day. This report summarizes the equipment overview of the gamma ray irradiation device "Gamma Cell 220", its permits and licenses at WASTEF, usage status, maintenance and inspection, and future prospects.
Tashiro, Shinsuke; Ono, Takuya; Amano, Yuki; Yoshida, Ryoichiro; Watanabe, Koji*; Abe, Hitoshi
Nuclear Technology, 208(10), p.1553 - 1561, 2022/10
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)To contribute to the confinement safety evaluation of the radioactive materials in the Glove box (GB) fire accident, combustion tests with the Polymethyl methacrylate (PMMA) and the Polycarbonate (PC) as typical panel materials for the GB have been conducted with a relatively large scale apparatus. As the important data for evaluating confinement safety, the release ratio and the particle size distribution of the soot generated from the burned materials were obtained. Furthermore, the rise of the differential pressure (
P) of the high efficiency particle air (HEPA) filter by the soot loading was also investigated. As results, the release ratio of the soot from the PC was about seven times as large as the PMMA. In addition, it was found that the behavior of the rise of the P with soot loading could be represented uniformly regardless of kinds of combustion materials by considering effect of the loading volume of the soot particle in the relatively low loading region.
Tashiro, Shinsuke; Uchiyama, Gunzo; Ono, Takuya; Amano, Yuki; Yoshida, Ryoichiro; Abe, Hitoshi
Nuclear Technology, 208(7), p.1205 - 1213, 2022/07
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)A clogging behavior of a high-efficiency particulate air (HEPA) filter at solvent fire accidents for reprocessing facilities has been studied. In this study, the burning rates of 30% tri-butyl phosphate (TBP)/dodecane (DD) mixed solvent and DD solvent and the differential pressure (P) of a high airflow typed HEPA filter applied in the actual facilities in Japan were measured. It was confirmed that the mainly burned was DD at the early stage of the mixed solvent burning and the TBP at the late stage. Furthermore, it was found that the P rapidly rose at the late stage of the mixed solvent burning. The increase of the release ratio of the unburned particulate composition (TBP, its degraded solvent and inorganic phosphorus (P
O
)) was considered to contribute to the rapid rise. The correlating formulas with the P and the mass of the loading particulates, except for the region of the rapid rise of P, could be induced.
Ono, Takuya; Tashiro, Shinsuke; Amano, Yuki; Yoshida, Naoki; Yoshida, Ryoichiro; Abe, Hitoshi
PLOS ONE (Internet), 16(1), p.e0245303_1 - e0245303_16, 2021/01
Times Cited Count：2 Percentile：11.76(Multidisciplinary Sciences)It is necessary to consider how a glove box's confinement function will be lost when evaluating the amount of radioactive material leaking from a nuclear facility during a fire. In this study, we build a model that consistently explains the weight loss of glove box materials because of heat input from a flame and accompanying generation of the pyrolysis gas. The weight loss suggests thinning of the glove box housing, and the generation of pyrolysis gas suggests the possibility of fire spreading. The target was polymethyl methacrylate (PMMA), used as the glove box panel. Thermal gravimetric tests on PMMA determined the parameters to be substituted in the Arrhenius equation for predicting the weight loss in pyrolysis. The pyrolysis process of PMMA was divided into 3 stages with activation energies of 62 kJ/mol, 250 kJ/mol, and 265 kJ/mol. Furthermore, quantifying the gas composition revealed that the composition of the pyrolysis gas released from PMMA can be approximated as 100 percent methyl methacrylate. This result suggests that the released amount of methyl methacrylate can be estimated by the Arrhenius equation. To investigate the validity of such estimation, a sealed vessel test was performed. In this test, we observed increase of the number of gas molecules during the pyrolysis as internal pressure change of the vessel. The number of gas molecules was similar to that estimated from the Arrhenius equation, and indicated the validity of our method. Moreover, we also performed the same tests on bisphenol-A-polycarbonate (PC) for comparison. In case of PC, the number of gas molecules obtained in the vessel test was higher than the estimated value.
