Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakayama, Shinsuke; Iwamoto, Osamu; Kimura, Atsushi
EPJ Web of Conferences, 294, p.07001_1 - 07001_6, 2024/04
Graphite is a candidate of moderator in innovative nuclear reactors such as molten salt reactors. Scattering of thermal neutrons by the moderator material has a significant impact on the reactor core design. To contribute to the development of innovative nuclear reactors, an evaluation method of thermal neutron scattering law for reactor grade graphite was studied. The inelastic scattering component due to lattice vibration was evaluated based on the phonon density of states computed with first-principles lattice dynamics simulations. The simulations were performed for ideal crystalline graphite. The coherent elastic scattering component due to crystal structure was evaluated based on neutron transmission and scattering experiments recently performed in the J-PARC/MLF facility. In comparison with the neutron transmission experiments, it was found that the quantification of small-angle neutron scattering due to structures larger than crystal, such as pores in graphite, is important. Based on the above methods, thermal neutron scattering law data for reactor-grade graphite at room temperature were evaluated.
Yamano, Hidemasa; Futagami, Satoshi; Ando, Masanori; Kurisaka, Kenichi
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 11 Pages, 2024/03
In this study, the dynamic structural analysis of the reactor vessel for excessive earthquake using the FINAS/STAR code has shown the elephant foot buckling deformation and calculated the cumulative fatigue failure fraction. Using the calculation results, this paper describes the fragility curve using the safety factor method, indicating the significantly improved curve compared the previous one.
Kasahara, Naoto*; Yamano, Hidemasa; Nakamura, Izumi*; Demachi, Kazuyuki*; Sato, Takuya*; Ichimiya, Masakazu*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
In this study, we propose failure mitigation methods by application of passive safety structures. The idea of the passive safety structures was applied to next generation fast reactors under high temperature conditions and excessive earthquake conditions.
Horii, Yuta; Hirooka, Shun; Uno, Hiroki*; Ogasawara, Masahiro*; Tamura, Tetsuya*; Yamada, Tadahisa*; Furusawa, Naoya*; Murakami, Tatsutoshi; Kato, Masato
Journal of Nuclear Materials, 588, p.154799_1 - 154799_20, 2024/01
Times Cited Count：1 Percentile：72.91(Materials Science, Multidisciplinary)The thermal conductivities of near-stoichiometric (U,Pu,Am)O
doped with NdO
/SmO, which is major fission product (FP) generated by a uranium-plutonium mixed oxides (MOX) fuel irradiation, as simulated fission products are evaluated at 1073-1673 K. The thermal conductivities are calculated from the thermal diffusivities that are measured using the laser flash method. To evaluate the thermal conductivity from a homogeneity viewpoint of Nd/Sm cations in MOX, the specimens with different homogeneity of Nd/Sm are prepared using two kinds of powder made by ball-mill and fusion methods. A homogeneous Nd/Sm distribution decreases the thermal conductivity of MOX with increasing Nd/Sm content, whereas heterogeneous Nd/Sm has no influence. The effect of Nd/Sm on the thermal conductivity is studied using the classical phonon transport model (A+BT)
. The dependences of the coefficients A and B on the Nd/Sm content (C
and C
, respectively) are evaluated as: A(mK/W)=1.70 
10
+ 0.93C + 1.20C, B(m/W)=2.39 10
.
Hirooka, Shun; Horii, Yuta; Sunaoshi, Takeo*; Uno, Hiroki*; Yamada, Tadahisa*; Vauchy, R.; Hayashizaki, Kohei; Nakamichi, Shinya; Murakami, Tatsutoshi; Kato, Masato
Journal of Nuclear Science and Technology, 60(11), p.1313 - 1323, 2023/11
Times Cited Count：3 Percentile：95.99(Nuclear Science & Technology)Additive MOX pellets are fabricated by a conventional dry powder metallurgy method. NdO and SmO are chosen as the additive materials to simulate the corresponding soluble fission products dispersed in MOX. Shrinkage curves of the MOX pellets are obtained by dilatometry, which reveal that the sintering temperature is shifted toward a value higher than that of the respective regular MOX. The additives, however, promote grain growth and densification, which can be explained by the effect of oxidized uranium cations covering to a pentavalent state. Ceramography reveals large agglomerates after sintering, and Electron Probe Micro-Analysis confirms that inhomogeneous elemental distribution, whereas XRD reveals a single face-centered cubic phase. Finally, by grinding and re-sintering the specimens, the cation distribution homogeneity is significantly improved, which can simulate spent nuclear fuels with soluble fission products.
