Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Taguchi, Shigeo; Surugaya, Naoki; Sato, Soichi; Kitao, Takahiko; Hina, Tetsuro; Toshiaki, Hiyama,
Dai-25-Kai Kaku Busshitsu Kanri Gakkai Nihon Shibu Nenji Taikai Rombunshu, p.120 - 127, 2004/00
For the determination of Pu in the high active liquid waste (HALW), isotope dilution mass spectrometry (IDMS) has been applied to verification analysis at Tokai Reprocessing Plant. IDMS has been considered as the most reliable analytical technique for accountability measurement of Pu in spent fuel reprocessing plant. However, it takes quite long time for inspector to obtain an analytical result because inspection sample has to be transported to safeguards analytical laboratory for off-site analysis. In order to overcome this disadvantage, a rapid verification analysis of Pu in HALW by conventional spectrophotometer using Nd as an internal standard was proposed to achieve on-site verification measurements. In this method, Nd standard is intended to be provided by International Atomic Energy Agency (IAEA) so that an inspector can independently control it not only as an internal standard but also as an authentication purpose. The validation analysis was carried out by comparing with IDMS. It was found that the values of Pu concentration obtained by proposed method were in good agreement with those obtained by IDMS. Therefore the proposed method can be expected for the application to the verification analysis.
Surugaya, Naoki; Taguchi, Shigeo; Sato, Soichi; Kitao, Takahiko; Hina, Tetsuro; Hiyama, Toshiaki,
Proceedings of 45th INMM Annual Meeting, (112), p.33 - 34, 2004/00
A technique of measuring rapidly and correctly the concentration of Pu contained in the high radioactive liquid waste in a reprocessing plant has been developed. This method is based on spectrophotometry using Nd as an internal standard, and can be expected the application as measurement technology for the safeguards which has been utilizing the conventional method of isotope dilution mass spectrometry. This report describes the measurement principle and the result of the examination which used a real sample.
Surugaya, Naoki; Taguchi, Shigeo; Sato, Soichi; Hina, Tetsuro; Toshiaki, Hiyama,; Kitao, Takahiko
Proceedings of 45th INMM Annual Meeting, CD-ROM, 8p., 8 Pages, 2004/00
A rapid verification technique with conventional spectrophotometer has been developed to achieve on-site safeguards measurements in which neodymium as an internal standard was chosen to determine the plutonium concentration in high radioactive liquid waste.This method will provide the on-site analytical capabilities as it allows rapid and simple analyses at Tokai Reprocessing Plant.