Ono, Takuya; Tashiro, Shinsuke; Amano, Yuki; Yoshida, Ryoichiro; Abe, Hitoshi
Nuclear Technology, 206(1), p.40 - 47, 2020/01
Times Cited Count：2 Percentile：24.28(Nuclear Science & Technology)Recent Japanese nuclear regulations have focused on the hazards of in-cell solvent fires at reprocessing facilities. In this work, a mixture of tributyl phosphate and dodecane-based solvents was burned to generate an aerosol composed of soot and unburned solvent that was then loaded onto a high-efficiency particulate air filter simulating the ventilation system of reprocessing facilities. A radical increase of differential pressure occurred in the filters during these tests after the dodecane burned out from the solvent in a phenomenon we named as rapid clogging, likely caused by the burnout of dodecane. This relationship provides valuable insight into the establishment of new regulations for reprocessing facilities. This work indicates that clogging of ventilation filters during solvent fires may occur more rapidly than previously estimated.
Yoshida, Naoki; Tashiro, Shinsuke; Amano, Yuki; Yoshida, Kazuo; Yamane, Yuichi; Abe, Hitoshi
NEA/CSNI/R(2017)12/ADD1 (Internet), p.293 - 305, 2018/01
The "Evaporation to Dryness due to the Loss of Cooling Functions" (EDLCF) of highly-active liquid waste (HALW) was newly defined as one of the severe accidents in Japan's nuclear safety standard for the reprocessing plant. Studies on accident scenarios and their source terms have led to an increased need for the development of accident management measures and the assessment of their effectiveness. Previous studies have shown that ruthenium was released at a greater rate than other elements because it formed volatile species such as ruthenium tetroxide (RuO
). In addition, ruthenium isotopes, 
Ru and 
Ru, have radiotoxicity. Accordingly, the accident management measures require the experimental information on the release and transport behavior of the gaseous ruthenium (Ru(g)). This paper summarizes our experimental results on the characteristics of Ru(g) in the EDLCF. This work includes the results of the experiments carried out under the agreement among JAEA, Japan Nuclear Fuel Ltd. and Japan Nuclear Energy Safety Organization.
Ono, Takuya; Watanabe, Koji; Tashiro, Shinsuke; Amano, Yuki; Abe, Hitoshi
Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 7 Pages, 2017/07
After the Fukushima-Daiichi accident, countermeasures against the severe accident are newly required as regulatory items for nuclear facilities. Organic solvent fire in cell was defined as one of the accidents in the fuel reprocessing plant. When the solvent burns, aerosols including soot are released. The substances clog HEPA filters in the ventilation system and their breakthrough may happen because of differential pressure rising. Moreover, the fire can also release volatile radioactive gaseous species, which can pass through HEPA filters. These phenomena are important for evaluation of confinement capability of the facility and public exposure. We have investigated, in relating to the clogging behavior, release behavior of aerosols as well as of volatile materials from burnt solvent. In the presentation, we will report experimental data and evaluation results obtained from recent research.
Amano, Yuki; Watanabe, Koji; Masaki, Tomoo; Tashiro, Shinsuke; Abe, Hitoshi
JAEA-Technology 2016-012, 21 Pages, 2016/06
JAEA-Technology-2016-012.pdf:1.81MB
To contribute to safety evaluation of fire accident in fuel reprocessing plants, solvent extraction behavior of ruthenium, which could form volatile species, was investigated. Distribution ratios of ruthenium at fire accident conditions were obtained by extraction experiments with several solvent composition at different temperature as parameters. In order to investigate release behavior of ruthenium and europium at fire accident, release ratios of ruthenium and europium were also obtained by solvent combustion experiments.