Futagami, Satoshi; Yamano, Hidemasa; Kurisaka, Kenichi; Ujita, Hiroshi*
Proceedings of proceedings of PSAM 2023 Topical Conference AI & Risk Analysis for Probabilistic Safety/Security Assessment & Management, 8 Pages, 2023/10
To create an innovation for efficient and effective social implementation of nuclear power plant PRA, automatic construction tool for fault tree architecture and automatic failure judgment tool to construct reliability database are developed by using AI and digitization technology. This paper describes overall development plan of PRA methodology using the AI technology and the progress of automatic FT creation tools development.
Yamano, Hidemasa; Kurisaka, Kenichi; Takano, Kazuya; Kikuchi, Shin; Kondo, Toshiki; Umeda, Ryota; Shirakura, Shota*
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
This project studies investigation on safety design guideline and risk assessment technology for sodium-cooled fast reactor with the molten-salt heat storage system, development of evaluation method for heat transferring performance between sodium and molten-salt and improvement of the performance, and evaluation of chemical reaction characteristic between sodium and molten-salt and improvement of its safety. The project overview is presented in this report.
Ukai, Shigeharu; Sakamoto, Kan*; Otsuka, Satoshi; Yamashita, Shinichiro; Kimura, Akihiko*
Journal of Nuclear Materials, 583, p.154508_1 - 154508_24, 2023/09
Times Cited Count：5 Percentile：94.3(Materials Science, Multidisciplinary)Miyagawa, Akihisa*; Hayashi, Naoki*; Kuzure, Yoshiaki*; Takahashi, Takumi*; Iwamoto, Hibiki*; Arai, Tsuyoshi*; Nagatomo, Shigenori*; Miyazaki, Yasunori; Hasegawa, Kenta; Sano, Yuichi; et al.
Bulletin of the Chemical Society of Japan, 96(7), p.671 - 676, 2023/07
Times Cited Count：2 Percentile：71.3(Chemistry, Multidisciplinary)We investigated the distribution mechanism of Eu(III) in a single polymer-coated silica particle including nitrilotriacetamide (NTA) extractants known as HONTA and TOD2EHNTA. The present study provides a valuable approach for the evaluation and enhancement of the functionality of "single extractant-impregnated polymer-coated silica particle".
Gd and 
Gd in the thermal energy region with the Li-glass detectors and NaI(Tl) spectrometer installed in J-PARC
MLFANNRIKimura, Atsushi; Nakamura, Shoji; Endo, Shunsuke; Rovira Leveroni, G.; Iwamoto, Osamu; Iwamoto, Nobuyuki; Harada, Hideo; Katabuchi, Tatsuya*; Terada, Kazushi*; Hori, Junichi*; et al.
Journal of Nuclear Science and Technology, 60(6), p.678 - 696, 2023/06
Times Cited Count：2 Percentile：53.91(Nuclear Science & Technology)Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta*; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
EPJ Web of Conferences, 284, p.01023_1 - 01023_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron, lead, and bismuth have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics. The measured TTNYs and DDXs were compared with calculations by the Monte Carlo transport code PHITS with its default physics model of INCL version 4.6 combined with GEM and those with the JENDL-4.0/HE nuclear data library.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
Journal of Nuclear Science and Technology, 60(4), p.435 - 449, 2023/04
Times Cited Count：3 Percentile：68.71(Nuclear Science & Technology)Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small NE213 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e., INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e., JENDL-4.0/HE, implemented in the particle and heavy iontransport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of 5
. Comparing the energy- and angle-integrated spallation neutron yields at energies of 
20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA.
gyrokinetic simulations of ohmic L-mode plasmas in linear and saturated ohmic confinement regimesIdomura, Yasuhiro; Dif-Pradalier, G.*; Garbet, X.*; Sarazin, Y.*; Tore Supra Teams*
Physics of Plasmas, 30(4), p.042508_1 - 042508_18, 2023/04
Times Cited Count：1 Percentile：56.19(Physics, Fluids & Plasmas)Two time slices in linear and saturated ohmic confinement (LOC and SOC) regimes in a Tore Supra ohmic L-mode discharge are analyzed using nonlinear global full- gyrokinetic simulations, and qualitative features of the LOC-SOC transition are reproduced. The exhaust of carbon impurity ions is caused by fast ion mixing, which is driven by the toroidal field stress. The intrinsic rotation develops in the opposite direction between the LOC and SOC phases, which is characterized by the different features of the mode asymmetry between trapped electron modes in the LOC phase and ion temperature gradient driven modes in the SOC phase, leading to the change of the profile shear stress. The energy fluxes of electrons and deuterium ions are dominant in the LOC and SOC phases, respectively, and the ratio of the energy confinement time between two phases agree with the experimental value.
Katabuchi, Tatsuya*; Iwamoto, Osamu; Hori, Junichi*; Kimura, Atsushi; Iwamoto, Nobuyuki; Nakamura, Shoji; Rovira Leveroni, G.; Endo, Shunsuke; Shibahara, Yuji*; Terada, Kazushi*; et al.
