Development on laser cutting technique to suppress spatter particles aiming at disposal of radio-active waste

Naoe, Takashi; Teshigawara, Makoto; Futakawa, Masatoshi; Mizutani, Haruki; Muramatsu, Toshiharu; Yamada, Tomonori; Ushitsuka, Yuji*; Tanaka, Nobuatsu*; Yamasaki, Kazuhiko*

Proceedings of 8th International Congress on Laser Advanced Materials Processing (LAMP 2019) (Internet), 5 Pages, 2019/05

Laser cutting is one of the options in the disposal of radio-active waste, such as spallation neutron target vessel in J-PARC, etc. Due to unique characteristic of laser, such as non-contact system, it is more easily to provide remote-controlled system in comparison with conventional one, such as mechanical cutting machine, etc. However, a demerit of laser cutting is the sputter and fume caused by laser cutting, resulting in contamination with radio-active materials its surroundings. Recently it was developed that the spatter suppression technique by controlling laser beam profile in laser welding process. In order to apply this suppression technique to laser cutting, first of all, we attempted to observe the phenomenon at melting area during laser cutting using a high-speed video camera in order to make the physical model. The result showed that the appearance of fume and sputter were independently confirmed in the time evolution.

Temperature stability of PIN-PMN-PT ternary ceramics during pyroelectric power generation

Moro, Takuya*; Kim, J.*; Yamanaka, Satoru*; Murayama, Ichiro*; Kato, Takanori*; Nakayama, Tadachika*; Takeda, Masatoshi*; Yamada, Noboru*; Nishihata, Yasuo; Fukuda, Tatsuo; et al.

Journal of Alloys and Compounds, 768, p.22 - 27, 2018/11

https://doi.org/10.1016/j.jallcom.2018.07.182

Detection of fatigue damage in stainless steel by EBSD analysis; Applicability of EBSD pattern quality

Kuroda, Masatoshi*; Kamaya, Masayuki*; Yamada, Teruaki*; Akita, Koichi

Nihon Kikai Gakkai Rombunshu (Internet), 83(852), p.17-00072_1 - 17-00072_7, 2017/07

https://doi.org/10.1299/transjsme.17-00072

In order to assess the fatigue damage of austenitic stainless steels by electron backscatter diffraction (EBSD) method more simply and easily, it should be more preferable to use a commercially available general-purpose EBSD analysis software rather than to employ an in-house developed EBSD analysis programme. In the present study, EBSD measurement was performed for Type 316 austenitic stainless steels subjected to cyclic loading, and the applicability of the EBSD parameter relevant to the pattern quality, which could be obtained by the commercial software, to the fatigue damage assessment was discussed by comparing the other EBSD parameter of the averaged local misorientation (Mave), which could be calculated by the in-house developed programme. As a result, the EBSD parameter relevant to the pattern quality, which signified the full width at half maximum (FWHM) of the histogram distribution of the image quality (IQ), was saturated at the beginning stage of the fatigue cycles, while Mave was increased monotonically with the cycles. This suggested that the FWHM of IQ could be useful to detect the initial stage of the fatigue damage, while Mave was suitable for the quantitative evaluation of the fatigue damage. XRD measurement was also carried out for the same samples employed in the EBSD measurement, and the XRD data was compared with the EBSD data to discuss the crystallographic mechanism of the change in the FWHM of IQ. As a result, it was found that the FWHM of the (111) XRD peak correlated well with the FWHM of IQ. Because the (111) plane in fcc metal such as austenitic stainless steel was most preferable for slip system, this implied that the change in the distribution of the pattern quality generated by the fatigue loading could be due to the slip deformation.

Neutron scattering study of spin fluctuations in LaSrCuO by four-dimensional mapping of neutron cross-sections using the 4SEASONS chopper spectrometer

Wakimoto, Shuichi; Ikeuchi, Kazuhiko*; Arai, Masatoshi; Fujita, Masaki*; Kajimoto, Ryoichi; Kawamura, Sho*; Matsuura, Masato*; Nakajima, Kenji; Yamada, Kazuyoshi*

JPS Conference Proceedings (Internet), 8, p.034013_1 - 034013_6, 2015/09

https://doi.org/10.7566/JPSCP.8.034013

Design and performance of high-pressure PLANET beamline at pulsed neutron source at J-PARC

Hattori, Takanori; Sano, Asami; Arima, Hiroshi*; Komatsu, Kazuki*; Yamada, Akihiro*; Inamura, Yasuhiro; Nakatani, Takeshi; Seto, Yusuke*; Nagai, Takaya*; Utsumi, Wataru; et al.