Yamane, Yuichi; Amano, Yuki; Tashiro, Shinsuke; Abe, Hitoshi; Uchiyama, Gunzo; Yoshida, Kazuo; Ishikawa, Jun
Journal of Nuclear Science and Technology, 53(6), p.783 - 789, 2016/06
Times Cited Count：5 Percentile：43.41(Nuclear Science & Technology)The release behavior of radioactive materials from high active liquid waste (HALW) has been experimentally investigated under boiling accident conditions. In the experiments using HALW obtained through laboratory scale reprocessing, release ratio was measured for the FP nuclides such as Ru, 
Tc, Cs, Sr, Nd, Y, Mo, Rh and actinides such as 
Cm, 
Am. As a result, the release ratio was 0.20 for Ru and 1
for the FP and Ac nuclides. Ru was released into the gas phase in the form of both mist and gas. For its released amount, weak dependency was found to the initial concentration in the test solution. The release ratio decreased with the initial concentration. For other FP nuclides and actinides as non-volatile, released into the gas phase in the form of mist, the released amount increased with the initial concentration. The release ratio of Ru and NOx concentration increased with temperature of the test solutions. They were released almost at the same temperature between 200 and 300
C. Size distribution of the mist and other particle was measured.
Tashiro, Shinsuke; Abe, Hitoshi
JAEA-Technology 2015-044, 20 Pages, 2016/03
JAEA-Technology-2015-044.pdf:1.26MB
In order to estimate public dose under a criticality accident in fuel solution of a fuel reprocessing plant, release behavior of radioiodine from the fuel solution to atmosphere is very important. In this report, time evolution of 
I concentration in gas phase of TRACY core tank was measured until the concentration in the solution decreased. Furthermore, cumulative release ratio (CRR) and release rate (RR) from the solution to the atmosphere of radioiodine were evaluated by applying previously-reported evaluation model. As a result, for the case of short transient criticality, RR of I became maximum at 1 hour later from the ending and almost constant after 8 hour later. Furthermore, relationship of each elapsed time between total fission number and release rate of I could be derived. On the other hand, for the case of long criticality excursion, such as JCO criticality accident, the CRR and RR of radioiodine increased monotonously with time.
Tashiro, Shinsuke; Amano, Yuki; Yoshida, Kazuo; Yamane, Yuichi; Uchiyama, Gunzo; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi, 14(4), p.227 - 234, 2015/12
The release characteristics of Ru from highly active liquid waste (HALW) have been investigated under the condition of accidental evaporation to dryness by boiling of HALW. Using a laboratory-scale apparatus, non-radioactive simulated HALW (s-HALW) was heated with an external heater to dryness to observe the release characteristics of Ru and gaseous nitrogen oxides. As a result, Ru was significantly released between 120 and 300 C of the s-HALW. The cumulative release ratio of Ru was 0.088. It was also found that the partially released amount of Ru against the temperature of the s-HALW had two peaks with one maximal at about 140 C and maximum at about 240 C. Referring to the results of the release rate of gaseous nitrogen oxides and the volume of condensate, which was a collection of the mixed vapors of steam and nitric acid released from the s-HALW, we discussed the causes of Ru release around these peaks.
Uchiyama, Gunzo; Tashiro, Shinsuke; Amano, Yuki; Abe, Hitoshi; Yamane, Yuichi; Yoshida, Kazuo; Ishikawa, Jun
Proceedings of 21st International Conference & Exhibition; Nuclear Fuel Cycle for a Low-Carbon Future (GLOBAL 2015) (USB Flash Drive), p.1056 - 1063, 2015/09
The experimental study for source term data of radioactive materials has been conducted at a boiling accident of high active liquid waste (HALW) in reprocessing plants. In the study, three kinds of tests have been conducted including a cold small scale test, a cold engineering scale test and a hot small scale test. The following results were obtained: Ruthenium and Technetium were released into the gas phase in the form of both mist and gas under the boiling accident conditions of a simulated HALW. Non-volatile fission products (FPs) such as Nd and Cs were released into the gas phase in the form of mist. The release ratios of non-volatile FPs from a vessel of the simulated HALW were about 10
. The release ratios of actinide nuclides such as Am were almost the same as those of non-volatile FPs.
