High spatial resolution neutron transmission imaging using a superconducting two-dimensional detector

Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; et al.

IEEE Transactions on Applied Superconductivity, 31(9), p.2400505_1 - 2400505_5, 2021/12

https://doi.org/10.1109/TASC.2021.3111396

In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method. We obtained the neutron transmission images of a Gd-Al alloy sample, inside which single crystals of GdAl were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al-Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 m 12 m. Gd selective imaging was performed using the resonance dip of Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm.

Homogeneity of neutron transmission imaging over a large sensitive area with a four-channel superconducting detector

Vu, TheDang; Shishido, Hiroaki*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Oku, Takayuki; Soyama, Kazuhiko; Aizawa, Kazuya; et al.

Superconductor Science and Technology, 34(1), p.015010_1 - 015010_10, 2021/01

https://doi.org/10.1088/1361-6668/abc2af

Analysis of ion-irradiation induced lattice expansion and ferromagnetic state in CeO by using Poisson distribution function

Yamamoto, Yuki*; Ishikawa, Norito; Hori, Fuminobu*; Iwase, Akihiro*

Quantum Beam Science (Internet), 4(3), p.26_1 - 26_13, 2020/09

https://doi.org/10.3390/qubs4030026

The lattice constant and the magnetic state of CeO are modified by the irradiation with 200 MeV Xe ions. Under the assumption that these modifications are induced in the narrow one-dimensional region (the ion track) along the ion beam path, the dependence of the lattice constant and the saturation magnetization of CeO on the Xe ion fluence can be analyzed by using the Poisson distribution function. The analysis reveals that the lattice constant inside the ion track, which is larger than outside the ion track is not affected by the overlapping of the ion track. The present result implies that the Poisson distribution function is useful for describing the effect of ion track overlapping on the ion irradiation induced ferromagnetic state in CeO.

Energy-resolved neutron imaging with high spatial resolution using a superconducting delay-line kinetic inductance detector

Iizawa, Yuki*; Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Hidaka, Mutsuo*; et al.

Superconductor Science and Technology, 32(12), p.125009_1 - 125009_8, 2019/12

https://doi.org/10.1088/1361-6668/ab4e5c

Radiolysis of mixed solutions of Cl and Br and its effect on corrosion of a low-alloy steel

Hata, Kuniki; Inoue, Hiroyuki*; Kojima, Takao*; Kasahara, Shigeki; Hanawa, Satoshi; Ueno, Fumiyoshi; Tsukada, Takashi; Iwase, Akihiro*

Proceedings of Symposium on Water Chemistry and Corrosion in Nuclear Power Plants in Asia 2017 (AWC 2017) (USB Flash Drive), p.304 - 314, 2017/09

A model simulation of radiolysis of mixed solutions of NaCl and NaBr was carried out. The simulation result agreed well with the experimental result, and Br played an important role in determining the amounts of products from water radiolysis. The simulation result also showed that, in highly pure NaCl solutions, the steady-state concentration of a radolytic product, HO, was mainly controlled by three reactions (Cl + OH ClOH, ClOH Cl + OH, and ClOH + H Cl + HO), which indicated that accurate evaluation of the rate constants of these reactions was very important in improving the radiolysis simulation of solutions containing Cl. An immersion test using a low-alloy steel, SQV2A, in the mixed solutions was also carried out under irradiation. The corrosion rate increased or decreased depending on the pH or the concentrations of the halide ions in a similar way to the change in concentration of HO produced from water radiolysis, which is affected by the presence of Cl and Br. However, at high pH values (12), the corrosion rate was almost zero even though the concentration of HO was high. This could be attributed to enhancement of the passivity of test specimens at higher pH values.

Hydrogen peroxide production by radiolysis of sodium chloride solutions containing a small amount of bromide ion

Hata, Kuniki; Inoue, Hiroyuki*; Kojima, Takao*; Iwase, Akihiro*; Kasahara, Shigeki; Hanawa, Satoshi; Ueno, Fumiyoshi; Tsukada, Takashi

Nuclear Technology, 193(3), p.434 - 443, 2016/03

https://doi.org/10.13182/NT15-32

Hardening induced by energetic electron beam for Cu-Ti alloys

Ueyama, Daichi*; Semboshi, Satoshi*; Saito, Yuichi; Ishikawa, Norito; Nishida, Kenji*; Soneda, Naoki*; Hori, Fuminobu*; Iwase, Akihiro*

