Neutron-production double-differential cross sections of Pb and Bi in proton-induced reactions near 100 MeV

Iwamoto, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Yashima, Hiroshi*; Nishio, Katsuhisa; Sugihara, Kenta*; elik, Y.*; et al.

Nuclear Instruments and Methods in Physics Research B, 544, p.165107_1 - 165107_15, 2023/11

https://doi.org/10.1016/j.nimb.2023.165107

The lack of double-differential cross-section (DDX) data for neutron production below the incident proton energy of 200 MeV hinders the validation of spallation models in technical applications, such as research and development of accelerator-driven systems (ADSs). The present study aims to obtain experimental DDX data for ADS spallation target materials in this energy region and identify issues related to the spallation models by comparing them with the analytical predictions. The DDXs for the () reactions of Pb and Bi in the 100-MeV region were measured over an angular range of 30 to 150 using the time-of-flight method. The measurements were conducted at Kyoto University utilizing the FFAG accelerator. The DDXs obtained were compared with calculation results from Monte Carlo-based spallation models and the evaluated nuclear data library, JENDL-5. Comparison between the measured DDX and analytical values based on the spallation models and evaluated nuclear data library indicated that, in general, the CEM03.03 model demonstrated the closest match to the experimental values. Additionally, the comparison highlighted several issues that need to be addressed in order to improve the reproducibility of the proton-induced neutron-production DDX in the 100 MeV region by these spallation models and evaluated nuclear data library.

Neutron production in the interaction of 200-MeV deuterons with Li, Be, C, Al, Cu, Nb, In, Ta, and Au

Watanabe, Yukinobu*; Sadamatsu, Hiroki*; Araki, Shohei; Nakano, Keita; Kawase, Shoichiro*; Kin, Tadahiro*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; et al.

EPJ Web of Conferences, 284, p.01041_1 - 01041_4, 2023/05

https://doi.org/10.1051/epjconf/202328401041

Intensive fast neutron sources using deuteron accelerators have been proposed for the study of medical RI production, radiation damage for fusion reactor materials, nuclear transmutation of radioactive waste, and so on. Neutron production data from various materials bombarded by deuterons are required for the design of such neutron sources. In the present work, we have conducted a systematic measurement of double-differential neutron production cross sections (DDXs) for a wide atomic number range of targets (Li, Be, C, Al, Cu, Nb, In, Ta, and Au) at an incident energy of 200 MeV in the Research Center for Nuclear Physics (RCNP), Osaka University. A deuteron beam accelerated to 200 MeV was transported to the neutron experimental hall and focused on a thin target foil. Emitted neutrons from the target were detected by two different-size EJ301 liquid organic scintillators located at two distances of 7 m and 20 m, respectively. The neutron DDXs were measured at six angles from 0 to 25). The neutron energy was determined by a conventional time-of-flight (TOF) method. The measured DDXs were compared with theoretical model calculations by the DEUteron-induced Reaction Analysis Code System (DEURACS) and PHITS. The result indicated that the DEURACS calculation provides better agreement with the measured DDXs than the PHITS calculation.

Measurement of 107-MeV proton-induced double-differential neutron yields for iron for research and development of accelerator-driven systems

Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; Yashima, Hiroshi*; Nishio, Katsuhisa; et al.

JAEA-Conf 2022-001, p.129 - 133, 2022/11

https://doi.org/10.11484/jaea-conf-2022-001

For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors composed of the NE213 liquid organic scintillators and photomultiplier tubes, which were connected to a multi-channel digitizer mounted with a field-programmable gate array (FPGA), for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination applying the gate integration method to the FPGA. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics.

Study of the Li() reaction for the development of accelerator-based neutron sources

Watanabe, Yukinobu*; Sadamatsu, Hiroki*; Araki, Shohei*; Nakano, Keita*; Kawase, Shoichiro*; Kin, Tadahiro*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; et al.

EPJ Web of Conferences, 239, p.20012_1 - 20012_4, 2020/09

https://doi.org/10.1051/epjconf/202023920012

Accelerator-based neutron sources induced by deuteron beams are attractive for study of nuclear transmutation of radioactive waste as well as radiation damage for fusion reactor materials. In the present work, we have carried out a Double Differential cross section (DDX) measurement for Li at 200 MeV in the Research Center for Nuclear Physics (RCNP), Osaka University. A deuteron beam accelerated to 200 MeV was transported to the neutron experimental hall and focused on a thin Li target. Emitted neutrons from the target were detected by two different-size EJ301 liquid organic scintillators located at two distances of 7 m and 20 m, respectively. The neutron DDXs were measured at six angles from 0 to 25). The neutron detection efficiencies of the detectors were calculated by SCINFUL-QMD code. We will present the results of the present DDX measurement and compare them with theoretical model calculations with DEURACS and PHITS.

IRDFF-II; A New neutron metrology library

Trkov, A.*; Griffin, P. J.*; Simakov, S. P.*; Greenwood, L. R.*; Zolotarev, K. I.*; Capote, R.*; Aldama, D. L.*; Chechev, V.*; Destouches, C.*; Kahler, A. C.*; et al.

Nuclear Data Sheets, 163, p.1 - 108, 2020/01

https://doi.org/10.1016/j.nds.2019.12.001

The version II of the International Reactor Dosimetry and Fusion File (IRDFF-II) has been released as a consistent set of nuclear data for fission and fusion neutron metrology applications up to 60 MeV neutron energy. The library is intended to support: (a) applications in research reactors; (b) safety and regulatory applications in the nuclear power generation in commercial fission reactors; and c) material damage studies in support of the research and development of advanced fusion concepts. The paper describes the contents of the library, documents the thorough verification process used in its preparation, and provides an extensive set of validation data gathered from a wide range of neutron benchmark fields. The new library is expected to become the international reference in neutron metrology for multiple applications.