Amano, Yuki; Watanabe, Koji; Tashiro, Shinsuke; Yamane, Yuichi; Ishikawa, Jun; Yoshida, Kazuo; Uchiyama, Gunzo; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi, 14(2), p.86 - 94, 2015/06
Radioactive materials could be released into air due to the accidental boiling of high active liquid waste (HALW) in reprocessing plants. Volatile radioactive nuclides, such as ruthenium, are released from the tanks into the atmosphere. Nitrogen oxides (NOx) are also released due to the thermal decomposition of metal nitrates in HALW. The released NOx transport volatile ruthenium and cause redox reactions associated with the composition or decomposition of volatile ruthenium. In this study, NOx release data were obtained by heating simulated HALW up to 600C. As a result, the release of NOx from the simulated HALW was observed from 200C to 600C, and the main release of NOx was observed at about 340C. All the lanthanide nitrates were found to decompose in the simulated HALW, and the thermal decomposition temperature of the lanthanide nitrates decreased after the addition of ruthenium dioxide to the mixed lanthanide nitrates solution.
Tashiro, Shinsuke; Uchiyama, Gunzo; Amano, Yuki; Abe, Hitoshi; Yamane, Yuichi; Yoshida, Kazuo
Nuclear Technology, 190(2), p.207 - 213, 2015/05
Times Cited Count：7 Percentile：51.25(Nuclear Science & Technology)The release behavior of radioactive materials from high active liquid waste (HALW) has been investigated under boiling accident conditions. Results of the experiment using a nonradioactive simulated HALW found Ru to be a volatile element under the accident conditions and to be released into the gas phase in the form of both mist and gas. The Ru release rate and the apparent Ru volatilization rate constant were obtained under the boiling conditions of simulated HALW. The other fission product elements such as Cs were found to be nonvolatile and to be released into the gasphase in the form of mist. The mist size distribution near the surface of the simulated HALW in the reactor vessel was found to range from 0.05 to 20 
m with a peak diameter of 
2 m.
Yoshida, Kazuo; Tashiro, Shinsuke; Amano, Yuki; Yamane, Yuichi; Uchiyama, Gunzo; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi, 13(4), p.155 - 166, 2014/12
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents to occur caused by the loss of cooling function at a fuel reprocessing plant. In this case, a large amount of ruthenium (Ru) will be volatilized and transfer to the vapor phase in the tank, and could be released to the environment. Therefore, the quantitative estimation of released Ru is one of the key issues in the assessment of the accident consequence. To resolve this issue, an empirical correlation for Ru transfer rate to vapor phase with the temperature, nitric acid mol fraction and activity of HLLW has been developed based on the data obtained from the accelerated experiments using simulated HLLW. A simulation study with the developed correlation demonstrated that amount of Ru transfer to vapor phase was in a good agreement with the long term experiment using actual HLLW.
Yamagishi, Isao; Nagaishi, Ryuji; Kato, Chiaki; Morita, Keisuke; Terada, Atsuhiko; Kamiji, Yu; Hino, Ryutaro; Sato, Hiroyuki; Nishihara, Kenji; Tsubata, Yasuhiro; et al.
Journal of Nuclear Science and Technology, 51(7-8), p.1044 - 1053, 2014/07
Times Cited Count：19 Percentile：78.38(Nuclear Science & Technology)For safe storage of zeolite wastes generated by treatment of radioactive saline water at the Fukushima Daiichi Nuclear Power Station, properties of the Herschelite adsorbent were studied and its adsorption vessel was evaluated for hydrogen production and corrosion. Hydrogen production depends on its water level and dissolved species because hydrogen is oxidized by radicals in water. It is possible to evaluate hydrogen production rate in Herschelite submerged in seawater or pure water by taking into account of the depth effect of the water. The reference vessel of decay heat 504 W with or without residual pure water was evaluated for the hydrogen concentration by thermal hydraulic analysis using obtained fundamental properties. Maximum hydrogen concentration was below the lower explosive limit (4 %). The steady-state corrosion potential of a stainless steel 316L increased with absorbed dose rate but its increase was repressed by the presence of Herschelite. At 750 Gy/h and 
60C which were values evaluated at the bottom of the vessel of 504 W, the localized corrosion of SUS316L contacted with Herschelite would not immediately occur under 20,000 ppm of Cl
concentration.
