Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamada, Ippei; Chimura, Motoki; Kamiya, Junichiro; Kinsho, Michikazu
Journal of Physics; Conference Series, 2687, p.072018_1 - 072018_6, 2024/01
no abstracts in English
Shobuda, Yoshihiro
Physical Review Accelerators and Beams (Internet), 27(1), p.011001_1 - 011001_25, 2024/01
Times Cited Count：0 Percentile：0.44(Physics, Nuclear)When computing the space charge tune shift for a relativistic bunched beam within a cylindrical chamber, mirror currents for a coasting beam, initially introduced to replace the chamber wall, are employed. Subsequently, the obtained result is extended to encompass the bunched beam, taking into account the bunching factor which quantifies the distribution of bunches around the accelerator ring. In the process of derivation, the terms that characterize the bunch length are intuitively integrated into the formula. As a result, the validity of this approach has never been established. This study provides the derivation of the space charge tune shift formula for both relativistic and non-relativistic bunched beams right from the outset, employing the Green function formalism. Subsequently, it is compared with the earlier formula derived using mirror currents.
Ono, Ayato; Takayanagi, Tomohiro; Fuwa, Yasuhiro; Shinozaki, Shinichi; Ueno, Tomoaki*; Horino, Koki*; Sugita, Moe; Yamamoto, Kazami; Kinsho, Michikazu; Ikoma, Naoya*; et al.
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.871 - 876, 2023/11
In J-PARC, an ignitron is used for the crowbar device of the klystron power supply to excite the RF acceleration voltage in a Linac cavity. Mercury, that is used in the ignitron, would be prohibition of use in the future due to environmental protection. Therefore, we designed a semiconductor crowbar switch for short-circuit protection of klystron using a MOS gate thyristor. We have manufactured an oval-type board module that realizes an operating output of 3kV, 40kA, and 50us per board. Because a high voltage of 120 kV is applied on each board, we adopted a self-power supply method to supply a electricity for the control system. This method can create the electricity from a high-voltage DCDC converter. We confirmed the operating performance on a 1/2 scale (60 kV, 40 kA) of the voltage in the existing ignitron system (120 kV, 40 kA). We also studied a test circuit in a higher voltage range of more than 90 kV. Our latest result is well promising for an alternative system of ignitron.
Nakanoya, Takamitsu; Yoshimoto, Masahiro; Saha, P. K.; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.937 - 941, 2023/11
In the J-PARC 3GeV Rapid Cycling Synchrotron (RCS), the 400MeV H
beam is changed to H+ beam by a charge exchange foil and accelerated to 3GeV. So far, RCS had used two types of charge exchange foil. One is the HBC (Hybrid Boron mixed Carbon) foil and the other is the Kaneka GTF (Graphene Thin Film). HBC foil is a patented deposition method developed at KEK for the stable production of thick carbon foil. Initially, the RCS used HBC foil produced atKEK. However, in 2017, JAEA had started HBC foil production and has been using it since then. Recently, we have succeeded in depositing thick pure carbon foil, which had been considered difficult to produce by the arc deposition method. As a new challenge, this pure carbon foil was used in the user operation from March 2023. As a result, Pure carbon foils showed less deformation and more stable charge exchange performance than HBC and GTF.
Shinto, Katsuhiro; Okoshi, Kiyonori; Shibata, Takanori*; Nammo, Kesao*; Kawai, Isao*; Ikegami, Kiyoshi*; Ueno, Akira
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.928 - 931, 2023/11
J-PARC initiated the operation of the high-intensity rf-driven negative hydrogen (H
) ion source in 2014 autumn. The ion source produces the H beam with the beam current of 60 mA and the beam energy of 50 keV in order to inject the H beam into the 3 GeV RCS with the beam current of 50 mA and the beam energy of 400 MeV from the J-PARC linac. We have achieved the longest continuous operation time of 4001 hours in the previous (2021/2022) campaign. The 2022/2023 campaign was the first time that the continuous operation of the H ion source without any exchanges of the ion source until the end of the campaign was examined. We present the operation status of the J-PARC H ion source in this campaign as well as the status of the J-PARC-made internal antenna test.