Nuclear Instruments and Methods in Physics Research A, 780, p.55 - 67, 2015/04

https://doi.org/10.1016/j.nima.2015.01.059

PLANET is a time-of-flight (ToF) neutron beamline dedicated to high-pressure and high-temperature experiments. The large six-axis multi-anvil high-pressure press designed for ToF neutron diffraction experiments enables routine data collection at high pressures and high temperatures up to 10 GPa and 2000 K, respectively. To obtain clean data, the beamline is equipped with the incident slits and receiving collimators to eliminate parasitic scattering from the high-pressure cell assembly. The high performance of the diffractometer for the resolution ( / 0.6%) and the accessible -spacing range (0.2-8.4 ) together with low-parasitic scattering characteristics enables precise structure determination of crystals and liquids under high pressure and temperature conditions.

Evaluation of fracture toughness of fine-grained isotropic graphites for HTGR

Yamada, Teruaki*; Matsushima, Yuki*; Kuroda, Masatoshi*; Sumita, Junya; Shibata, Taiju; Fujita, Ichiro*; Sawa, Kazuhiro

Nuclear Engineering and Design, 271, p.323 - 326, 2014/05

https://doi.org/10.1016/j.nucengdes.2013.11.055

In order to investigate the effects of the experimental methodology and the notch angle on the fracture toughness of the fine-grained isotropic nuclear graphites IG-110 and IG-430, the three-point-bending test, which has been recently proposed as the methodology to evaluate the fracture toughness of graphite for high temperature gas-cooled reactors (HTGRs), was performed using two types of the specimens with different notch angles. The results obtained in this study could be summarized as follows: (1) The values of the fracture toughness of IG-110 and IG-430 measured in this study were 0.890 MPa m and 1.031 MPa m, respectively. It was also found that the value of the fracture toughness of IG-110 was nearly equal to or smaller than the values obtained by the other method reported previously. (2) The values of the fracture toughness of the fine-grained isotropic graphites were not affected between the notch angles introduced by the incisive razor blade. (3) The ratio of the tensile strengths of IG-110 and IG-430 was estimated from Griffith Theory using the experimental data obtained in this study. The estimated strength ratio was in good agreement with the strength ratio obtained from the supplier's data.

Evaluation of fracture toughness of fine-grained isotropic graphites for HTGR

Yamada, Teruaki*; Matsushima, Yuki*; Kuroda, Masatoshi*; Sumita, Junya; Shibata, Taiju; Fujita, Ichiro*; Sawa, Kazuhiro

Proceedings of 6th International Topical Meeting on High Temperature Reactor Technology (HTR 2012) (USB Flash Drive), 6 Pages, 2012/10

In order to investigate the effects of the experimental methodology and the notch angle on the fracture toughness of the fine-grained isotropic nuclear graphites IG-110 and IG-430, the three-point-bending test, which has been recently proposed as the methodology to evaluate the fracture toughness of graphite for high temperature gas-cooled reactors (HTGRs), was performed using two types of the specimens with different notch angles. The results obtained in this study could be summarized as follows: (1) The values of the fracture toughness of IG-110 and IG-430 measured in this study were 0.890 (MPam) and 1.031 (MPam), respectively. It was also found that the value of the fracture toughness of IG-110 was nearly equal to or smaller than the values obtained by the other method reported previously. (2) The values of the fracture toughness of the fine-grained isotropic graphites were not affected between the notch angles introduced by the incisive razor blade. (3) The ratio of the tensile strengths of IG-110 and IG-430 was estimated from Griffith Theory using the experimental data obtained in this study. The estimated strength ratio was in good agreement with the strength ratio obtained from the supplier's data.

Developments of in-situ SEOP polarized He neutron spin filter in Japan

Kira, Hiroshi; Sakaguchi, Yoshifumi; Oku, Takayuki; Suzuki, Junichi; Nakamura, Mitsutaka; Arai, Masatoshi; Endo, Yasuo; Chang, L.-J.; Kakurai, Kazuhisa; Arimoto, Yasushi*; et al.

Journal of Physics; Conference Series, 294, p.012014_1 - 012014_5, 2011/06

https://doi.org/10.1088/1742-6596/294/1/012014

Structure of glasses for He neutron spin filter cells

Sakaguchi, Yoshifumi; Kira, Hiroshi; Oku, Takayuki; Shinohara, Takenao; Suzuki, Junichi; Sakai, Kenji; Nakamura, Mitsutaka; Suzuya, Kentaro; Aizawa, Kazuya; Arai, Masatoshi; et al.

Journal of Physics; Conference Series, 294(1), p.012004_1 - 012004_7, 2011/06

https://doi.org/10.1088/1742-6596/294/1/012004

Research on glass cells for He neutron spin filters

Sakaguchi, Yoshifumi; Kira, Hiroshi; Oku, Takayuki; Shinohara, Takenao; Suzuki, Junichi; Sakai, Kenji; Nakamura, Mitsutaka; Suzuya, Kentaro; Aizawa, Kazuya; Arai, Masatoshi; et al.

Physica B; Condensed Matter, 406(12), p.2443 - 2447, 2011/06

https://doi.org/10.1016/j.physb.2010.12.020