Uchiyama, Gunzo; Tashiro, Shinsuke; Amano, Yuki; Abe, Hitoshi; Yamane, Yuichi; Yoshida, Kazuo; Ishikawa, Jun
Proceedings of International Waste Management Symposia 2014 (WM2014) (Internet), 9 Pages, 2014/05
The experimental study for source term data of radioactive materials has been conducted at a boiling accident of high active liquid waste (HALW) in a reprocessing plant. In the small scale cold test using a non-radioactive simulated HALW, the release behavior of FP elements from the simulated HALW were investigated under various boiling accident conditions. In the engineering scale cold test, the release behavior of FP elements at boiling accident conditions was investigated mainly as a spatial function. In the small scale hot test using a radioactive simulated HALW, the release behavior of radioactive materials (FP, alpha nuclides) were obtained under typical boiling accident conditions. In the small scale hot test, the release fractions of Ru and non-volatile FPs obtained were almost the same as those of the small scale cold test.
Amano, Yuki; Tashiro, Shinsuke; Uchiyama, Gunzo; Abe, Hitoshi; Yamane, Yuichi; Yoshida, Kazuo
Proceedings of International Nuclear Fuel Cycle Conference; Nuclear Energy at a Crossroads (GLOBAL 2013) (CD-ROM), p.1411 - 1417, 2013/09
Abe, Hitoshi; Tashiro, Shinsuke; Watanabe, Koji; Uchiyama, Gunzo
JAEA-Research 2012-035, 26 Pages, 2013/01
JAEA-Research-2012-035.pdf:1.94MB
To contribute on confirmation of safety of fuel cycle facilities, an evaluation method for soundness of confinement capability of the facilities under fire accident has been investigated. Organic extraction solvents, zinc stearate, which is added into MOX powder in MOX fuel preparation process, and typical lubricating oil were considered to be examination objects as the representative combustible materials in the facilities. Combustion property data, such as mass loss rate and soot release fraction, of them and clogging property data of HEPA filter with combustion of the organic extraction solvents were measured. As the results, it was found that soot release fraction from burning 30%TBP/70%dodecane was larger than that of the other materials including dodecane and very rapid rise of differential pressure of HEPA filter, which has not been reported, would be induced in the last stage of combustion of 30%TBP/70%dodecane. Furthermore, it was confirmed that zinc stearate, of which combustibility has not been considered, burned continuously in the condition which was heated from outside.
Moriyama, Kiyofumi; Tashiro, Shinsuke; Chiba, Noriaki; Maruyama, Yu; Nakamura, Hideo; Watanabe, Atsushi*
JAEA-Research 2011-016, 125 Pages, 2011/06
JAEA-Research-2011-016.pdf:2.71MB
The volatile iodine production due to radiation chemical effects in the containment vessel of light water reactors (LWRs) during severe accidents was investigated by experiments in small scale and with well controlled conditions. Cesium iodide solutions, 10M, labeled with 
I, at controlled pH by boric acid-sodium hydroxide buffer, were 
-irradiated and swept with a constant gas flow rate. The gaseous iodine released from the solution was collected by species selective filters and quantified separately for I
and organic iodines. The influences of pH, temperature, inorganic and organic impurities, oxygen and hydrogen concentrations in the cover gas on the iodine release behavior were examined. Data including time dependent gaseous iodine release fractions, comparison of the final iodine release fractions in terms of the parameter effects, as well as the initial, boundary and interface conditions necessary for simulating the experiments by computer codes are provided.