Shinto, Katsuhiro; Shibata, Takanori*; Wada, Motoi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.392 - 395, 2023/11
Negative hydrogen (H) ion sources which are used at high-intensity proton accelerator facilities such as J-PARC or neutral beam injection system for plasma heating in the fusion devices such as ITER produce plasmas by using RF sources driving with the frequency of 1-2 MHz. We have shown that the H beams extracted from the RF-driven H ion source with the frequency of several MHz have some fluctuations with the frequency of the fundamental and second harmonics. The reason is that the high plasma density is produced in the ion source with the low driving frequency. Therefore, we propose the driving RF frequency same as the RF sources with that of 324 MHz in the J-PARC linac, which is much higher than the ion plasma frequency, is used for producing the plasma to suppress the H beam fluctuations. As a first step, we performed a design of a matching circuit for the higher frequency driven H ion source. We present the background for decision of a new RF amplifier with much higher frequency and the design results.
beam at J-PARC RCSSaha, P. K.; Harada, Hiroyuki; Yoneda, Hitoki*; Michine, Yurina*; Sato, Atsushi*; Shibata, Takanori*; Kinsho, Michikazu
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.59 - 63, 2023/11
Tamura, Fumihiko; Okita, Hidefumi; Hotchi, Hideaki*; Saha, P. K.; Meigo, Shinichiro; Yoshii, Masahito*; Omori, Chihiro*; Yamamoto, Masanobu; Seiya, Kiyomi*; Sugiyama, Yasuyuki*; et al.
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.64 - 68, 2023/11
The J-PARC 3GeV synchrotron (RCS) provides high intensity proton beams to the Materials and Life Science Experimental Facility (MLF) and the Main Ring (MR). The harmonic number (h) of the RCS is 2 and the RCS normally accelerates two bunches. For some experiments at the MLF, a single bunch is preferred. In this case, one of the rf bucket is filled with protons and the other is empty. Therefore the beam intensity is halved. If the RCS can accelerate with h=1, the intensity per bunch can be doubled, enabling to provide single bunch beams to the MLF with the maximum intensity. This possibly increases the MR beam power by injecting high intensity single bunches eight times. In this presentation, we report mainly on the consideration of h=1 acceleration in the RCS by longitudinal simulations.
Sugita, Moe; Takayanagi, Tomohiro; Ueno, Tomoaki*; Ono, Ayato; Horino, Koki*; Kinsho, Michikazu; Oguri, Hidetomo; Yamamoto, Kazami
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.519 - 522, 2023/11
In J-PARC RCS, paint bump magnets are used to displace the beam orbit during paint injection, which produces a high intensity beam. A pattern of command current and command voltage can be used to create an output current waveform that varies the beam orbit over time. The accuracy of beam orbit control is determined by the shape difference between the command current and output current waveforms. In the current paint pattern adjustment, a deviation of 
1% or less is achieved by manual adjustment after using software that adjusts the pattern according to the response function of the power supply control. However, we would like to reduce the adjustment time. In addition, since the accuracy of paint injection is determined by the adjustment system of the paint magnet power supply, we would like to achieve output current deviation 10 times more precise than before to reduce beam loss. An analytical model of the load-side impedance is necessary to create a high-precision paint pattern, but it is very difficult to construct an analytical model because the load-side impedance changes in a time-varying nonlinear paint pattern. We used machine learning to adjust the output pattern of the paint pattern and achieved a deviation of less than 0.5% through repeated learning. This presentation will report on the current status of the system and its prospects.
Yoshimura, Nobuyuki*; Toyama, Takeshi*; Shobuda, Yoshihiro; Nakamura, Takeshi*; Omi, Kazuhito*; Kobayashi, Aine*; Okada, Masashi*; Sato, Yoichi*; Nakaya, Tsuyoshi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.260 - 264, 2023/11
The J-PARC main ring (MR) will be increased to 1.3 MW. To cope with the increase in beam intensity, the intra-bunch feedback system (IBFB) needs to be upgraded to handle higher frequencies up to about 200 MHz. To evaluate the performance and understand the optimal parameters after this upgrade, we are developing a particle tracking simulation that includes the necessary components. The recoherence period induced by chromaticity between tracking simulations and experiments are compared and it cannot be discribed by the simple simulations, and we investigate what mechanisms explain this result. The shift of synchrotron tune caused by longitudinal wakes using tracking simulations are calculated and it find that introducing the effect of longitudinal wakes only does not explain the recoherence period in the experimental results.
Nagayama, Shota; Harada, Hiroyuki; Shimogawa, Tetsushi*; Sato, Atsushi*; Yamada, Ippei; Chimura, Motoki; Kojima, Kunihiro; Yamamoto, Kazami; Kinsho, Michikazu
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.526 - 530, 2023/11
We have been developing "Non-destructive electrostatic septum" for a slow extraction. This septum has multiple electrodes placed around the region without the beam hitting and separate the beam by its electric field. To evaluate its electric field, we have built a prototype septum and a test machine, which consists of an electron gun and monitors. This test machine can measure the electric field indirectly by using a narrow electron beam. The experiment results of prototype septum is good agreement with the calculation one. However, this electric field distribution is not enough to separate the beam. A step function-like electric field distribution is ideal for the beam separation with minimal negative effect on the beam. We have studied to improve the electrode configuration to match the beam shape. In this paper, we present the result of the electric field measurements and the septum improvement. Additionally, we describe the future plan of this development.