Japanese Journal of Applied Physics, 53(5S1), p.05FC04_1 - 05FC04_5, 2014/05

https://doi.org/10.7567/JJAP.53.05FC04

In our previous research, it was found that the hardness of Cu-Ti alloy increased by energetic heavy ion irradiation at room temperature. In the conference, we will show the result of electron beam irradiation on the hardness of Cu-Ti alloys. We used CuTi sheets with the dimension of 10 10 0.250 mm. The specimens were irradiated at 473 K and 523 K with 2 MeV electrons. For comparison, we thermally aged some specimens at the same temperatures as that for the irradiation. The electron fluence of 8.0 10/cm corresponds to the processing time of about 10 h. As a result, the thermal aging for 10 h increases the hardness by 5 or less, which is much smaller than that by the irradiation (about 20). The hardness of the reverse side of irradiated surface is almost the same as that of the irradiated surface. The present result implies that energetic electron irradiation can be a useful tool for controlling the hardness of the "bulk" Cu-Ti alloy.

Study on ferromagnetic ordering of FeRh thin films induced by energetic heavy ion irradiation by means of X-ray magnetic circular dichroism

Aiko, Kazuma*; Toki, Atsushi*; Okuda, Shuichi*; Saito, Yuichi; Kamiya, Tomihiro; Nakamura, Tetsuya*; Kinoshita, Toyohiko*; Iwase, Akihiro*; Matsui, Toshiyuki*

Nuclear Instruments and Methods in Physics Research B, 314, p.99 - 102, 2013/11

https://doi.org/10.1016/j.nimb.2013.05.031

Magnetic Compton scattering studies of magneto-dielectric Ba(CoMn)O

Shinoda, Ryoichi*; Ito, Masayoshi*; Sakurai, Yoshiharu*; Yamamoto, Hiroyuki; Hirao, Norie; Baba, Yuji; Iwase, Akihiro*; Matsui, Toshiyuki*

Journal of Applied Physics, 113(17), p.17E307_1 - 17E307_3, 2013/05

https://doi.org/10.1063/1.4799476

We revealed that the Ba(CoMn)O (BCMO) ceramic samples exhibited ferromagnetic-dielectric behavior below the magnetic transition temperature of about 35 K. The origin of their magnetic ordering was expected to super-exchange coupling of Co()-O-Mn () with bonding angle of 180. and/or Mn()-O-Mn () with bonding angle of 90. The magnetic spin momentum estimated by the magnetic Compton profiles (MCP) of the samples had similar temperature dependence as that determined by the SQUID measurement, which meant that the observed magnetic moments could be ascribed to the spin moment. The shapes of the MCPs of the samples were completely same regardless of the temperature measured. This result indicates that there are no changes of the momentum space distribution of spin density between ferromagnetic and paramagnetic states. So, this magnetic transition is simply caused by a thermal fluctuation of the spin.

Seven cysteine-deficient mutants depict the interplay between thermal and chemical stabilities of individual cysteine residues in mitogen-activated protein kinase c-Jun N-terminal kinase 1

Nakaniwa, Tetsuko*; Fukata, Harumi*; Inoue, Tatsuya*; Goda, Masaki*; Nakai, Ryoko*; Kirii, Yasuyuki*; Adachi, Motoyasu; Tamada, Taro; Segawa, Shinichi*; Kuroki, Ryota; et al.

Biochemistry, 51(42), p.8410 - 8421, 2012/10

https://doi.org/10.1021/bi300918w

Protein kinase is a vital drug target for the treatment of a wide range of diseases. To investigate the effect of cysteine mutation on the function, stability and structure of kinase, free cysteines of c-Jun N-terminal kinase 1 (JNK1) were systematically removed by mutation. Two cysteine-destructed mutants in which three (M3) and seven (M7) cysteine residues are removed, yielded about 5 and 2 times than wild type JNK-1 (M0). SDS PAGE analysis showed that the aggregation was less in the case of M3 and M7. Thermal unfolding experiment of M0, M3 and M7 using by differential scanning calorimetry proceeded at least three state unfolding. Crystal structure of the M3 mutant was determined to 2.6 resolution, which was identical to that of the wild-type. Consequently, due to the highest yield, its improved stability against aggregation and its structural similarity to the wild type, the M3 mutant is suitable for the use of further characterization of its function and structure.