EPJ Web of Conferences, 281, p.00014_1 - 00014_4, 2023/03
Otsuka, Satoshi; Shizukawa, Yuta; Tanno, Takashi; Imagawa, Yuya; Hashidate, Ryuta; Yano, Yasuhide; Onizawa, Takashi; Kaito, Takeji; Onuma, Masato*; Mitsuhara, Masatoshi*; et al.
Journal of Nuclear Science and Technology, 60(3), p.288 - 298, 2023/03
Times Cited Count：4 Percentile：78.52(Nuclear Science & Technology)JAEA has been developing 9Cr-oxide dispersion strengthened (ODS) tempered martensitic steel(TMS) as a candidate material for the fuel cladding tubes of sodium-cooled fast reactors(SFRs). The reliable prediction of in-reactor creep-rupture strength is critical for implementing the 9Cr-ODS TMS cladding tube in the SFR. This study investigated the quantitative correlation between the creep properties of 9Cr-ODS TMS at 700 C and the dispersions of nanosized oxides by analyzing the creep data and the material's nanostructure. The possibility of deriving a formula for estimating the in-reactor creep properties of 9Cr-ODS TMSs based on an analysis of the nanostructure of neutron-irradiated 9Cr-ODS TMSs was also discussed. The creep properties of 9Cr-ODS TMS at 700 C closely correlated with the dispersion of nanosized oxide particles. The correlation between creep-rupture lives and nanosized oxide particle dispersion was determined using existing creep models. The elucidation of correlation between the stress exponent of secondary creep rate and the nanostructure is essential to enhance future modeling reliability and formulation.
(M = Gd, Np) by the reaction of MN with Pd and chlorination of MPd using cadmium chlorideHayashi, Hirokazu; Shibata, Hiroki; Sato, Takumi; Otobe, Haruyoshi
Journal of Radioanalytical and Nuclear Chemistry, 332(2), p.503 - 510, 2023/02
Times Cited Count：0 Percentile：0.01(Chemistry, Analytical)The formation of MPd (M = Gd, Np) by the reaction of MN with Pd at 1323 K in Ar gas flow was observed. Cubic AuCu
-type GdPd
(
= 0.4081 
0.0001 nm) and NpPd ( = 0.4081 0.0001 nm) were identified, respectively. The product obtained from the reaction of NpN with Pd contained additional phases including the hexagonal TiNi-type NpPd. Chlorination of the MPd (M = Gd, Np) samples was accomplished by the solid-state reaction using cadmium chloride at 673 K in a dynamic vacuum. Pd-rich solid solution phase saturated with Cd and an intermetallic compound PdCd were obtained as by-products of MCl formation.
Yamano, Hidemasa; Kurisaka, Kenichi; Takano, Kazuya; Kikuchi, Shin; Kondo, Toshiki; Umeda, Ryota; Shirakura, Shota*; Hayashi, Masaaki*
Proceedings of 8th International Conference on New Energy and Future Energy Systems (NEFES 2023) (Internet), p.27 - 34, 2023/00
Times Cited Count：0This project studies investigation on safety design guideline and risk assessment technology for sodium-cooled fast reactor with the molten-salt heat storage system, development of evaluation method for heat transferring performance between sodium and molten-salt and improvement of the performance, and evaluation of chemical reaction characteristic between sodium and molten-salt and improvement of its safety. The project overview is presented in this report.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; Yashima, Hiroshi*; Nishio, Katsuhisa; et al.
JAEA-Conf 2022-001, p.129 - 133, 2022/11
For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors composed of the NE213 liquid organic scintillators and photomultiplier tubes, which were connected to a multi-channel digitizer mounted with a field-programmable gate array (FPGA), for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination applying the gate integration method to the FPGA. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics.
Mineo, Hideaki
Nihon Genshiryoku Gakkai-Shi ATOMO
, 64(11), p.617 - 621, 2022/11
In December 2016 Decisions were made by the Government on the Fast Breeder Prototype Reactor "Monju", which were decommissioning of the reactor and installation of a new research reactor at the Monju site. After the decisions, MEXT started research to list reactor candidates suitable for the site. Among the candidates, medium power reactor type of which thermal output less than 10,000 kW was chosen to utilize neutron beams. Then, from 2020, MEXT launched an entrusted business and adopted JAEA, Kyoto University and University of Fukui as the core institutions of the business to carry out the conceptual design. This paper describes the system to proceed the conceptual design and to examine the utilization management of the new research reactor and also shows their status.
Mo/
Tc by PWRNasu, Takuya*; Fujita, Yoshitaka
Enerugi Rebyu, 42(10), p.15 - 18, 2022/09
no abstracts in English
