Simultaneous determination of zircon crystallisation age and temperature; Common thermal evolution of mafic magmatic enclaves and host granites in the Kurobegawa granite, central Japan

Yuguchi, Takashi*; Yamazaki, Hayato*; Ishibashi, Kozue*; Sakata, Shuhei*; Yokoyama, Tatsunori; Suzuki, Satoshi*; Ogita, Yasuhiro; Sando, Kazusa*; Imura, Takumi*; Ono, Takeshi*

Journal of Asian Earth Sciences, 226, p.105075_1 - 105075_9, 2022/04

https://doi.org/10.1016/j.jseaes.2021.105075

Simultaneous determination of the U-Pb age of zircon and concentration of titanium in a single analysis spot, using inductively coupled plasma mass spectrometry with laser ablation sample introduction, produces paired age and temperature data of zircon crystallisation, potentially revealing time-temperature () histories for evolved magma. The Kurobegawa granite, central Japan, contains abundant mafic magmatic enclaves (MMEs). We applied this method to evaluate MMEs and their host (enclosing) granites. Cooling behaviour common to both MMEs and host rocks was found between 1.5 and 0.5 Ma. Rapid cooling from the zircon crystallisation temperature to the closure temperature of biotite K-Ar system was within 1 million year. Combining the obtained paths of MMEs and host rocks with petrological information can provide insights into magma chamber processes. This suggests that MME flotation, migration, and spread through the magma chamber ceased at 1.5-0.5 Ma, indicating the emplacement age of the Kurobegawa granitic pluton, as no large-scale reheating episodes have occurred since then.

Fine-structure analysis of perhydropolysilazane-derived nano layers in deep-buried condition using polarized neutron reflectometry

Akutsu, Kazuhiro*; Kira, Hiroshi*; Miyata, Noboru*; Hanashima, Takayasu*; Miyazaki, Tsukasa*; Kasai, Satoshi*; Yamazaki, Dai; Soyama, Kazuhiko; Aoki, Hiroyuki

Polymers (Internet), 12(10), p.2180_1 - 2180_10, 2020/10

https://doi.org/10.3390/polym12102180

Three-dimensional cellular premixed flames generated by hydrodynamic and diffusive-thermal instabilities (Effects of unburned-gas temperature and heat loss)

Kadowaki, Satoshi; Nogami, Masato*; Thwe Thwe, A.; Katsumi, Toshiyuki*; Yamazaki, Wataru*; Kobayashi, Hideaki*

Nihon Kikai Gakkai Rombunshu (Internet), 85(879), p.19-00274_1 - 19-00274_13, 2019/11

https://doi.org/10.1299/transjsme.19-00274

We dealt with three-dimensional cellular premixed flames generated by hydrodynamic and diffusive-thermal instabilities to elucidate the effects of unburned-gas temperature and heat loss by adopting the three-dimensional compressible Navier-Stokes equation. As the unburned-gas temperature became lower and the heat loss became larger, the growth rate decreased and the unstable range narrowed. With a decrease of unburned-gas temperature, the normalized growth rate increased and the normalized unstable range widened, which was because the temperature ratio of burned and unburned gases became larger. The obtained hexagonal cellular fronts were qualitatively consistent with the experimental results. As the heat loss became larger, the burning velocity of a cellular flame normalized by that of a planar flame increased. This was because diffusive-thermal effects became stronger owing to the increase of apparent Zeldovich number caused by the decrease of flame temperature.

Advanced analysis technology for new material and product development

Sasaki, Hirokazu*; Nishikubo, Hideo*; Nishida, Shinsuke*; Yamazaki, Satoshi*; Nakasaki, Ryusuke*; Isomatsu, Takemi*; Minato, Ryuichiro*; Kinugawa, Kohei*; Imamura, Akihiro*; Otomo, Shinya*; et al.

Furukawa Denko Jiho, (138), p.2 - 10, 2019/02

https://www.furukawa.co.jp/rd/review/fj138/fj138_02.pdf

no abstracts in English

Interim report of the JHPS expert committee on radiation protection of the lens of the eye, 2; The Dosimetry method for the lens of the eye of workers in Japan

Akahane, Keiichi*; Iimoto, Takeshi*; Ichiji, Takeshi*; Iwai, Satoshi*; Oguchi, Hiroyuki*; Ono, Kazuko*; Kawaura, Chiyo*; Tatsuzaki, Hideo*; Tsujimura, Norio; Hamada, Nobuyuki*; et al.

