Refine your search:     
Report No.
 - 
Search Results: Records 1-12 displayed on this page of 12
  • 1

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Study on engineering technologies in the Mizunami Underground Research Laboratory (FY 2014); Development of recovery and mitigation technology on excavation damage (Contract research)

Fukaya, Masaaki*; Hata, Koji*; Akiyoshi, Kenji*; Sato, Shin*; Takeda, Nobufumi*; Miura, Norihiko*; Uyama, Masao*; Kaneda, Tsutomu*; Ueda, Tadashi*; Hara, Akira*; et al.

JAEA-Technology 2016-002, 195 Pages, 2016/03

JAEA-Technology-2016-002.pdf:46.3MB
JAEA-Technology-2016-002-appendix(CD-ROM).zip:16.11MB

The researches on examination of the plug applied to the future reflood test was conducted as a part of (5) development of technologies for restoration and/on reduction of the excavation damage relating to the engineering technology in the MIU (2014), specifically focused on (1) plug examination (e.g. functions, structure and material) and the quality control methods and (2) analytical evaluation of rock mass behavior around the plug through the reflood test. As the result, specifications of the plug were determined. These specifications should be able to meet requirements for the safety structure and surrounding rock mass against predicted maximum water pressure, temperature stress and seismic force, and for controlling the groundwater inflow, ensuring the access into the reflood gallery and the penetration performance of measurement cable. Also preliminary knowledge regarding the rock mass behavior around the plug after flooding the reflood gallery by installed plug was obtained.

JAEA Reports

Study on engineering technologies in the Mizunami Underground Research Laboratory (FY 2013); Development of recovery and mitigation technology on excavation damage (Contract research)

Fukaya, Masaaki*; Hata, Koji*; Akiyoshi, Kenji*; Sato, Shin*; Takeda, Yoshinori*; Miura, Norihiko*; Uyama, Masao*; Kaneda, Tsutomu*; Ueda, Tadashi*; Toda, Akiko*; et al.

JAEA-Technology 2014-040, 199 Pages, 2015/03

JAEA-Technology-2014-040.pdf:37.2MB

The researches on engineering technology in the Mizunami Underground Research Laboratory (MIU) project consists of (1) development of design and construction planning technologies, (2) development of construction technology, (3) development of countermeasure technology, (4) development of technology for security, and (5) development of technologies for restoration and/or reduction of the excavation damage. The researches on engineering technology such as verification of the initial design were being conducted by using data measured during construction as a part of the second phase of the MIU plan. Examination about the plug for reflood test in the GL-500m Access/Research Gallery-North as part of the development of technologies for restoration and/or reduction of excavation damage were carried out. Specifically, Literature survey was carried out about the plug, based on the result of literature survey, examination of the design condition, design of the plug and rock stability using numerical simulation, selection of materials for major parts, and grouting for water inflow from between rock and plug, were carried out in this study.

JAEA Reports

Study on engineering technologies in the Mizunami Underground Research Laboratory; FY2012 (Contract research)

Fukaya, Masaaki*; Noda, Masaru*; Hata, Koji*; Takeda, Yoshinori*; Akiyoshi, Kenji*; Ishizeki, Yoshikazu*; Kaneda, Tsutomu*; Sato, Shin*; Shibata, Chihoko*; Ueda, Tadashi*; et al.

JAEA-Technology 2014-019, 495 Pages, 2014/08

JAEA-Technology-2014-019.pdf:82.23MB

The researches on engineering technology in the Mizunami Underground Research Laboratory (MIU) plan consists of (1) research on engineering technology deep underground, and (2) research on engineering technology as a basis of geological disposal. The former research is mainly aimed in this study, which is categorized in (a) development of design and construction planning technologies, (b) development of construction technologies, (c) development of countermeasure technologies, and (d) development of technologies for security. In this study, the researches on engineering technology are being conducted in these four categories by using data measured during construction as a part of the second phase of the MIU plan.

Journal Articles

Compact XFEL and AMO sciences; SACLA and SCSS

Yabashi, Makina*; Tanaka, Hitoshi*; Tanaka, Takashi*; Tomizawa, Hiromitsu*; Togashi, Tadashi*; Nagasono, Mitsuru*; Ishikawa, Tetsuya*; Harries, J.; Hikosaka, Yasumasa*; Hishikawa, Akiyoshi*; et al.