Radiation damage calculation in PHITS and benchmarking experiment for cryogenic-sample high-energy proton irradiation

Iwamoto, Yosuke; Matsuda, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Nakamoto, Tatsushi*; Yoshida, Makoto*; Ishi, Yoshihiro*; Kuriyama, Yasutoshi*; Uesugi, Tomonori*; Yashima, Hiroshi*; et al.

Proceedings of 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB 2018) (Internet), p.116 - 121, 2018/07

https://doi.org/10.18429/JACoW-HB2018-TUP2WE03

The radiation damage model in the radiation transport code PHITS has been developed to calculate the basic data of the radiation damage including the energy of the target Primary Knock on Atom (PKA). For the high-energy proton incident reactions, a target PKA created by the secondary particles was more dominant than a target PKA created by the projectile. To validate the radiation damage model in metals irradiated by 100 MeV protons, we developed a proton irradiation device with a Gifford-McMahon cryocooler to cryogenically cool wire samples. By using this device, the defect-induced electrical resistivity changes related to the DPA cross section of copper and aluminum were measured under irradiation with 125 and 200 MeV protons at cryogenic temperature. A comparison of the experimental data with the calculated results indicates that the DPA cross section with defect production efficiencies provide better quantitative descriptions.

Research and development for accuracy improvement of neutron nuclear data on minor actinides

Harada, Hideo; Iwamoto, Osamu; Iwamoto, Nobuyuki; Kimura, Atsushi; Terada, Kazushi; Nakao, Taro; Nakamura, Shoji; Mizuyama, Kazuhito; Igashira, Masayuki*; Katabuchi, Tatsuya*; et al.

EPJ Web of Conferences, 146, p.11001_1 - 11001_6, 2017/09

https://doi.org/10.1051/epjconf/201714611001

Experimental analysis of neutron and background -ray energy spectra of 80-400 MeV Li(p,n) reactions under the quasi-monoenergetic neutron field at RCNP, Osaka University

Iwamoto, Yosuke; Sato, Tatsuhiko; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; Masuda, Akihiko*; Matsumoto, Tetsuro*; Iwase, Hiroshi*; Shima, Tatsushi*; Nakamura, Takashi*

EPJ Web of Conferences, 153, p.08019_1 - 08019_3, 2017/09

https://doi.org/10.1051/epjconf/201715308019

To develop 100-400 MeV quasi-monoenergetic neutron field, we measured neutron and unexpected -ray energy spectra of the Li(p,n) reaction with 80-389 MeV protons in the 100-m time-of-flight (TOF) tunnel at the Research Center for Nuclear Physics (RCNP). Neutron energy spectra with energies above 3 MeV were measured by the TOF method and energy spectra with energies above 0.1 MeV were measured by the automatic unfolding function of the radiation dose monitor DARWIN. For neutron spectra, the contribution of peak intensity to the total intensity integrated with energies above 3 MeV varied between 0.38 and 0.48. For -ray spectra, high-energetic -rays at around 70 MeV originated from the decay of were observed over 200 MeV. For the 246-MeV proton incident reaction, the contribution of -ray dose to neutron dose is negligible because the ratio of -ray to neutron is 0.014.

Shielding experiments of concrete and iron for the 244 MeV and 387 MeV quasi-mono energetic neutrons using a Bonner sphere spectrometer (at RCNP, Osaka Univ.)

Matsumoto, Tetsuro*; Masuda, Akihiko*; Nishiyama, Jun*; Iwase, Hiroshi*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; Yashima, Hiroshi*; Shima, Tatsushi*; et al.

EPJ Web of Conferences, 153, p.08016_1 - 08016_3, 2017/09

https://doi.org/10.1051/epjconf/201715308016

Neutron energy spectra behind concrete and iron shields were measured for quasi-monoenergetic neutrons above 200 MeV using a Bonner sphere spectrometer (BSS). Quasi-monoenergetic neutrons were produced by the Li(p,xn) reaction with 246-MeV and 389-MeV protons. The response function of BSS was also measured at neutron energies from 100 MeV to 387 MeV. In data analysis, the measured response function was used and the multiple neutron scattering effect between the BSS and the shielding material was considered. The neutron energy spectra behind the concrete and iron shields were obtained by the unfolding method using the MAXED code. Ambient dose equivalents were obtained as a function of a shield thickness successfully. For the case of the 244 MeV neutron incidence, the multiple neutron scattering effect on the effective dose is large under 50 cm thickness of the concrete shield.

Applicability of the two-angle differential method to response measurement of neutron-sensitive devices at the RCNP high-energy neutron facility

Masuda, Akihiko*; Matsumoto, Tetsuro*; Iwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Sato, Tatsuhiko; Iwase, Hiroshi*; Yashima, Hiroshi*; Nakane, Yoshihiro; Nishiyama, Jun*; et al.

Nuclear Instruments and Methods in Physics Research A, 849, p.94 - 101, 2017/03

https://doi.org/10.1016/j.nima.2016.12.031

Quasi-monoenergetic high-energy neutron fields induced by Li(p,n) reactions are used for the response evaluation of neutron-sensitive devices. The quasi-monoenergetic high-energy field consists of high-energy monoenergetic peak neutrons and unwanted continuum neutrons down to the low-energy region. A two-angle differential method has been developed to compensate for the effect of the continuum neutrons in the response measurements. In this study, the two-angle differential method was demonstrated for Bonner sphere detectors, which are typical examples of moderator-based neutron-sensitive detectors, to investigate the method's applicability and its dependence on detector characteristics. Through this study, the adequacy of the two-angle differential method was experimentally verified, and practical suggestions were made pertaining to this method.