Utilization of gamma ray irradiation at the WASTEF Facility

Sano, Naruto; Yamashita, Naoki; Watanabe, Masaya; Tsukada, Manabu*; Hoshino, Kazutoyo*; Hirai, Koki; Ikegami, Yuta*; Tashiro, Shinsuke; Yoshida, Ryoichiro; Hatakeyama, Yuichi; et al.

JAEA-Technology 2023-029, 36 Pages, 2024/03

JAEA-Technology-2023-029.pdf:2.47MB

At the Waste Safety Testing Facility (WASTEF), the gamma ray irradiation device "Gamma Cell 220" was relocated from the 4th research building of the Nuclear Science Research Institute in FY2019, and the use of gamma ray irradiation has begun. Initially, Fuel Cycle Safety Research Group, Fuel Cycle Safety Research Division, Nuclear Safety Research Center, Sector of Nuclear Safety Research and Emergency Preparedness, the owner of this device, conducted the tests as the main user, but since 2022, other users, including those outside the organization, have started using it. The gamma ray irradiation device "Gamma Cell 220" is manufactured by Nordion International Inc. in Canada. Since it was purchased in 1989, the built-in 60Co radiation source has been updated once, and safety research related to nuclear fuel cycles, etc. It is still used for this purpose to this day. This report summarizes the equipment overview of the gamma ray irradiation device "Gamma Cell 220", its permits and licenses at WASTEF, usage status, maintenance and inspection, and future prospects.

Free-surface flow simulations with floating objects using lattice Boltzmann method

Watanabe, Seiya*; Kawahara, Jun*; Aoki, Takayuki*; Sugihara, Kenta; Takase, Shinsuke*; Moriguchi, Shuji*; Hashimoto, Hirotada*

Engineering Applications of Computational Fluid Mechanics, 17(1), p.2211143_1 - 2211143_23, 2023/00

https://doi.org/10.1080/19942060.2023.2211143

In tsunami inundations or slope disasters of heavy rain, a lot of floating debris or driftwood logs are included in the flows. The damage to structures from solid body impacts is more severe than the damage from the water pressure. In order to study free-surface flows that include floating debris, developing a high-accurate simulation code of free-surface flows with high performance for large-scale computations is desired. We propose the single-phase free-surface flow model based on the cumulant lattice Boltzmann method coupled with a particle-based rigid body simulation. The discrete element method calculates the contact interaction between solids. An octree-based AMR (Adaptive Mesh Refinement) method is introduced to improve computational accuracy and time-to-solution. High-resolution grids are assigned near the free surfaces and solid boundaries. We conducted two kinds of tsunami flow experiments in the 15 and 70 m water tanks at Hachinohe Institute of Technology and Kobe University to validate the accuracy of the proposed model. The simulation results have shown good agreement with the experiments for the drifting speed, the number of trapped wood pieces, and the stacked angles.

Clogging properties of HEPA filter induced by loading of soot from burned glove-box panel materials

Tashiro, Shinsuke; Ono, Takuya; Amano, Yuki; Yoshida, Ryoichiro; Watanabe, Koji*; Abe, Hitoshi

Nuclear Technology, 208(10), p.1553 - 1561, 2022/10

https://doi.org/10.1080/00295450.2022.2045179

To contribute to the confinement safety evaluation of the radioactive materials in the Glove box (GB) fire accident, combustion tests with the Polymethyl methacrylate (PMMA) and the Polycarbonate (PC) as typical panel materials for the GB have been conducted with a relatively large scale apparatus. As the important data for evaluating confinement safety, the release ratio and the particle size distribution of the soot generated from the burned materials were obtained. Furthermore, the rise of the differential pressure (P) of the high efficiency particle air (HEPA) filter by the soot loading was also investigated. As results, the release ratio of the soot from the PC was about seven times as large as the PMMA. In addition, it was found that the behavior of the rise of the P with soot loading could be represented uniformly regardless of kinds of combustion materials by considering effect of the loading volume of the soot particle in the relatively low loading region.

PSTEP: Project for solar-terrestrial environment prediction

Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.

Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12

https://doi.org/10.1186/s40623-021-01486-1

The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

Study of the Li() reaction for the development of accelerator-based neutron sources

Watanabe, Yukinobu*; Sadamatsu, Hiroki*; Araki, Shohei*; Nakano, Keita*; Kawase, Shoichiro*; Kin, Tadahiro*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; et al.