Journal of Physics B; Atomic, Molecular and Optical Physics, 46(16), p.164001_1 - 164001_19, 2013/08

 Times Cited Count:71 Percentile:95.24(Optics)

JAEA Reports

Hydrochemical investigation at the Mizunami Underground Research Laboratory; Compilation of groundwater chemistry in the Mizunami group and Toki granite area (April, 2004 - March, 2008)

Sai, Masataka; Hagiwara, Hiroki; Matsushima, Hiroyuki*; Noda, Masatoshi*; Noda, Masaru*; Ando, Kenichi*; Tanaka, Tatsuya*; Ueda, Tadashi*; Honda, Yuko*; Mizuno, Takashi

JAEA-Data/Code 2010-010, 75 Pages, 2010/09

JAEA-Data-Code-2010-010.pdf:2.5MB

This report compiles data set of the groundwater chemistry obtained at Mizunami Underground Research Laboratory (MIU) between the fiscal year 2004 and the fiscal year 2007. These data includes groundwater chemistry of inflow in the shafts and sampled groundwater in the boreholes, which drilled from sub-stages of MIU and from surface (MSB-2, MSB-4, and MIZ-1). Basic information (e.g. sampling location, sampling date, sampling method, analytical method) are also described in terms of quality control and traceability.

JAEA Reports

Studies on grouting performance in Mizunami Underground Research Laboratory (Contract research)

Kawamura, Hideki*; Ando, Kenichi*; Noda, Masaru*; Tanaka, Tatsuya*; Matsuda, Takeshi*; Fujii, Haruhiko*; Hashimoto, Shuji*; Ueda, Tadashi*; Matsui, Hiroya; Takeuchi, Shinji; et al.

JAEA-Technology 2009-081, 182 Pages, 2010/03

JAEA-Technology-2009-081.pdf:28.89MB

Grouting has practical importance for the reduction of groundwater inflow into excavations during construction of underground facilities. Considering the performance assessment of a radioactive waste repository, the performance of the engineered barrier system could be adversely affected by a high pH plume generated from grout. Therefore, a quantitative estimation of the effectiveness of grouting and grout material is essential. This study has been performed in the Mizunami URL being excavated in crystalline rock as a part of the Project for Grouting Technology Development for the Radioactive Waste Repository funded by METI, Japan. The aims were to evaluate the applicability of existing grouting technology and to develop methodology to determine the distribution of grout and change in hydraulic properties of the grouted rock volume. The target rock is the volume of rock around a planned refuge niche where the pre-excavation grouting was performed at 200-m depth from ground surface. After excavation of the refuge niche, ten boreholes were drilled and different kinds of investigations were carried out during and after drilling. The results were integrated and groundwater flow analysis of pre and post excavation grouting conditions were carried out to estimate quantitatively the effect of pre-excavation grouting. The results suggest that current pre-excavation grouting technology is effective for reduction of groundwater inflow into excavations and that hydraulic conductivity of the surrounding rock can be reduced by more than one order of magnitude.

Journal Articles

Controlling the phase matching conditions of optical parametric chirped-pulse amplification using partially deuterated KDP

Ogawa, Kanade; Sueda, Keiichi*; Akahane, Yutaka; Aoyama, Makoto; Tsuji, Koichi; Fujioka, Kana*; Kanabe, Tadashi*; Yamakawa, Koichi; Miyanaga, Noriaki*

Optics Express (Internet), 17(10), p.7744 - 7749, 2009/05

 Times Cited Count:13 Percentile:54.3(Optics)

Using a partially deuterated KDP crystal for an optical parametric amplifier, we demonstrated ultrabroadband optical parametric chirped-pulse amplification of more than 250 nm bandwidth at a center wavelength of 1050 nm. We numerically show how to control the broadband phase matching conditions at different wavelengths to match center wavelengths of suitable broadband seed sources by adjusting the deuteration level in partially deuterated KDP.

Journal Articles

Analysis of internal motions of interleukin-13 variant associated with severe bronchial asthma using $$^{15}$$N NMR relaxation measurements

Yoshida, Yuichiro*; Okuri, Takatoshi*; Takeda, Chika*; Kuroki, Ryota; Izuhara, Kenji*; Imoto, Taiji*; Ueda, Tadashi*

Biochemical and Biophysical Research Communications, 358(1), p.292 - 297, 2007/06

 Times Cited Count:4 Percentile:9.94(Biochemistry & Molecular Biology)

The single nucleotide polymorphism interleukin-13 (IL-13) R110Q is associated with severe bronchial asthma because its lower affinity leads to the augmentation of local IL-13 concentration, resulting in an increase in the signal transduction via IL-13R. Since the mutation site does not directly bind to IL-13 R$$alpha$$2, we carried out NMR relaxation analyses of the wild-type IL-13 and IL-13 R110Q in order to examine whether the R110Q mutation affects the internal motions in IL-13 molecules. The results showed that the internal motion in the micro- to millisecond time scale on helix D, which is suggested to be important for the interaction between IL-13 and IL-13R$$alpha$$2, is increased in IL-13-R110Q compared with that in the wild-type IL-13. It therefore appears that the difference in the internal motions on helix D between the wild-type IL-13 and IL-13-R110Q may be involved in their affinity differences with IL-13R$$alpha$$2.