Hoken Butsuri, 49(3), p.153 - 156, 2014/09

https://doi.org/10.5453/jhps.49.153

A brief review is given of the history and methodology of external dosimetry for the lens of the eye. Under the 1989 revision to domestic radiological protection regulations, the concept on the effective dose equivalent and the dose limit to the lens of the eye (150 mSv/y) both introduced in ICRP 1977 recommendations has changed nationwide the external monitoring methodology in non-uniform exposure situations to the trunk of a radiological worker. In such situations, often created by the presence of a protective apron, the worker is required to use at least two personal dosemeters, one worn on the trunk under the apron and the other, typically, at the collar over the apron. The latter dosemeter serves the dual purpose of providing the dose profile across the trunk for improved effective dose equivalent assessment and of estimating the dose to lens of the eye. The greater or appropriate value between (10) and (0.07), given by the dosemeter, is generally used as a surrogate of (3).

Conceptual design of multipurpose compact research reactor; Annual report FY2010 (Joint research)

Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Watahiki, Shunsuke; Nagata, Hiroshi; Hanakawa, Hiroki; Naka, Michihiro; Kawamata, Kazuo; Yamaura, Takayuki; Ide, Hiroshi; et al.

JAEA-Technology 2011-031, 123 Pages, 2012/01

JAEA-Technology-2011-031.pdf:16.08MB

The number of research reactors in the world is decreasing because of their aging. However, the planning to introduce the nuclear power plants is increasing in Asian countries. In these Asian countries, the key issue is the human resource development for operation and management of nuclear power plants after constructed them, and also the necessity of research reactor, which is used for lifetime extension of LWRs, progress of the science and technology, expansion of industry use, human resources training and so on, is increasing. From above backgrounds, the Neutron Irradiation and Testing Reactor Center began to discuss basic concept of a multipurpose low-power research reactor for education and training, etc. This design study is expected to contribute not only to design tool improvement and human resources development in the Neutron Irradiation and Testing Reactor Center but also to maintain and upgrade the technology on research reactors in nuclear power-related companies. This report treats the activities of the working group from July 2010 to June 2011 on the multipurpose low-power research reactor in the Neutron Irradiation and Testing Reactor Center and nuclear power-related companies.

Research on glass cells for He neutron spin filters

Sakaguchi, Yoshifumi; Kira, Hiroshi; Oku, Takayuki; Shinohara, Takenao; Suzuki, Junichi; Sakai, Kenji; Nakamura, Mitsutaka; Suzuya, Kentaro; Aizawa, Kazuya; Arai, Masatoshi; et al.

Physica B; Condensed Matter, 406(12), p.2443 - 2447, 2011/06

https://doi.org/10.1016/j.physb.2010.12.020

Characterization of glasses for He neutron spin filter cells

Sakaguchi, Yoshifumi; Kira, Hiroshi; Oku, Takayuki; Shinohara, Takenao; Suzuki, Junichi; Sakai, Kenji; Nakamura, Mitsutaka; Suzuya, Kentaro; Arai, Masatoshi; Takeda, Masayasu; et al.

Nuclear Instruments and Methods in Physics Research A, 634(1, Suppl.), p.S122 - S125, 2011/04

29th report of ITPA topical group meeting

Isayama, Akihiko; Sakakibara, Satoru*; Furukawa, Masaru*; Matsunaga, Go; Yamazaki, Kozo*; Watanabe, Kiyomasa*; Idomura, Yasuhiro; Sakamoto, Yoshiteru; Tanaka, Kenji*; Tamura, Naoki*; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 86(6), p.374 - 377, 2010/06

http://ci.nii.ac.jp/naid/40017204455

no abstracts in English

Influence of heat treatment on long term creep properties of 9Cr-W-Mo-V-Nb steel

Obara, Satoshi; Wakai, Takashi; Asayama, Tai; Yamada, Yoshiyuki*; Nakazawa, Takanori*; Yamazaki, Masayoshi*; Hongo, Hiromichi*

Tetsu To Hagane, 96(4), p.172 - 181, 2010/04

https://doi.org/10.2355/tetsutohagane.96.172

This paper describes the effect of heat treatment on mechanical properties of 9Cr-W-Mo-V-Nb steel as a part of development of high Cr steel for fast breeder reactor (FBR). The effects of normalizing temperature and tempering temperature and time on creep properties were investigated from the viewpoint of microstructures. Creep strength increased with increase in normalizing temperature from 950C to 1200C. The microstructural factors that improve creep strength are increased amount of MX which precipitated during tempering process and increased dislocation density. In addition, coarsening of prior austenite grain size also contribute to increasing creep strength. Although creep rupture time of 780C-1h tempering specimen was greater than that of 700C-1h and 750C-1h tempering specimen in a long-term region exceeding 20000h at 650C, creep ductility and reduction of area of the former remarkably degraded compared to those of the latter.