Watanabe, Yasuhiro; Yanagibashi, Takanori; Komatsuzaki, Makoto*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1024 - 1028, 2023/10
J-PARC RCS accelerates a high-intensity proton beam from 400 MeV to 3 GeV at a repetition rate of 25 Hz. The main magnet system of the RCS is composed of a family of dipole magnets and seven families of quadrupole magnets excited by eight independent resonant circuits. The current control system of the main magnet power supply requires high-precision tracking control between different magnet families. The original control system of the main magnet power supply had been operated without major problems for fifteen years since the start of operation of the RCS, while the control system component is obsolete. We developed a new power supply controller based on SoC FPGA. The controller consists of a main board and four daughter boards and all functions required for current control of the power supply are installed in a 19-inch rack 2U control unit.
Yamamoto, Masanobu; Nomura, Masahiro; Okita, Hidefumi; Shimada, Taihei; Tamura, Fumihiko; Hara, Keigo*; Hasegawa, Katsushi*; Omori, Chihiro*; Sugiyama, Yasuyuki*; Yoshii, Masahito*
Progress of Theoretical and Experimental Physics (Internet), 2023(7), p.073G01_1 - 073G01_16, 2023/07
Times Cited Count：0 Percentile：0.01(Physics, Multidisciplinary)The Japan Proton Accelerator Research Complex (J-PARC) Rapid Cycling Synchrotron (RCS) employs Magnetic Alloy (MA) loaded cavities. We realize multi-harmonic rf driving and beam loading compensation owing to the broadband characteristics of the MA. The currently installed cavity is the conventional type one which is designed to be driven by tube amplifiers in a push-pull operation. The push-pull operation has some advantages, i.e., suppressing a higher harmonic distortion without the beam acceleration and shortening the cavity length. However, a disadvantage arises at the high intensity beam acceleration where the multi-harmonic rf driving causes a severe imbalance of the anode voltage swing and restricts the tube operation. Although we have achieved an acceleration for the design beam power of 1 MW, the imbalance becomes an issue to further increase the beam power. We have developed a single-ended MA cavity to avoid such difficulty. The cavity has no tube imbalance intrinsically and it is found that the power consumption to drive the cavity can be reduced compared with the conventional one.
Yamamoto, Kazami; Ogiwara, Norio*; Kuramochi, Masaya*
e-Journal of Surface Science and Nanotechnology (Internet), 21(4), p.359 - 364, 2023/07
In recent years, durable target is required according to increase of the beam power. To solve this problem, a liquid film was formed in vacuum and tested it as a target. An ethanol and a mercury were selected as liquid target materials, and we investigated whether the liquid sheet could be formed stably in a vacuum and how about the vacuum pressure. As a result, it was confirmed that the liquid films were stably formed in both case and the pressures with the films were about the vapor pressure of the materials.
Kamiya, Junichiro; Takano, Kazuhiro*; Wada, Kaoru; Yanagibashi, Toru*
e-Journal of Surface Science and Nanotechnology (Internet), 21(3), p.144 - 153, 2023/06
no abstracts in English
Shobuda, Yoshihiro; Harada, Hiroyuki; Saha, P. K.; Takayanagi, Tomohiro; Tamura, Fumihiko; Togashi, Tomohito; Watanabe, Yasuhiro; Yamamoto, Kazami; Yamamoto, Masanobu
Physical Review Accelerators and Beams (Internet), 26(5), p.053501_1 - 053501_45, 2023/05
Times Cited Count：0 Percentile：0.02(Physics, Nuclear)At the Rapid Cycling Synchrotron (RCS) in Japan Proton Accelerator Research Complex (J-PARC), theoretical predictions have indicated that the kicker-impedance would excite the beam-instability. A 1 MW beam with large emittance can be delivered to the Material and Life Science Experimental Facility (MLF) through suppression of the beam instabilities by choosing the appropriate machine parameters. However, we require other high-intensity and high-quality smaller emittance beams (than the 1 MW beam) for the Main Ring (MR). Hence, we proposed a scheme for suppressing the kicker-impedance by using prototype diodes and resistors, thereby demonstrating the effect on the kicker impedance reduction. However, the J-PARC RCS must be operated with a repetition rate of 25 Hz, which urged us to consider special diodes that are tolerant to heating. After developments, we have demonstrated that the special diodes with resistors can suppress the beam instability by reducing the kicker impedance. Enhanced durability of the prototype diodes and resistors for the 25 Hz operation was also realized. Moreover, the new diodes and the resistors have negligible effect on the extracted beam from the RCS. From a simulation point of view, the scheme can be employed for at least 5 MW beam operation within the stipulated specifications.