JAEA Reports

The ultrasonic wave thermometer sodium test, 1; A summary of test results of the externally mounted ultrasonic transducer for pipe-flow

Hayashida, Hitoshi; Kokaki, Nobuhisa; Ueda, Masashi; Isozaki, Tadashi; Ara, Kuniaki

JNC TN9400 98-001, 54 Pages, 1998/10

JNC-TN9400-98-001.pdf:1.39MB

Based on the temperature dependence of the velocity of sound in sodium, an ultrasonic thermometer that measures the temperature of sodium non-intrusively is being developed. The principle of the device is based on the propagation time of an acoustic pulse wave, and the back calculation of the sodium temperature. As the part of the development a test was actually carried out in sodium pipe-flow in order to evaluate various aspects of realizing the ultrasonic wave thermometer. The results and conclusions to date are as follows: (1)Within the present test range, the ultrasonic wave thermometer appears relatively insensitive to flow velocity of sodium, pressure of the cover gas and the impurity concentration in sodium. The calculated error of the measured thermometry was in the experiment about 1 $$^{circ}$$C, a smaller value than the expected 2.5$$^{circ}$$C of the system. (2)The ultrasonic thermometer has only been used wherein the thermal expansion coefficient was known and with 200 $$^{circ}$$C as the reference temperatures. For the entire temperature range tested the difference between this approach and a two-point calibration over a temperature range is only expected to be about 1 $$^{circ}$$C. (3)By using the mean value of multiple ultrasonic wave transmit and receive measurements, a value whereby the ultrasonic propagation time was stabilized is obtained. (4)As acoustic coupling material between the ultrasonic transducer and piping, a copper plate was found to be more suitable than a specialized acoustic bonding material. A weight equivalent, area distributed force of 2.0kg/mm$$^{2}$$ was used to press the test copper plate to the pipe. A slightly smaller force appears more than sufficient as well. (5)We found that mounting the ultrasonic transducer to the exterior surface of the pipe by a clamping method is sufficient such that no welding is needed. (6)The in-sodium test period was about 2 months. No noticeable change in measurement characteristics of the ...

Oral presentation

Controlling the phase matching conditions of optical parametric chirped pulse amplification using partially deuterated KDP

Ogawa, Kanade; Sueda, Keiichi*; Akahane, Yutaka; Aoyama, Makoto; Tsuji, Koichi; Fujioka, Kana*; Kanabe, Tadashi*; Yamakawa, Koichi; Miyanaga, Noriaki*

no journal, , 

Using a partially deuterated KDP crystal for an optical parametric amplifier, we demonstrated ultrabroadband optical parametric chirped-pulse amplification of more than 250 nm bandwidth at a center wavelength of 1050 nm. We numerically show how to control the broadband phase matching conditions at different wavelengths to match center wavelengths of suitable broadband seed sources by adjusting the deuteration level in partially deuterated KDP.

Oral presentation

Optimization for OPCPA phase matching condition using partially deuterated KDP

Ogawa, Kanade; Sueda, Keiichi*; Akahane, Yutaka; Aoyama, Makoto; Tsuji, Koichi; Fujioka, Kana*; Kanabe, Tadashi*; Miyanaga, Noriaki*; Yamakawa, Koichi

no journal, , 

Using a partially deuterated KDP crystal for an optical parametric amplifier, we demonstrated ultrabroadband optical parametric chirped-pulse amplification of more than 250 nm bandwidth at a center wavelength of 1050 nm. We numerically show how to control the broadband phase matching conditions at different wavelengths to match center wavelengths of suitable broadband seed sources by adjusting the deuteration level in partially deuterated KDP.

Oral presentation

Optical parametric chirped pulse amplification using partially deuterated KDP

Ogawa, Kanade; Sueda, Keiichi*; Akahane, Yutaka; Aoyama, Makoto; Tsuji, Koichi; Fujioka, Kana*; Kanabe, Tadashi*; Miyanaga, Noriaki*; Yamakawa, Koichi

no journal, , 

Using a partially deuterated KDP crystal for an optical parametric amplifier, we demonstrated ultrabroadband optical parametric chirped-pulse amplification of more than 250 nm bandwidth at a center wavelength of 1050 nm. We numerically show how to control the broadband phase matching conditions at different wavelengths to match center wavelengths of suitable broadband seed sources by adjusting the deuteration level in partially deuterated KDP.

12 (Records 1-12 displayed on this page)
  • 1