EPJ Web of Conferences, 239, p.20012_1 - 20012_4, 2020/09

https://doi.org/10.1051/epjconf/202023920012

Accelerator-based neutron sources induced by deuteron beams are attractive for study of nuclear transmutation of radioactive waste as well as radiation damage for fusion reactor materials. In the present work, we have carried out a Double Differential cross section (DDX) measurement for Li at 200 MeV in the Research Center for Nuclear Physics (RCNP), Osaka University. A deuteron beam accelerated to 200 MeV was transported to the neutron experimental hall and focused on a thin Li target. Emitted neutrons from the target were detected by two different-size EJ301 liquid organic scintillators located at two distances of 7 m and 20 m, respectively. The neutron DDXs were measured at six angles from 0 to 25). The neutron detection efficiencies of the detectors were calculated by SCINFUL-QMD code. We will present the results of the present DDX measurement and compare them with theoretical model calculations with DEURACS and PHITS.

Spallation and fragmentation cross sections for 168 MeV/nucleon Xe ions on proton, deuteron, and carbon targets

Sun, X. H.*; Wang, H.*; Otsu, Hideaki*; Sakurai, Hiroyoshi*; Ahn, D. S.*; Aikawa, Masayuki*; Fukuda, Naoki*; Isobe, Tadaaki*; Kawakami, Shunsuke*; Koyama, Shumpei*; et al.

Physical Review C, 101(6), p.064623_1 - 064623_12, 2020/06

https://doi.org/10.1103/PhysRevC.101.064623

The spallation and fragmentation reactions of Xe induced by proton, deuteron and carbon at 168 MeV/nucleon were studied at RIKEN Radioactive Isotope Beam Factory via the inverse kinematics technique. The cross sections of the lighter products are larger in the carbon-induced reactions due to the higher total kinetic energy of carbon. The energy dependence was investigated by comparing the newly obtained data with previous results obtained at higher reaction energies. The experimental data were compared with the results of SPACS, EPAX, PHITS and DEURACS calculations. These data serve as benchmarks for the model calculations.

Consistent description of light composite particle emission in deuteron-induced reactions

Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*

Physical Review C, 100(4), p.044603_1 - 044603_8, 2019/10

https://doi.org/10.1103/PhysRevC.100.044603

The weakly-bound nature of the deuteron brings the complexity of deuteron-induced reactions compared to nucleon-induced ones, and is expected to affect various physical quantities observed in deuteron-induced reactions. Aiming to deep understanding and accurate prediction for the emission of light composite particle (LCP) in deuteron-induced reactions, we revise the computational system dedicated to deuteron-induced reactions, called DEURACS. The model by Iwamoto and Harada describing pre-equilibrium cluster emission which was successfully applied to LCP emission innucleon-induced reactions is integrated into the framework of DEURACS, in which the breakup processes of incident deuteron are explicitly taken into account. The phenomenological model by Kalbach is also adopted to estimate the contribution from the direct pickup process. Using the revised DEURACS, we analyze the , , and reactions in the target mass range . Regardless of the targets, the calculation results successfully reproduced the experimental data for each reaction, simultaneously. These results demonstrates that the LCP emission from the pre-equilibrium and compound nucleus processes in deuteron-induced reactions,which occupies a large part of the total LCP emission,can be described by the same theoretical models as used in nucleon-induced reactions when the breakup processes of incident deuteron are properly considered.

Role of breakup processes in deuteron-induced spallation reactions at 100-200 MeV/nucleon

Nakayama, Shinsuke; Furutachi, Naoya; Iwamoto, Osamu; Watanabe, Yukinobu*

Physical Review C, 98(4), p.044606_1 - 044606_8, 2018/10

https://doi.org/10.1103/PhysRevC.98.044606

Use of deuteron-induced spallation reactions at intermediate energies has recently been proposed for transmutation of several long-lived fission products (LLFPs). In the design study of a transmutation system using a deuteron primary beam, accurate cross section data of deuteron-induced reactions on the LLFPs are indispensable. In the present study, production cross sections of residual nuclei in the deuteron-induced reactions on Zr and Pd at MeV/nucleon are analyzed using DEURACS, in which the breakup processes are explicitly taken into account. The calculated values reproduced the experimental data quantitatively well. From a component-by-component analysis, it was found that the components of nucleon absorption make the significant contributions to residual nuclei production. This result strongly indicates that consideration of the breakup processes is essentially important to predict production of residual nuclei in deuteron-induced reactions.

Theoretical model analysis of composite-particle emission from deuteron-induced reactions

Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*

JAEA-Conf 2017-001, p.91 - 96, 2018/01

https://doi.org/10.11484/jaea-conf-2017-001

Toward evaluation of deuteron nuclear data, we have been developing a code system dedicated for the deuteron-induced reactions, called DEURACS. In the present work, we make an improvement in DEURACS and apply it to composite-particle emission from deuteron-induced reactions. The calculation using DEURACS reproduces the experimental double-differential cross sections of , , , and reactions on Al and Ni at incident energy of 80 MeV quantitatively well. From the results of the analyses, it is shown that the treatment of inelastic scattering and pick-up reaction processes is important in the calculation of deuteron-induced composite-particle emission.