Kamiya, Junichiro; Nii, Keisuke*; Kabumoto, Hiroshi; Kondo, Yasuhiro; Tamura, Jun; Harada, Hiroyuki; Matsui, Yutaka; Matsuda, Makoto; Moriya, Katsuhiro; Ida, Yoshiaki*; et al.
e-Journal of Surface Science and Nanotechnology (Internet), 21(4), p.344 - 349, 2023/05
no abstracts in English
particles generated by residual gas stripping in the Japan Proton Accelerator Research Complex linacTamura, Jun; Futatsukawa, Kenta*; Kondo, Yasuhiro; Liu, Y.*; Miyao, Tomoaki*; Morishita, Takatoshi; Nemoto, Yasuo*; Okabe, Kota; Yoshimoto, Masahiro
Nuclear Instruments and Methods in Physics Research A, 1049, p.168033_1 - 168033_7, 2023/04
Times Cited Count：1 Percentile：72.91(Instruments & Instrumentation)The Japan Proton Accelerator Research Complex (J-PARC) linac is a high-intensity accelerator in which beam loss is a critical issue. In the J-PARC linac, H beams are accelerated to 191~MeV by a separated drift tube linac (SDTL) and subsequently to 400~MeV by an annular-ring coupled structure (ACS). Because there are more beam loss mechanisms in H linacs than in proton linacs, it is imperative to investigate the beam loss circumstances for beam loss mitigation. Electron-stripping phenomena, which generate uncontrollable H particles, are characteristic beam loss factors of H linacs. To clarify the beam loss causes in the J-PARC linac, a new diagnostic line was installed in the beam transport between the SDTL and ACS. In this diagnostic line, H particles were separated from the H beam, and the intensity profiles of the H particles were successfully measured by horizontally scanning a graphite plate in the range where H particles were distributed. By examining the intensity variation of the H particles with different residual pressure levels, we proved that half of the H particles in the SDTL section are generated by the residual gas stripping in the nominal beam operation of the J-PARC linac.
Ono, Ayato; Takayanagi, Tomohiro; Sugita, Moe; Ueno, Tomoaki*; Horino, Koki*; Yamamoto, Kazami; Kinsho, Michikazu
JAEA-Technology 2022-036, 31 Pages, 2023/03
JAEA-Technology-2022-036.pdf:8.77MB
In the Japan Atomic Energy Agency (JAEA), many electrical facilities such as power receiving equipment and power supply units are installed in experimental facilities such as the Nuclear Science Research Institute (NSRI) and the Japan Proton Accelerator Research Complex (J-PARC). However, some facilities have been in operation for more than half a century since they were manufactured, some have already been closed or deactivated, and others are still in operation while replacing parts and taking other aging measures. In these facilities, materials that were used because of their excellent properties at the time of manufacture are now designated as hazardous substances and require special management when disposed of. One of them is polychlorinated biphenyl (PCB). PCB were used in a very wide range of fields because of their stability against heat, high electrical insulation, and chemical resistance. However, it was found that PCB have persistent properties and may cause damage to human health and the living environment, and the government has enacted the "Act on Special Measures for Promotion of Proper Treatment of PCB Wastes (PCB Special Measures Law)" to promote reliable and proper disposal. JAEA has almost completed the excavation survey of high-concentration PCB waste and is in the process of excavating low-concentration PCB waste. However, there are still new relevant items to be discovered. This report summarizes and reports the knowledge necessary for identifying PCB waste and points to be noted when handling capacitors, etc., based on examples of actual disassembly and investigation work conducted on power supply units and other electrical equipment, such as capacitors attached to power supply units, etc.
Kitamura, Ryo; Futatsukawa, Kenta*; Hayashi, Naoki; Hirano, Koichiro; Kondo, Yasuhiro; Kosaka, Satoshi*; Miyao, Tomoaki*; Morishita, Takatoshi; Nemoto, Yasuo*; Oguri, Hidetomo
Physical Review Accelerators and Beams (Internet), 26(3), p.032802_1 - 032802_12, 2023/03
Times Cited Count：0 Percentile：0.02(Physics, Nuclear)A bunch-shape monitor (BSM) is a useful device for performing longitudinal beam tuning using the pointwise longitudinal phase distribution measured at selected points in the beam transportation. To measure the longitudinal phase distribution of a low-energy negative hydrogen (H) ion beam, highly oriented pyrolytic graphite (HOPG) was adopted for the secondary-electron-emission target to mitigate the thermal damage due to the high-intensity beam loading. The HOPG target enabled the measurement of the longitudinal phase distribution at the center of a 3-MeV H ion beam with a high peak current of about 50 mA. The longitudinal bunch width was measured using HOPG-BSM at the test stand, which was consistent with the beam simulation. The correlation measurement between the beam transverse and longitudinal planes was demonstrated using HOPG-BSM. The longitudinal Twiss and emittance measurement with the longitudinal Q-scan method was conducted using HOPG-BSM.
